Forskjell mellom versjoner av «Formlabs Form1+»
Hopp til navigering
Hopp til søk
(created Formlabs Form1+ page) |
(lagt inn seksjon Dokumentasjon) |
||
| Linje 28: | Linje 28: | ||
Det finnes også "castable resin" - kan brennes ut av gipsformer (til støping), fleksible resin | Det finnes også "castable resin" - kan brennes ut av gipsformer (til støping), fleksible resin | ||
| + | |||
| + | == Dokumentasjon == | ||
| + | først | ||
| + | * [https://support.formlabs.com/s/article/Safety Safety] | ||
| + | * [https://support.formlabs.com/s/article/Resin-Care Resin Care] | ||
| + | * [https://support.formlabs.com/s/article/Get-Ready-to-Receive-Your-Printer Get Ready to Receive Your Form 1+ Printer] | ||
| + | * [https://support.formlabs.com/s/article/Unpacking-your-Printer Unpacking your Form 1+ Printer] | ||
| + | |||
| + | Forberedelse og bruk | ||
| + | * [https://support.formlabs.com/s/article/Set-Up-the-Form-1 Set Up the Form 1+] | ||
| + | * [https://support.formlabs.com/s/article/Filling-the-Resin-Tank Filling the Form 1+ Resin Tank] | ||
| + | * [https://support.formlabs.com/s/article/Refilling-the-Resin-Tank-while-Printing Refilling the Form 1+ Resin Tank while Printing] | ||
| + | * [https://support.formlabs.com/s/article/Checking-the-Resin-Tank Checking the Form 1+ Resin Tank] | ||
| + | |||
| + | Vedlikehold | ||
| + | * [https://support.formlabs.com/s/article/Form-1-Care Form 1+ Care] | ||
| + | * [https://support.formlabs.com/s/article/Resin-Tank-Care Form 1+ Resin Tank Care] | ||
| + | * [https://support.formlabs.com/s/article/Replacing-the-Resin-Tank Replacing the Form 1+ Resin Tank] | ||
| + | * [https://support.formlabs.com/s/article/Checking-the-Form-1-Mirror Checking the Form 1+ Mirror] | ||
| + | * [https://support.formlabs.com/s/article/Cleaning-the-Form-1-Mirror Cleaning the Form 1+ Mirror] | ||
| + | |||
| + | Feilsøking | ||
| + | * [https://support.formlabs.com/s/article/Fine-Tuning-the-Form-1 Fine Tuning the Form 1+] | ||
| + | * [https://support.formlabs.com/s/article/Issues-While-Printing Issues While Printing (Form 1+)] | ||
| + | * [https://support.formlabs.com/s/article/Cleaning-after-a-Failed-Print Cleaning after a Failed Print (Form 1+)] | ||
| + | * [https://support.formlabs.com/s/article/Print-Defects Print Defects (Form 1+)] | ||
| + | * [https://support.formlabs.com/s/article/Hardware-Issues Form 1+ Hardware Issues] | ||
| + | * [https://support.formlabs.com/s/article/Shipping-Your-Form-1 Shipping Your Form 1+] | ||
== Referanser == | == Referanser == | ||
Revisjonen fra 9. mai 2019 kl. 11:18
Bitraf har en formlabs[1] Form1+ 3D printer. Dette er en resin-printer[2].
Bruk
Vedlikehold
Om printeren
- byggevolum: 125 x 125 x 165 mm
- laghøyde (akse oppløsning): 25, 50 eller 100 mikrometer
- fysisk størrelse: 30 x 28 x 45 cm
- vekt: 8 kg
- strømforsyning: 100 - 240 VAC, 1.5 A, 50/60 Hz, 60W
- laser: EN 60825-1:2007 sertifisert, Class 1 Laser, 405nm violet laser
- print-teknologi: stereolitography (SLA)
- støttemateriale ("support"): automatisk generert, lett å fjerne
Finishing kit inneholder
- finishing tray
- scraper
- Pre and post-rinse tubs
- rinse basket
- squeeze bottle
- flush cutters
- tweezers
- disposable nitrile gloves
Standard resin[3] finnes i fargene hvit (white), grå (grey) og sort (black). I tillegg finnes blank (clear) resin.
Det finnes også "castable resin" - kan brennes ut av gipsformer (til støping), fleksible resin
Dokumentasjon
først
Forberedelse og bruk
- Set Up the Form 1+
- Filling the Form 1+ Resin Tank
- Refilling the Form 1+ Resin Tank while Printing
- Checking the Form 1+ Resin Tank
Vedlikehold
- Form 1+ Care
- Form 1+ Resin Tank Care
- Replacing the Form 1+ Resin Tank
- Checking the Form 1+ Mirror
- Cleaning the Form 1+ Mirror
Feilsøking
- Fine Tuning the Form 1+
- Issues While Printing (Form 1+)
- Cleaning after a Failed Print (Form 1+)
- Print Defects (Form 1+)
- Form 1+ Hardware Issues
- Shipping Your Form 1+
