Forskjell mellom versjoner av «OctoPrint/testing»
Hopp til navigering
Hopp til søk
(manual installation of OctoPrint) |
(→Manual installation: initial setup) |
||
| Linje 11: | Linje 11: | ||
* allow ssh by creating a filer named 'ssh' on the boot partition (cd to mountpoint of boot partition, then do <code>touch ssh</code>) | * allow ssh by creating a filer named 'ssh' on the boot partition (cd to mountpoint of boot partition, then do <code>touch ssh</code>) | ||
* mount the <code>rootfs</code> partition and change the hostname (default is raspberrypi) by editing the files etc/hostname and etc/hosts (only the line with the same name ('raspberrypi')on that partition. The name will show up on the network as '''hostname.local''', so use '''hostname-print''' for example (shows up on the network as hostname-print.local). If you mount it on a machine running Linux, you can use <code>sudo vi etc/hostname</code>, and <code>sudo nano etc/hosts</code> to edit the files. | * mount the <code>rootfs</code> partition and change the hostname (default is raspberrypi) by editing the files etc/hostname and etc/hosts (only the line with the same name ('raspberrypi')on that partition. The name will show up on the network as '''hostname.local''', so use '''hostname-print''' for example (shows up on the network as hostname-print.local). If you mount it on a machine running Linux, you can use <code>sudo vi etc/hostname</code>, and <code>sudo nano etc/hosts</code> to edit the files. | ||
| + | |||
| + | === Initial setup === | ||
| + | Insert the SD card into your Pi, connect it to a network and power it up. From your machine, you can find out when the machine is available on the network with [[Wikipedia:ping (networking utility)]], example <code>ping hostname-print.local</code>. | ||
| + | |||
| + | ssh into the machine (ssh pi@hostname-print.local) withnthe default user and password. | ||
| + | # change the password: <code>passwd</code> | ||
| + | # check if the user is a member of the required groups, if not, add it. <code>sudo usermod -a -G tty pi</code>, <code>sudo usermod -a -G dialout pi</code>. | ||
== References == | == References == | ||
Revisjonen fra 21. nov. 2019 kl. 22:57
Tilbake til OctoPrint.
Testing av OctoPrint.
Manual installation
Setup a SD card
Download Raspbian Lite (currently Raspbian Buster Lite[1]) and put onto a SD card (or microSD card if that is what your Raspberry Pi requires).
Before putting the SD card into the Pi, do the following changes
- allow ssh by creating a filer named 'ssh' on the boot partition (cd to mountpoint of boot partition, then do
touch ssh) - mount the
rootfspartition and change the hostname (default is raspberrypi) by editing the files etc/hostname and etc/hosts (only the line with the same name ('raspberrypi')on that partition. The name will show up on the network as hostname.local, so use hostname-print for example (shows up on the network as hostname-print.local). If you mount it on a machine running Linux, you can usesudo vi etc/hostname, andsudo nano etc/hoststo edit the files.
Initial setup
Insert the SD card into your Pi, connect it to a network and power it up. From your machine, you can find out when the machine is available on the network with Wikipedia:ping (networking utility), example ping hostname-print.local.
ssh into the machine (ssh pi@hostname-print.local) withnthe default user and password.
- change the password:
passwd - check if the user is a member of the required groups, if not, add it.
sudo usermod -a -G tty pi,sudo usermod -a -G dialout pi.
