Forskjell mellom versjoner av «HEDMA»
Hopp til navigering
Hopp til søk
(→Maskin: motion platform) |
(→Maskin: power supply) |
||
| Linje 4: | Linje 4: | ||
| − | == Maskin == | + | == Maskin / Machine == |
The machine is homemade, using existing machines and parts. | The machine is homemade, using existing machines and parts. | ||
=== Motion platform === | === Motion platform === | ||
The motion platform is a Ultimaker 1<ref>https://reprap.org/wiki/Ultimaker Ultimaker</ref> 3D printer. | The motion platform is a Ultimaker 1<ref>https://reprap.org/wiki/Ultimaker Ultimaker</ref> 3D printer. | ||
| + | |||
| + | === Power supply === | ||
| + | We are using the Powercore V1. Manual<ref>https://github.com/Rack-Robotics/Powercore-V1.0-Manual</ref>, hardware<ref>https://github.com/Rack-Robotics/Powercore-V1.0-Hardware</ref>, firmware<ref>https://github.com/Rack-Robotics/Powercore-V1.0-Firmware</ref>. | ||
== Bruk == | == Bruk == | ||
Revisjonen fra 20. mar. 2024 kl. 19:30
HEDMA is a hackable homemade EDM[1] machine.
Documentation is in the FabricateEDM[2] repository.
Maskin / Machine
The machine is homemade, using existing machines and parts.
Motion platform
The motion platform is a Ultimaker 1[3] 3D printer.
Power supply
We are using the Powercore V1. Manual[4], hardware[5], firmware[6].
