Forskjell mellom versjoner av «DragonFly 3D printer»
Hopp til navigering
Hopp til søk
(→Historikk: first layer calibration done) |
(→Historikk: firmware already upgraded. Thank you, nameless somebody!) |
||
| Linje 14: | Linje 14: | ||
== Historikk == | == Historikk == | ||
| + | ; 2020-08-19 : checked firmware - the printer already has 3.9.0-3421. | ||
| + | |||
; 2019-11-23 : done first layer calibration until I was happy with the result. | ; 2019-11-23 : done first layer calibration until I was happy with the result. | ||
: flashed firmware to 3.8.1-2869 with PrusaSlicer and a usb cable. | : flashed firmware to 3.8.1-2869 with PrusaSlicer and a usb cable. | ||
Revisjonen fra 19. aug. 2020 kl. 14:45
DragonFly er en Original Prusa i3 MK3S[1], kjøpt som byggesett fra Prusa Research[2].
Undersider: bygging,
Bruk: se siden 3D printing.
Om printeren
Her skal det stå litt om printeren.
- nozzle: 0.4 mm
- Hostnavn:
dragonfly-print.local
Firmware
Firmware version: 3.8.1-2869
Historikk
- 2020-08-19
- checked firmware - the printer already has 3.9.0-3421.
- 2019-11-23
- done first layer calibration until I was happy with the result.
- flashed firmware to 3.8.1-2869 with PrusaSlicer and a usb cable.
- "lapper" på printeren "19/11-01 nozzle scraping up plate", "filament jam 9/11-19"
- 2019-11-23
- denne siden ble opprettet.
