Bite
{{#invoke:Infobox|infobox}}
Innhold
nettverk
br0 har fast adresse på det lokale nettverket, 10.13.37.3. br1 har fast adresse på det eksterne nettverket, 77.40.158.102. bite sin ruter er powertech sin, nemlig 77.40.158.97.
virtuelle maskiner kan bli med i br0, og/eller br1 avhengig av hvilke nettverk de skal være på
Virtuelle maskiner
Bite er stort sett host for en del VMer. Vi bruker både QEMU og LXC for virtualisering.
vm'er på bite
$ sudo virsh list Id Name State ---------------------------------------------------- 1 riemann running 2 ssh.karlsbakk.net running 3 heim running 4 francesco.karlsbakk.net running 5 p2k16-staging running 6 p2k16 running 7 zabbix.karlsbakk.net running 8 iot running 9 unifi running
En av disse er tenkt å kjøre Dockers.
Home assistant docker
Som eksempel er Home Assistant (snart) satt opp som en Docker på en av maskinene.
Hjemmeområde for medlemmer
Heim er en egen virtuell server.
styre virtuelle maskiner
det går an å styre de virtuelle maskinene på bite over nettverket: Remote Management of Guests
LXC
lxc-create \ -B zfs --zfsroot=pool0/lxc \ -t debian \ --name=$NAME -- \ -r stretch
HP Smart Array P410i
- https://communities.vmware.com/thread/484114
- https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/P410i-amp-JBOD/td-p/5210876
- https://amk1.wordpress.com/2013/11/22/zfs-with-hp-smart-array-p410i/
- http://www.thegeekstuff.com/2014/07/hpacucli-examples
- http://h20564.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_04bffb688a73438598fef81ddd
=> controller slot=0 show config detail [...] Firmware Version: 6.00-2 [...] => controller slot=0 modify hbamode=on forced Error: Syntax error at "hbamode" =>
Drives
Logiske drives i maskina.
tingo@bite:~$ sudo hpacucli controller slot=0 logicaldrive all show Smart Array P410i in Slot 0 (Embedded) array A logicaldrive 1 (465.7 GB, RAID 1, OK)
Fysiske disker i maskina.
tingo@bite:~$ sudo hpacucli controller slot=0 physicaldrive all show Smart Array P410i in Slot 0 (Embedded) array A physicaldrive 1I:1:1 (port 1I:box 1:bay 1, Solid State SATA, 500 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, Solid State SATA, 500 GB, OK) unassigned physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 146 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 146 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SAS, 146 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SAS, 146 GB, Predictive Failure) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SAS, 146 GB, OK) physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SAS, 146 GB, OK)
Logg
(Signer loggen ved å legge til --~~~~) på en egen linje på slutten av innlegget eller trykk på signatur-knappen i menyen).
2021
- 2021-02-16
- tonight we switched the two upper disk drives in the exteranl chassis, to figure out if the anomaly is with the drive or the slot in the chassis.
tingo@bite:~$ sudo smartctl -i /dev/sdb smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZGY7LN54 Firmware Version: 0958 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Tue Feb 16 20:18:06 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled tingo@bite:~$ sudo smartctl -i /dev/sdc smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZGY7KZNL LU WWN Device Id: 5 000c50 0c6c55c55 Firmware Version: SC60 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Feb 16 20:19:19 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled tingo@bite:~$ sudo smartctl -i /dev/sdd smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZGY7M1EN LU WWN Device Id: 5 000c50 0c6c8b047 Firmware Version: SC60 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Feb 16 20:19:36 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled tingo@bite:~$ sudo smartctl -i /dev/sde smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZGY7P7JN LU WWN Device Id: 5 000c50 0c6da4787 Firmware Version: SC60 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Feb 16 20:19:59 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled
Unfortunately, the anomaly floows the slot (it is the topmost slot in the external chassis), not the drive. Tingo (diskusjon) 16. feb. 2021 kl. 21:12 (CET)
- 2021-02-12
- we had some trouble with the disk drives in the external chassis, here I document what smartctl reports for the drives.
tingo@bite:~$ sudo smartctl -i /dev/sdb smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZGY7KZNL Firmware Version: 0958 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Fri Feb 12 09:36:26 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled tingo@bite:~$ sudo smartctl -i /dev/sdc smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZGY7LN54 LU WWN Device Id: 5 000c50 0c6c868a0 Firmware Version: SC60 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Feb 12 09:36:33 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled tingo@bite:~$ sudo smartctl -i /dev/sdd smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZGY7M1EN LU WWN Device Id: 5 000c50 0c6c8b047 Firmware Version: SC60 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Feb 12 09:36:51 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled tingo@bite:~$ sudo smartctl -i /dev/sde smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZGY7P7JN LU WWN Device Id: 5 000c50 0c6da4787 Firmware Version: SC60 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Feb 12 09:36:55 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled
Tingo (diskusjon) 16. feb. 2021 kl. 21:06 (CET)
- 2021-02-10
- Bite er oppgradert til Debian 10.8 av Trygvis.
tingo@bite:~$ cat /etc/debian_version 10.8
kernel
tingo@bite:~$ uname -a Linux bite 5.9.0-0.bpo.5-amd64 #1 SMP Debian 5.9.15-1~bpo10+1 (2020-12-31) x86_64 GNU/Linux
Tingo (diskusjon) 13. feb. 2021 kl. 16:28 (CET)
2020
- 2020-11-11
- eksternt diskkabinett - byttet fra usb til esata tilkobling. Først fjernet jeg diskene fra operativsystemet ved hjelp av
# echo 1 > /sys/block/<disk>/device/delete
, eksempel# echo 1 > /sys/block/sdb/device/delete
, deretter koblet jeg usb-kabelen fra serveren, og koblet inn esata-kabelen. Diskene dukket opp automagisk på serveren. Tingo (diskusjon) 11. nov. 2020 kl. 11:55 (CET)
- 2020-11-09
- eksternt diskkabinett - installert nye disker 4 x 4TB Seagate IronWolf. De nye diskene vises i lsblk
tingo@bite:~$ sudo lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 465.7G 0 disk └─sda1 8:1 0 465.7G 0 part / sdb 8:16 0 3.7T 0 disk sdc 8:32 0 3.7T 0 disk sdd 8:48 0 3.7T 0 disk sde 8:64 0 3.7T 0 disk sr0 11:0 1 1024M 0 rom
nye disker er sdb, sdc, sdd, sde. Tingo (diskusjon) 9. nov. 2020 kl. 13:37 (CET)
- 2020-10-14
- det eksterne disk-kabinettet er et IcyBox IB-RD3640SU3[1] fra RaidSonic[2]. Tingo (diskusjon) 14. okt. 2020 kl. 10:26 (CEST)
- 2020-06-19
- bite er oppgradert til nyeste Debian stretch (9.12) med litt hjelp fra trygvis. Tingo (diskusjon) 19. jun. 2020 kl. 16:58 (CEST)
tingo@bite:~$ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 9.12 (stretch) Release: 9.12 Codename: stretch tingo@bite:~$ uname -a Linux bite 4.19.0-0.bpo.9-amd64 #1 SMP Debian 4.19.118-2~bpo9+1 (2020-05-20) x86_64 GNU/Linux
og rebootet.
- 2020-06-19
- bite var off (shutdown); det var veldig varmt på rommet, så kanskje det skyldes for høy temperatur. Tiltak for å få ned temperaturen var igangsatt, så jeg trykket på power-knappen og skrudde bite på igjen. Den kom opp, det gjorde også alle vm'ene på den. Tingo (diskusjon) 19. jun. 2020 kl. 12:09 (CEST)
2018
2018-10-12: Disker og div vedlikehold
De siste dagene har Bite fått nytt diskkabinett med 4x 3TB disker og nytt eSATA-kort (USB funket ikke noe særlig).
Ansible-oppsettet har blitt sterkt forbedret for automatisk utrulling av brukere, admins og roller. Tilganger på en del maskiner har blitt ryddet opp.
Marvin har blitt satt opp som disk-VM og Bitrafs Dropbox-konto blir etterhvert tilgjengelig som //marvin/dropbox
på verktøymaskinene (CNC og laser). Delingen er tilgjengelig for alle som er på Bitraf, brukernavn og passord er ikke nødvendig.
--Trygvis (diskusjon) 12. okt. 2018 kl. 07:55 (UTC)
2017
2017-10-12
mastensg
la til virtuell maskin p2k16-staging for haavares. tilgjengelig på p2k16-staging.local på bitraf og p2k16-staging.bitraf.no.
2017-09-30
mastensg
- https://community.spiceworks.com/topic/1552298-setting-smart-array-p410i-to-hba-mode-dl380-g6-with-it-mode-firmware
- http://h20564.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_04bffb688a73438598fef81ddd
jeg fant hpssacli og installerte det.
bite ~ $ sudo /opt/hp/hpssacli/bld/hpssacli HPE Smart Storage Administrator CLI 2.40.13.0 Detecting Controllers...Done. Type "help" for a list of supported commands. Type "exit" to close the console. => ctrl slot=0 modify hbamode=on Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. Reason: Not supported => ctrl slot=0 show Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: 5001438017522FA0 Cache Serial Number: PAAVPID1126167V Controller Status: OK Hardware Revision: C Firmware Version: 6.00-2 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Parallel Surface Scan Supported: No Queue Depth: Automatic Monitor and Performance Delay: 60 min Elevator Sort: Enabled Degraded Performance Optimization: Disabled Inconsistency Repair Policy: Disabled Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 512 MB Total Cache Memory Available: 400 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Number of Ports: 2 Internal only Driver Name: hpsa Driver Version: 3.4.16 Driver Supports HPE SSD Smart Path: True PCI Address (Domain:Bus:Device.Function): 0000:05:00.0 Host Serial Number: CZ21450B5J Sanitize Erase Supported: False Primary Boot Volume: logicaldrive 1 (600508B1001C7A7F3E2649601E8275E0) Secondary Boot Volume: None =>
fra tråden over:
> P410i HBA mode support was only released for Integrity servers.
det virker som et dårlig tegn siden bite er en proliant-server.
jeg gir opp på hba-modus.
virtuelle maskiner.
jeg jobbet mer med heim. jeg lagde kontoer for alle medlemmer.
- https://bitraf.no/wiki/Heim
- http://heim.bitraf.no/
- https://github.com/bitraf/infrastructure/tree/master/heim
2017-09-23
eliasbakken, odinho, mastensg
vi konfigurerte ilo: 10.13.38.102
brukernavn og passord står i https://github.com/bitraf/infrastructure
denne maskinen var: vmwarehost07.sb1a.sparebank1.no
det er klager på ram-brikkene som har blitt satt inn
mastensg tok ut brikkene i sprekk 1, 4 og 7 på prosessor 1. det var disse som hadde fått klager på seg
maskinen har Smart Array P410i, som automatisk lager raid 1
installerte debian 9 på smart arrey-et sitt raid 1
pakker for nettverkskortene (non-free):
- firmware-bnx2
- firmware-bnx2x
- firmware-qlogic
nettverkskonfigurasjon:
- lan: dhcp / enp4s0f0 / nic 3
- wan: 77.40.158.102 / enp4s0f1 / nic 4
- ilo: 10.13.38.102
lagde ansible-konfigurasjon for bite: https://github.com/bitraf/infrastructure/tree/master/bite
satt virtuell maskin heim.bitraf.no i eksperimentell drift
nyttige virt-kommandoer:
bite ~ $ sudo virsh define heim.xml Domain heim defined from heim.xml bite ~ $ sudo virsh list --all Id Name State ---------------------------------------------------- - heim shut off bite ~ $ sudo virsh start heim Domain heim started bite ~ $ sudo virsh destroy heim Domain heim destroyed bite ~ $
se hva som skjer på en virtuell maskin på bite, fra din egen maskin:
~ $ virt-viewer -c qemu+ssh://mastensg@bite.bitraf.no/system heim
Om maskinen
Bite er en Is computer model::HP ProLiant DL380 G7[3] server.
Bilder
Se også
- https://wiki.debian.org/DebianInstaller/Preseed
- HPE - Software Delivery Repository
- Debian - HP ProLiant Servers