Forskjell mellom versjoner av «OctoPrint/testing»
Hopp til navigering
Hopp til søk
(laget underside OctoPrint/testing) |
(manual installation of OctoPrint) |
||
| Linje 3: | Linje 3: | ||
Testing av OctoPrint. | Testing av OctoPrint. | ||
| + | == Manual installation == | ||
| + | === Setup a SD card === | ||
| + | Download Raspbian Lite (currently Raspbian Buster Lite<ref>[https://www.raspberrypi.org/downloads/raspbian/ raspberrypi.org - Raspbian]</ref>) and put onto a SD card (or microSD card if that is what your Raspberry Pi requires). | ||
| + | |||
| + | Before putting the SD card into the Pi, do the following changes | ||
| + | * allow ssh by creating a filer named 'ssh' on the boot partition (cd to mountpoint of boot partition, then do <code>touch ssh</code>) | ||
| + | * mount the <code>rootfs</code> partition and change the hostname (default is raspberrypi) by editing the files etc/hostname and etc/hosts (only the line with the same name ('raspberrypi')on that partition. The name will show up on the network as '''hostname.local''', so use '''hostname-print''' for example (shows up on the network as hostname-print.local). If you mount it on a machine running Linux, you can use <code>sudo vi etc/hostname</code>, and <code>sudo nano etc/hosts</code> to edit the files. | ||
| + | |||
| + | == References == | ||
| + | <references/> | ||
[[Category:Octoprint]] [[Category:3D printing]] | [[Category:Octoprint]] [[Category:3D printing]] | ||
Revisjonen fra 21. nov. 2019 kl. 22:47
Tilbake til OctoPrint.
Testing av OctoPrint.
Manual installation
Setup a SD card
Download Raspbian Lite (currently Raspbian Buster Lite[1]) and put onto a SD card (or microSD card if that is what your Raspberry Pi requires).
Before putting the SD card into the Pi, do the following changes
- allow ssh by creating a filer named 'ssh' on the boot partition (cd to mountpoint of boot partition, then do
touch ssh) - mount the
rootfspartition and change the hostname (default is raspberrypi) by editing the files etc/hostname and etc/hosts (only the line with the same name ('raspberrypi')on that partition. The name will show up on the network as hostname.local, so use hostname-print for example (shows up on the network as hostname-print.local). If you mount it on a machine running Linux, you can usesudo vi etc/hostname, andsudo nano etc/hoststo edit the files.
