Bite
Hopp til navigering
Hopp til søk
{{#invoke:Infobox|infobox}}
Innhold
nettverk
br0 har fast adresse på det lokale nettverket, 10.13.37.3. br1 har fast adresse på det eksterne nettverket, 77.40.158.102. bite sin ruter er powertech sin, nemlig 77.40.158.97.
virtuelle maskiner kan bli med i br0, og/eller br1 avhengig av hvilke nettverk de skal være på
Virtuelle maskiner
Bite er stort sett host for en del VMer. Vi bruker både QEMU og LXC for virtualisering.
vm'er på bite
$ sudo virsh list Id Name State ----------------------------------------- 1 iot running 2 zabbix.karlsbakk.net running 3 heim running 4 francesco.karlsbakk.net running 5 p2k16-production running 6 riemann running 7 p2k16-staging running 8 p2k16 running 9 ssh.karlsbakk.net running 10 dlock running 11 unifi running
En av disse er tenkt å kjøre Dockers.
Home assistant docker
Som eksempel er Home Assistant (snart) satt opp som en Docker på en av maskinene.
Hjemmeområde for medlemmer
Heim er en egen virtuell server.
styre virtuelle maskiner
det går an å styre de virtuelle maskinene på bite over nettverket: Remote Management of Guests
LXC
lxc-create \ -B zfs --zfsroot=pool0/lxc \ -t debian \ --name=$NAME -- \ -r stretch
HP Smart Array P410i
- https://communities.vmware.com/thread/484114
- https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/P410i-amp-JBOD/td-p/5210876
- https://amk1.wordpress.com/2013/11/22/zfs-with-hp-smart-array-p410i/
- http://www.thegeekstuff.com/2014/07/hpacucli-examples
- http://h20564.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_04bffb688a73438598fef81ddd
=> controller slot=0 show config detail [...] Firmware Version: 6.00-2 [...] => controller slot=0 modify hbamode=on forced Error: Syntax error at "hbamode" =>
Drives
Logiske drives i maskina.
tingo@bite:~$ sudo hpacucli controller slot=0 logicaldrive all show
Smart Array P410i in Slot 0 (Embedded)
array A
logicaldrive 1 (465.7 GB, RAID 1, OK)
Fysiske disker i maskina.
tingo@bite:~$ sudo hpacucli controller slot=0 physicaldrive all show
Smart Array P410i in Slot 0 (Embedded)
array A
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, Solid State SATA, 500 GB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, Solid State SATA, 500 GB, OK)
unassigned
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 146 GB, OK)
physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 146 GB, OK)
physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SAS, 146 GB, OK)
physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SAS, 146 GB, Predictive Failure)
physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SAS, 146 GB, OK)
physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SAS, 146 GB, OK)
Logg
(Signer loggen ved å legge til --~~~~) på en egen linje på slutten av innlegget eller trykk på signatur-knappen i menyen).
2023
- 2023-08-23
- restarted bite this evening. On first start, it hung (no unusal error messages). On second start it started normally. Tingo (diskusjon) 23. aug. 2023 kl. 19:44 (CEST)
- 2023-08-22
- uptime status
tingo@bite:~$ date;uptime Tue 22 Aug 2023 09:42:20 PM CEST 21:42:20 up 2:58, 1 user, load average: 0.38, 0.39, 0.41
Tingo (diskusjon) 22. aug. 2023 kl. 21:43 (CEST)
- 2023-08-22
- physical and logical drive info
tingo@bite:~$ sudo hpacucli controller slot=0 physicaldrive all show
Smart Array P410i in Slot 0 (Embedded)
array A
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, Solid State SATA, 500 GB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, Solid State SATA, 500 GB, OK)
tingo@bite:~$ sudo hpacucli controller slot=0 logicaldrive all show
Smart Array P410i in Slot 0 (Embedded)
array A
logicaldrive 1 (465.7 GB, RAID 1, OK)
Tingo (diskusjon) 22. aug. 2023 kl. 19:39 (CEST)
- 2023-08-22
- memory info
tingo@bite:~$ sudo lshw -c memory -short H/W path Device Class Description ================================================================ /0/0 memory 64KiB BIOS /0/400/710 memory 192KiB L1 cache /0/400/720 memory 1536KiB L2 cache /0/400/730 memory 12MiB L3 cache /0/406/716 memory 192KiB L1 cache /0/406/726 memory 1536KiB L2 cache /0/406/736 memory 12MiB L3 cache /0/1000 memory 192GiB System Memory /0/1000/0 memory DIMM DDR3 Synchronous [empty] /0/1000/1 memory 16GiB DIMM DDR3 Synchronous 1067 MHz (0.9 ns) /0/1000/2 memory 16GiB DIMM DDR3 Synchronous 1067 MHz (0.9 ns) /0/1000/3 memory DIMM DDR3 Synchronous [empty] /0/1000/4 memory 16GiB DIMM DDR3 Synchronous 1067 MHz (0.9 ns) /0/1000/5 memory 16GiB DIMM DDR3 Synchronous 1067 MHz (0.9 ns) /0/1000/6 memory DIMM DDR3 Synchronous [empty] /0/1000/7 memory 16GiB DIMM DDR3 Synchronous 1067 MHz (0.9 ns) /0/1000/8 memory 16GiB DIMM DDR3 Synchronous 1067 MHz (0.9 ns) /0/1000/9 memory DIMM DDR3 Synchronous [empty] /0/1000/a memory 16GiB DIMM DDR3 Synchronous 1067 MHz (0.9 ns) /0/1000/b memory 16GiB DIMM DDR3 Synchronous 1067 MHz (0.9 ns) /0/1000/c memory DIMM DDR3 Synchronous [empty] /0/1000/d memory 16GiB DIMM DDR3 Synchronous 1067 MHz (0.9 ns) /0/1000/e memory 16GiB DIMM DDR3 Synchronous 1067 MHz (0.9 ns) /0/1000/f memory DIMM DDR3 Synchronous [empty] /0/1000/10 memory 16GiB DIMM DDR3 Synchronous 1067 MHz (0.9 ns) /0/1000/11 memory 16GiB DIMM DDR3 Synchronous 1067 MHz (0.9 ns)
So 192 GiB memory in total. Tingo (diskusjon) 22. aug. 2023 kl. 19:22 (CEST)
- 2023-08-22
- CPU info
tingo@bite:~$ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian Address sizes: 40 bits physical, 48 bits virtual CPU(s): 24 On-line CPU(s) list: 0-23 Thread(s) per core: 2 Core(s) per socket: 6 Socket(s): 2 NUMA node(s): 2 Vendor ID: GenuineIntel CPU family: 6 Model: 44 Model name: Intel(R) Xeon(R) CPU X5670 @ 2.93GHz Stepping: 2 CPU MHz: 1910.524 CPU max MHz: 2933.0000 CPU min MHz: 1600.0000 BogoMIPS: 5864.98 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 256K L3 cache: 12288K NUMA node0 CPU(s): 0,2,4,6,8,10,12,14,16,18,20,22 NUMA node1 CPU(s): 1,3,5,7,9,11,13,15,17,19,21,23 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm epb pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid dtherm ida arat flush_l1d
So two 6-core 12-threads Xeon CPUs. Tingo (diskusjon) 22. aug. 2023 kl. 19:17 (CEST)
- 2023-08-22
- Debian info
tingo@bite:~$ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 10 (buster) Release: 10 Codename: buster tingo@bite:~$ cat /etc/debian_version 10.13
kernel
tingo@bite:~$ uname -a Linux bite 5.10.0-0.deb10.16-amd64 #1 SMP Debian 5.10.127-2~bpo10+1 (2022-07-28) x86_64 GNU/Linux
perhaps we should upgrade. Tingo (diskusjon) 22. aug. 2023 kl. 19:09 (CEST)
- 2023-08-22
- Power button off / on. No errors, it just powered on.ipmi info - log
tingo@bite:~$ sudo ipmitool sel info SEL Information Version : 1.5 (v1.5, v2 compliant) Entries : 15 Free Space : 784 bytes Percent Used : 23% Last Add Time : 08/04/2023 08:18:35 Last Del Time : 05/05/2011 21:03:22 Overflow : false Supported Cmds : 'Reserve' tingo@bite:~$ sudo ipmitool sel list 1 | 01/27/2012 | 18:38:47 | Power Supply #0x03 | Failure detected | Asserted 2 | 01/27/2012 | 18:59:50 | Power Supply #0x03 | Failure detected | Asserted 3 | 01/27/2012 | 19:32:23 | Power Supply #0x03 | Failure detected | Asserted 4 | 01/27/2012 | 19:32:30 | Power Supply #0x03 | Failure detected | Asserted 5 | 02/18/2015 | 10:53:37 | Power Supply #0x04 | Failure detected | Asserted 6 | 02/18/2015 | 11:28:47 | Power Supply #0x04 | Failure detected | Asserted 7 | 02/18/2015 | 11:49:09 | Power Supply #0x03 | Failure detected | Asserted 8 | 09/21/2017 | 14:41:16 | Fan #0x08 | Transition to Off Line | Asserted 9 | 09/21/2017 | 14:41:16 | Fan #0x08 | Transition to Running | Deasserted a | 09/21/2017 | 14:42:57 | Fan #0x08 | Transition to Running | Deasserted b | 09/21/2017 | 14:43:10 | Fan #0x08 | Transition to Off Line | Asserted c | 09/21/2017 | 14:43:54 | Power Supply #0x04 | Failure detected | Asserted d | 09/23/2017 | 15:31:23 | Power Supply #0x04 | Failure detected | Asserted e | 09/23/2017 | 18:40:21 | Power Supply #0x04 | Failure detected | Asserted f | 08/04/2023 | 08:18:35 | Power Supply #0x03 | Failure detected | Asserted
no new entries since the last time I checked. Sensors
tingo@bite:~$ sudo ipmitool sdr UID Light | 0x00 | ok Sys. Health LED | 0x00 | ok Power Supply 1 | 60 Watts | ok Power Supply 2 | 80 Watts | ok Power Supplies | 0x00 | ok Fan 1 | 29.40 percent | ok Fan 2 | 34.89 percent | ok Fan 3 | 41.16 percent | ok Fan 4 | 41.16 percent | ok Fan 5 | 34.89 percent | ok Fan 6 | 13.72 percent | ok Fans | 0x00 | ok Temp 1 | 29 degrees C | ok Temp 2 | 40 degrees C | ok Temp 3 | 40 degrees C | ok Temp 4 | 41 degrees C | ok Temp 5 | 42 degrees C | ok Temp 6 | 45 degrees C | ok Temp 7 | 47 degrees C | ok Temp 8 | 45 degrees C | ok Temp 9 | 42 degrees C | ok Temp 10 | 50 degrees C | ok Temp 11 | 40 degrees C | ok Temp 12 | 47 degrees C | ok Temp 13 | 37 degrees C | ok Temp 14 | 38 degrees C | ok Temp 15 | 37 degrees C | ok Temp 16 | disabled | ns Temp 17 | disabled | ns Temp 18 | disabled | ns Temp 19 | 31 degrees C | ok Temp 20 | 36 degrees C | ok Temp 21 | 38 degrees C | ok Temp 22 | 37 degrees C | ok Temp 23 | 43 degrees C | ok Temp 24 | 41 degrees C | ok Temp 25 | 39 degrees C | ok Temp 26 | 41 degrees C | ok Temp 27 | disabled | ns Temp 28 | disabled | ns Temp 29 | 35 degrees C | ok Temp 30 | 69 degrees C | ok Memory | 0x00 | ok Power Meter | 172 Watts | ok
Values are reasonable, and the server currently draws 172 Watts. General health
tingo@bite:~$ sudo ipmitool -I open chassis status System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Front Panel Control : none
looks ok. Tingo (diskusjon) 22. aug. 2023 kl. 19:02 (CEST)
- 2023-08-14
- log from ipmi
tingo@bite:~$ sudo ipmitool sel info SEL Information Version : 1.5 (v1.5, v2 compliant) Entries : 15 Free Space : 784 bytes Percent Used : 23% Last Add Time : 08/04/2023 08:18:35 Last Del Time : 05/05/2011 21:03:22 Overflow : false Supported Cmds : 'Reserve' tingo@bite:~$ sudo ipmitool sel list 1 | 01/27/2012 | 18:38:47 | Power Supply #0x03 | Failure detected | Asserted 2 | 01/27/2012 | 18:59:50 | Power Supply #0x03 | Failure detected | Asserted 3 | 01/27/2012 | 19:32:23 | Power Supply #0x03 | Failure detected | Asserted 4 | 01/27/2012 | 19:32:30 | Power Supply #0x03 | Failure detected | Asserted 5 | 02/18/2015 | 10:53:37 | Power Supply #0x04 | Failure detected | Asserted 6 | 02/18/2015 | 11:28:47 | Power Supply #0x04 | Failure detected | Asserted 7 | 02/18/2015 | 11:49:09 | Power Supply #0x03 | Failure detected | Asserted 8 | 09/21/2017 | 14:41:16 | Fan #0x08 | Transition to Off Line | Asserted 9 | 09/21/2017 | 14:41:16 | Fan #0x08 | Transition to Running | Deasserted a | 09/21/2017 | 14:42:57 | Fan #0x08 | Transition to Running | Deasserted b | 09/21/2017 | 14:43:10 | Fan #0x08 | Transition to Off Line | Asserted c | 09/21/2017 | 14:43:54 | Power Supply #0x04 | Failure detected | Asserted d | 09/23/2017 | 15:31:23 | Power Supply #0x04 | Failure detected | Asserted e | 09/23/2017 | 18:40:21 | Power Supply #0x04 | Failure detected | Asserted f | 08/04/2023 | 08:18:35 | Power Supply #0x03 | Failure detected | Asserted
Not guaranteed that time and date has been correct always. Tingo (diskusjon) 14. aug. 2023 kl. 20:03 (CEST)
- 2023-08-14
- state of server hardware
tingo@bite:~$ sudo ipmitool -I open chassis status System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Front Panel Control : none
Tingo (diskusjon) 14. aug. 2023 kl. 19:51 (CEST)
- 2023-08-14
- ipmi - various info gathered
Device ID : 19
Device Revision : 1
Firmware Revision : 1.26
IPMI Version : 2.0
Manufacturer ID : 11
Manufacturer Name : Hewlett-Packard
Product ID : 8192 (0x2000)
Product Name : Unknown (0x2000)
Device Available : yes
Provides Device SDRs : yes
Additional Device Support :
Sensor Device
SDR Repository Device
SEL Device
FRU Inventory Device
tingo@bite:~$ sudo ipmitool mc getsysinfo system_name
ProLiant DL380 G7
sensors
tingo@bite:~$ sudo ipmitool sdr UID Light | 0x00 | ok Sys. Health LED | 0x00 | ok Power Supply 1 | 55 Watts | ok Power Supply 2 | 80 Watts | ok Power Supplies | 0x00 | ok Fan 1 | 29.40 percent | ok Fan 2 | 33.71 percent | ok Fan 3 | 39.98 percent | ok Fan 4 | 39.98 percent | ok Fan 5 | 33.71 percent | ok Fan 6 | 13.72 percent | ok Fans | 0x00 | ok Temp 1 | 26 degrees C | ok Temp 2 | 40 degrees C | ok Temp 3 | 40 degrees C | ok Temp 4 | 40 degrees C | ok Temp 5 | 41 degrees C | ok Temp 6 | 41 degrees C | ok Temp 7 | 43 degrees C | ok Temp 8 | 42 degrees C | ok Temp 9 | 39 degrees C | ok Temp 10 | 47 degrees C | ok Temp 11 | 38 degrees C | ok Temp 12 | 45 degrees C | ok Temp 13 | 34 degrees C | ok Temp 14 | 35 degrees C | ok Temp 15 | 34 degrees C | ok Temp 16 | disabled | ns Temp 17 | disabled | ns Temp 18 | disabled | ns Temp 19 | 30 degrees C | ok Temp 20 | 33 degrees C | ok Temp 21 | 35 degrees C | ok Temp 22 | 34 degrees C | ok Temp 23 | 41 degrees C | ok Temp 24 | 39 degrees C | ok Temp 25 | 36 degrees C | ok Temp 26 | 37 degrees C | ok Temp 27 | disabled | ns Temp 28 | disabled | ns Temp 29 | 35 degrees C | ok Temp 30 | 67 degrees C | ok Memory | 0x00 | ok Power Meter | 172 Watts | ok
Tingo (diskusjon) 14. aug. 2023 kl. 19:48 (CEST)
2022
- 2022-08-16
- the server was down due to a local power problem (the circuit breaker for the server room had tripped) and came back up automatically when power was restored. Tingo (diskusjon) 16. aug. 2022 kl. 11:15 (CEST)
- 2022-08-12
- after a planned power outage (work on the local power grid), bite restarted automatically when power returned, and all services on it started too. Tingo (diskusjon) 12. aug. 2022 kl. 11:48 (CEST)
- 2022-07-23
- bite was down / offline. Initial reports yesterday, about 21:00 hours local time. I got notified this morning. Accessed bite via iLO; everything looked ok - green lights across the board. No indication in logs (iLo Event Log, Integrated Management Log) that anything was wrong. Tried restarting the server (graceful power off / on, forced power off / on, reset) nothing worked. Even tried the physical power button on the server - it didn't work either. Got remote console working (integrated Java Remote Console, via JavaFox) and was able to see this error message on the console
Fatal PCI Express Device Error PCI Slot ? B00/D00/F00
relevant hits on the internet suggested re-seating the PCI cards in the server (one of the PCI cards is the RAID controller), so I did that. Unplug power, take off top cover, unscrew three thumbscrews on the back, lift out the PCI cage using the handles, take out the two PCI cards and put them back in. Re-assemble everything, power on the server. This time the remote console showed that it booted to Debian login. Some minutes later ( 10 - 15 minutes) all the virtual machines was up and running, and p2k16 worked again. Relevant internet info:
- Proliant DL380 G7 Fatal PCI Express Device Error PCI ? B00/D00/F00[1]
- HP ProLiant Servers - Error "PCI express device error PCI slot? 86" When the Server Powers On[2]
Tingo (diskusjon) 23. jul. 2022 kl. 14:53 (CEST)
- 2022-05-07
- today, after a power outage, bite didn't boot fully. power was on, and it was possible to access the machine via iLO (web or ssh). Unfortunately, the remote console via iLO doesn't work - web requires java (but Javafox doesn't work), ssh to iLo and then textcons works, but Linux uses an "unsupported graphics mode" for its console. Anyway, no error messages or problems seen in iLO and logs there. Rebooting from iLo (cold boot) didn't help. Finally I restarted the machine with the power button (I also had a local console (vga monitor plus usb keyboard attached), then it came up normally. Everything seems to work now. Maybe this hardware is getting to old? Tingo (diskusjon) 7. mai 2022 kl. 14:46 (CEST)
2021
- 2021-02-16
- tonight we switched the two upper disk drives in the exteranl chassis, to figure out if the anomaly is with the drive or the slot in the chassis.
tingo@bite:~$ sudo smartctl -i /dev/sdb smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZGY7LN54 Firmware Version: 0958 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Tue Feb 16 20:18:06 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled tingo@bite:~$ sudo smartctl -i /dev/sdc smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZGY7KZNL LU WWN Device Id: 5 000c50 0c6c55c55 Firmware Version: SC60 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Feb 16 20:19:19 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled tingo@bite:~$ sudo smartctl -i /dev/sdd smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZGY7M1EN LU WWN Device Id: 5 000c50 0c6c8b047 Firmware Version: SC60 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Feb 16 20:19:36 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled tingo@bite:~$ sudo smartctl -i /dev/sde smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZGY7P7JN LU WWN Device Id: 5 000c50 0c6da4787 Firmware Version: SC60 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Feb 16 20:19:59 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled
Unfortunately, the anomaly floows the slot (it is the topmost slot in the external chassis), not the drive. Tingo (diskusjon) 16. feb. 2021 kl. 21:12 (CET)
- 2021-02-12
- we had some trouble with the disk drives in the external chassis, here I document what smartctl reports for the drives.
tingo@bite:~$ sudo smartctl -i /dev/sdb smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZGY7KZNL Firmware Version: 0958 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Fri Feb 12 09:36:26 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled tingo@bite:~$ sudo smartctl -i /dev/sdc smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZGY7LN54 LU WWN Device Id: 5 000c50 0c6c868a0 Firmware Version: SC60 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Feb 12 09:36:33 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled tingo@bite:~$ sudo smartctl -i /dev/sdd smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZGY7M1EN LU WWN Device Id: 5 000c50 0c6c8b047 Firmware Version: SC60 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Feb 12 09:36:51 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled tingo@bite:~$ sudo smartctl -i /dev/sde smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZGY7P7JN LU WWN Device Id: 5 000c50 0c6da4787 Firmware Version: SC60 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Feb 12 09:36:55 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled
Tingo (diskusjon) 16. feb. 2021 kl. 21:06 (CET)
- 2021-02-10
- Bite er oppgradert til Debian 10.8 av Trygvis.
tingo@bite:~$ cat /etc/debian_version 10.8
kernel
tingo@bite:~$ uname -a Linux bite 5.9.0-0.bpo.5-amd64 #1 SMP Debian 5.9.15-1~bpo10+1 (2020-12-31) x86_64 GNU/Linux
Tingo (diskusjon) 13. feb. 2021 kl. 16:28 (CET)
2020
- 2020-11-11
- eksternt diskkabinett - byttet fra usb til esata tilkobling. Først fjernet jeg diskene fra operativsystemet ved hjelp av
# echo 1 > /sys/block/<disk>/device/delete, eksempel# echo 1 > /sys/block/sdb/device/delete, deretter koblet jeg usb-kabelen fra serveren, og koblet inn esata-kabelen. Diskene dukket opp automagisk på serveren. Tingo (diskusjon) 11. nov. 2020 kl. 11:55 (CET)
- 2020-11-09
- eksternt diskkabinett - installert nye disker 4 x 4TB Seagate IronWolf. De nye diskene vises i lsblk
tingo@bite:~$ sudo lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 465.7G 0 disk └─sda1 8:1 0 465.7G 0 part / sdb 8:16 0 3.7T 0 disk sdc 8:32 0 3.7T 0 disk sdd 8:48 0 3.7T 0 disk sde 8:64 0 3.7T 0 disk sr0 11:0 1 1024M 0 rom
nye disker er sdb, sdc, sdd, sde. Tingo (diskusjon) 9. nov. 2020 kl. 13:37 (CET)
- 2020-10-14
- det eksterne disk-kabinettet er et IcyBox IB-RD3640SU3[3] fra RaidSonic[4]. Tingo (diskusjon) 14. okt. 2020 kl. 10:26 (CEST)
- 2020-06-19
- bite er oppgradert til nyeste Debian stretch (9.12) med litt hjelp fra trygvis. Tingo (diskusjon) 19. jun. 2020 kl. 16:58 (CEST)
tingo@bite:~$ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 9.12 (stretch) Release: 9.12 Codename: stretch tingo@bite:~$ uname -a Linux bite 4.19.0-0.bpo.9-amd64 #1 SMP Debian 4.19.118-2~bpo9+1 (2020-05-20) x86_64 GNU/Linux
og rebootet.
- 2020-06-19
- bite var off (shutdown); det var veldig varmt på rommet, så kanskje det skyldes for høy temperatur. Tiltak for å få ned temperaturen var igangsatt, så jeg trykket på power-knappen og skrudde bite på igjen. Den kom opp, det gjorde også alle vm'ene på den. Tingo (diskusjon) 19. jun. 2020 kl. 12:09 (CEST)
2018
2018-10-12: Disker og div vedlikehold
De siste dagene har Bite fått nytt diskkabinett med 4x 3TB disker og nytt eSATA-kort (USB funket ikke noe særlig).
Ansible-oppsettet har blitt sterkt forbedret for automatisk utrulling av brukere, admins og roller. Tilganger på en del maskiner har blitt ryddet opp.
Marvin har blitt satt opp som disk-VM og Bitrafs Dropbox-konto blir etterhvert tilgjengelig som //marvin/dropbox på verktøymaskinene (CNC og laser). Delingen er tilgjengelig for alle som er på Bitraf, brukernavn og passord er ikke nødvendig.
--Trygvis (diskusjon) 12. okt. 2018 kl. 07:55 (UTC)
2017
2017-10-12
mastensg
la til virtuell maskin p2k16-staging for haavares. tilgjengelig på p2k16-staging.local på bitraf og p2k16-staging.bitraf.no.
2017-09-30
mastensg
- https://community.spiceworks.com/topic/1552298-setting-smart-array-p410i-to-hba-mode-dl380-g6-with-it-mode-firmware
- http://h20564.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_04bffb688a73438598fef81ddd
jeg fant hpssacli og installerte det.
bite ~ $ sudo /opt/hp/hpssacli/bld/hpssacli
HPE Smart Storage Administrator CLI 2.40.13.0
Detecting Controllers...Done.
Type "help" for a list of supported commands.
Type "exit" to close the console.
=> ctrl slot=0 modify hbamode=on
Error: This operation is not supported with the current configuration. Use the
"show" command on devices to show additional details about the
configuration.
Reason: Not supported
=> ctrl slot=0 show
Smart Array P410i in Slot 0 (Embedded)
Bus Interface: PCI
Slot: 0
Serial Number: 5001438017522FA0
Cache Serial Number: PAAVPID1126167V
Controller Status: OK
Hardware Revision: C
Firmware Version: 6.00-2
Rebuild Priority: Medium
Expand Priority: Medium
Surface Scan Delay: 15 secs
Surface Scan Mode: Idle
Parallel Surface Scan Supported: No
Queue Depth: Automatic
Monitor and Performance Delay: 60 min
Elevator Sort: Enabled
Degraded Performance Optimization: Disabled
Inconsistency Repair Policy: Disabled
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: 0 secs
Cache Board Present: True
Cache Status: OK
Cache Ratio: 25% Read / 75% Write
Drive Write Cache: Disabled
Total Cache Size: 512 MB
Total Cache Memory Available: 400 MB
No-Battery Write Cache: Disabled
Cache Backup Power Source: Batteries
Battery/Capacitor Count: 1
Battery/Capacitor Status: OK
SATA NCQ Supported: True
Number of Ports: 2 Internal only
Driver Name: hpsa
Driver Version: 3.4.16
Driver Supports HPE SSD Smart Path: True
PCI Address (Domain:Bus:Device.Function): 0000:05:00.0
Host Serial Number: CZ21450B5J
Sanitize Erase Supported: False
Primary Boot Volume: logicaldrive 1 (600508B1001C7A7F3E2649601E8275E0)
Secondary Boot Volume: None
=>
fra tråden over:
> P410i HBA mode support was only released for Integrity servers.
det virker som et dårlig tegn siden bite er en proliant-server.
jeg gir opp på hba-modus.
virtuelle maskiner.
jeg jobbet mer med heim. jeg lagde kontoer for alle medlemmer.
- https://bitraf.no/wiki/Heim
- http://heim.bitraf.no/
- https://github.com/bitraf/infrastructure/tree/master/heim
2017-09-23
eliasbakken, odinho, mastensg
vi konfigurerte ilo: 10.13.38.102
brukernavn og passord står i https://github.com/bitraf/infrastructure
denne maskinen var: vmwarehost07.sb1a.sparebank1.no
det er klager på ram-brikkene som har blitt satt inn
mastensg tok ut brikkene i sprekk 1, 4 og 7 på prosessor 1. det var disse som hadde fått klager på seg
maskinen har Smart Array P410i, som automatisk lager raid 1
installerte debian 9 på smart arrey-et sitt raid 1
pakker for nettverkskortene (non-free):
- firmware-bnx2
- firmware-bnx2x
- firmware-qlogic
nettverkskonfigurasjon:
- lan: dhcp / enp4s0f0 / nic 3
- wan: 77.40.158.102 / enp4s0f1 / nic 4
- ilo: 10.13.38.102
lagde ansible-konfigurasjon for bite: https://github.com/bitraf/infrastructure/tree/master/bite
satt virtuell maskin heim.bitraf.no i eksperimentell drift
nyttige virt-kommandoer:
bite ~ $ sudo virsh define heim.xml Domain heim defined from heim.xml bite ~ $ sudo virsh list --all Id Name State ---------------------------------------------------- - heim shut off bite ~ $ sudo virsh start heim Domain heim started bite ~ $ sudo virsh destroy heim Domain heim destroyed bite ~ $
se hva som skjer på en virtuell maskin på bite, fra din egen maskin:
~ $ virt-viewer -c qemu+ssh://mastensg@bite.bitraf.no/system heim
Om maskinen
Bite er en Is computer model::HP ProLiant DL380 G7[5] server.
Bilder
IB-RD3640SU3 front panel
Se også
- https://wiki.debian.org/DebianInstaller/Preseed
- HPE - Software Delivery Repository
- Debian - HP ProLiant Servers
