Forskjell mellom versjoner av «HEDMA»
Hopp til navigering
Hopp til søk
(→Maskin: power supply) |
|||
| Linje 12: | Linje 12: | ||
=== Power supply === | === Power supply === | ||
We are using the Powercore V1. Manual<ref>https://github.com/Rack-Robotics/Powercore-V1.0-Manual</ref>, hardware<ref>https://github.com/Rack-Robotics/Powercore-V1.0-Hardware</ref>, firmware<ref>https://github.com/Rack-Robotics/Powercore-V1.0-Firmware</ref>. | We are using the Powercore V1. Manual<ref>https://github.com/Rack-Robotics/Powercore-V1.0-Manual</ref>, hardware<ref>https://github.com/Rack-Robotics/Powercore-V1.0-Hardware</ref>, firmware<ref>https://github.com/Rack-Robotics/Powercore-V1.0-Firmware</ref>. | ||
| + | |||
| + | == Programware / software == | ||
| + | EDMWeb<ref>https://github.com/Rack-Robotics/EDMWeb</ref> is the CAM software used. | ||
== Bruk == | == Bruk == | ||
Revisjonen fra 20. mar. 2024 kl. 19:33
HEDMA is a hackable homemade EDM[1] machine.
Documentation is in the FabricateEDM[2] repository.
Innhold
Maskin / Machine
The machine is homemade, using existing machines and parts.
Motion platform
The motion platform is a Ultimaker 1[3] 3D printer.
Power supply
We are using the Powercore V1. Manual[4], hardware[5], firmware[6].
Programware / software
EDMWeb[7] is the CAM software used.
Bruk
Referanser
- ↑ EDM
- ↑ https://github.com/Fabricatable-Machines/FabricateEDM FabricateEDM
- ↑ https://reprap.org/wiki/Ultimaker Ultimaker
- ↑ https://github.com/Rack-Robotics/Powercore-V1.0-Manual
- ↑ https://github.com/Rack-Robotics/Powercore-V1.0-Hardware
- ↑ https://github.com/Rack-Robotics/Powercore-V1.0-Firmware
- ↑ https://github.com/Rack-Robotics/EDMWeb
