CNC3-3018Pro

CNC3-3018Pro er en liten CNC-fres kjøpt som byggesett fra AliExpress.

Undersider: bygging, testing,

Firmware

Det er GRBL versjon 1.1 som kjører på kontrollerkortet. Kommandoen '$I' (informasjon on versjon og build) melder

[VER:1.1f.20170801:]
[OPT:V,15,128]
ok

det er nyeste release per dags dato.

Innstillinger

Innstillinger og parametre satt i firmware. Settings ('$$')

$0=10
$1=25
$2=0
$3=5
$4=0
$5=0
$6=0
$10=1
$11=0.010
$12=0.002
$13=0
$20=0
$21=0
$22=0
$23=0
$24=25.000
$25=500.000
$26=250
$27=1.000
$30=1000
$31=0
$32=0
$100=800.000
$101=800.000
$102=800.000
$110=800.000
$111=800.000
$112=600.000
$120=10.000
$121=10.000
$122=10.000
$130=200.000
$131=200.000
$132=200.000
ok

parametre ('$#')

[G54:0.000,0.000,0.000]
[G55:0.000,0.000,0.000]
[G56:0.000,0.000,0.000]
[G57:0.000,0.000,0.000]
[G58:0.000,0.000,0.000]
[G59:0.000,0.000,0.000]
[G28:0.000,0.000,0.000]
[G30:0.000,0.000,0.000]
[G92:0.000,0.000,0.000]
[TLO:0.000]
[PRB:0.000,0.000,0.000:0]
ok

Tekniske spesifikasjoner

fra produktet hos AliExpress

• working area : 30x18x4.5cm
• Frame size : 33x40x24cm
• Mesa : 30x18cm
• Spindle : 775 spindle motor (12-36V) 24V: 10000r/min
• Spindle Chuck: ER11 or normal chunk
• Step motor : Fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/M
• Power supply : 24V 5.6A
• Software : GRBL controller (Firmware GRBL v1.1)
• clamps: 4 pcs, Hold the thickness of 0-30mm,size: 50 * 20 * 3 (length * width * thick), the inner slot width 6mm
• Drill bits: tip 0.1mm ,20 degree , diameter3.175mm.the package include 10pc

vår maskin er uten opsjon for laser.

Strømforsyningen er ekstern ("laptop type"), Lite-On EPS-5, model EADP-75GB A. Inn: 100 - 240 V AC, 50 - 60 Hz, ~ 1.3A. Ut: 24 V DC (center positive), 5A. Strømkabelen er en med liggende-åttetall plugg ("barbermaskin type") i ene enden, og USA-plugg + adapter i andre enden.

Dokumentasjon

• Fil:GRBL software Instructions CNC3-3018Pro.pdf
• Fil:Woodpecker CNC User Manual V1.1 CNC3-3018Pro.pdf