Forskjell mellom versjoner av «OctoPrint»
Hopp til navigering
Hopp til søk
| Linje 20: | Linje 20: | ||
=== Notes and tips from testing (24.11.2019) === | === Notes and tips from testing (24.11.2019) === | ||
| − | OctoPrint for Prusa i3 MK3 and MK3S | + | <h5>OctoPrint for Prusa i3 MK3 and MK3S</h5> |
| − | * | + | * Hardware Setup |
** Raspberry Pi Zero | ** Raspberry Pi Zero | ||
*** The Pi [https://manual.prusa3d.com/Guide/Einsy-case+with+the+RPi+preparation/840?lang=en mounts directly onto the Einsy board], though you will need to [https://manual.prusa3d.com/Guide/0.+Preparing+necessary+components/585?lang=en make some adjustments and print some parts]. | *** The Pi [https://manual.prusa3d.com/Guide/Einsy-case+with+the+RPi+preparation/840?lang=en mounts directly onto the Einsy board], though you will need to [https://manual.prusa3d.com/Guide/0.+Preparing+necessary+components/585?lang=en make some adjustments and print some parts]. | ||
| Linje 29: | Linje 29: | ||
*** The easiest way is to power the Pi using an external supply and connect it to the printer using a USB Type-A to Type-B cable. | *** The easiest way is to power the Pi using an external supply and connect it to the printer using a USB Type-A to Type-B cable. | ||
| − | * | + | * Software Setup |
** Download [https://github.com/guysoft/OctoPi OctoPi] and follow the instructions to set it up on the Raspberry Pi. | ** Download [https://github.com/guysoft/OctoPi OctoPi] and follow the instructions to set it up on the Raspberry Pi. | ||
** Once the Pi is powered up, it takes a couple minutes to boot up. Accessing the board in the browser over wifi using `http://octopi.local` is far from bullet-proof. It may work out-of-the-box. If not, check out [https://manpages.debian.org/testing/avahi-utils/index.html avahi-utils]. In general, SSH (`ssh pi@octopi.local`) seems to resolve the hostname more reliably, but a fallback if all else fails is to connect the Pi to your computer via an Ethernet cable and use SSH. Once logged in, the board will print its wifi IP address on the network, which you can then use instead of `octopi.local`. | ** Once the Pi is powered up, it takes a couple minutes to boot up. Accessing the board in the browser over wifi using `http://octopi.local` is far from bullet-proof. It may work out-of-the-box. If not, check out [https://manpages.debian.org/testing/avahi-utils/index.html avahi-utils]. In general, SSH (`ssh pi@octopi.local`) seems to resolve the hostname more reliably, but a fallback if all else fails is to connect the Pi to your computer via an Ethernet cable and use SSH. Once logged in, the board will print its wifi IP address on the network, which you can then use instead of `octopi.local`. | ||
Revisjonen fra 24. nov. 2019 kl. 23:14
OctoPrint[1] er en måte å få 3D-printere tilgjengelig på nettverket. OctoPrint Community Forum[2] er stedet for å få hjelp.
Undersider: testing,
Innhold
Kildekode
- OctoPrint on Github[3]
Dokumentasjon
- Setting up OctoPrint on a Raspberry Pi running Raspbian[4]
- Reverse proxy configuration examples
- Known Printer Profiles for OctoPrint
- OctoPrint - Raspberry Pi Zero W
- PiShrink for SD card backup
- OctoPrint
Notes and tips from testing (24.11.2019)
OctoPrint for Prusa i3 MK3 and MK3S
- Hardware Setup
- Raspberry Pi Zero
- The Pi mounts directly onto the Einsy board, though you will need to make some adjustments and print some parts.
- If you are using MK3S, the extra parts needed to be printed may not be available in the ZIP file. If so, use the ones available for MK3.
- Raspberry Pi 3 or 4
- The easiest way is to power the Pi using an external supply and connect it to the printer using a USB Type-A to Type-B cable.
- Raspberry Pi Zero
- Software Setup
- Download OctoPi and follow the instructions to set it up on the Raspberry Pi.
- Once the Pi is powered up, it takes a couple minutes to boot up. Accessing the board in the browser over wifi using `http://octopi.local` is far from bullet-proof. It may work out-of-the-box. If not, check out avahi-utils. In general, SSH (`ssh pi@octopi.local`) seems to resolve the hostname more reliably, but a fallback if all else fails is to connect the Pi to your computer via an Ethernet cable and use SSH. Once logged in, the board will print its wifi IP address on the network, which you can then use instead of `octopi.local`.
- __Pi Zero Only__ There are a few extra steps related to pins and ports to make the printer available in OctoPrint.
- For OctoPrint setup (and more), follow the instructions in this video. Here are a variety of printer profiles for reference.
- Setting up a webcam or a Raspberry Pi Camera Module is straightforward. Simply connect (and reboot the Pi).
- Extras
- You can use OctoPrint-ipOnConnect for the nice feature of showing the printer's IP address on the LCD display upon bootup.
- @TODO Setting up Slic3r
Relevante FAQ'er
- koble OctoPrint til en Prusa MK3 via usb[5]
- OctoPrint og MMU2[6]
- How can I manually restore a backup created with the Backup & Restore plugin?
- OctoPrint can't connect to my printer
