Forskjell mellom versjoner av «Metroplex 3D printer»
(→Om printeren) |
(→Programvare) |
||
| Linje 12: | Linje 12: | ||
== Programvare == | == Programvare == | ||
| + | |||
| + | Simplify3D FFF profile: | ||
| + | |||
| + | === Slicer parameters: === | ||
| + | |||
| + | ==== Fixed machine parameters: ===== | ||
| + | Nozzle: 0.4mm | ||
| + | Filament: 1.75mm | ||
| + | Extrusion multiplier: 1.0 | ||
| + | General Print speed: 70mm/s | ||
| + | Layer height: choose between 0.15 up to 0.3 mm | ||
| + | Movement speeds: X/Y/Z: 200mm/s | ||
| + | |||
| + | ==== Retraction parameters ==== | ||
| + | Retraction distance: 1.6mm | ||
| + | Retraction vertical lift: 0.6mm | ||
| + | Retraction speed: 35mm/s | ||
| + | Retraction coasting distance: 0.2mm | ||
| + | |||
| + | ==== Print parameters ==== | ||
| + | First layer height: 0.25 mm | ||
| + | First layer extrusion rate: 1.05 (105% width on Simplify3D) | ||
| + | Skirt: 3 perimeters at 3mm from part, 1 layer | ||
| + | Extruder temp: PLA: 215 C, PETG: 240 C | ||
| + | Heated bed: PLA: 60 C, PETG: 80 C | ||
| + | Cooling fan: PLA/PETG: start on layer 2 at 100% | ||
| + | Gcode: Marlin flavor | ||
| + | |||
| + | ==== Print speeds ==== | ||
| + | Outline print speed: 75% | ||
| + | Solid infill speed: 100% | ||
| + | Support speed: 100% | ||
== Historikk == | == Historikk == | ||
Revisjonen fra 7. jan. 2020 kl. 15:04
Metroplex er en Monster Kossel[1] 3D printer, designet og bygget av Jon C, som donerte den til Bitraf.
Den er fortsatt under bygging, ikke klar for bruk ennå.
Innhold
Bruk
Om printeren
- type: Kossel (delta)
- build volume (diameter x height): 400 mm x 370 mm
Programvare
Simplify3D FFF profile:
Slicer parameters:
Fixed machine parameters: =
Nozzle: 0.4mm Filament: 1.75mm Extrusion multiplier: 1.0 General Print speed: 70mm/s Layer height: choose between 0.15 up to 0.3 mm Movement speeds: X/Y/Z: 200mm/s
Retraction parameters
Retraction distance: 1.6mm Retraction vertical lift: 0.6mm Retraction speed: 35mm/s Retraction coasting distance: 0.2mm
Print parameters
First layer height: 0.25 mm First layer extrusion rate: 1.05 (105% width on Simplify3D) Skirt: 3 perimeters at 3mm from part, 1 layer Extruder temp: PLA: 215 C, PETG: 240 C Heated bed: PLA: 60 C, PETG: 80 C Cooling fan: PLA/PETG: start on layer 2 at 100% Gcode: Marlin flavor
Print speeds
Outline print speed: 75% Solid infill speed: 100% Support speed: 100%
Historikk
For historikk til byggingen, se underside om bygging.
