Forskjell mellom versjoner av «Formlabs Form1+»

Fra Bitraf
Hopp til navigering Hopp til søk
(created Formlabs Form1+ page)
 
(lagt inn seksjon Dokumentasjon)
Linje 28: Linje 28:
  
 
Det finnes også "castable resin" - kan brennes ut av gipsformer (til støping), fleksible resin
 
Det finnes også "castable resin" - kan brennes ut av gipsformer (til støping), fleksible resin
 +
 +
== Dokumentasjon ==
 +
først
 +
* [https://support.formlabs.com/s/article/Safety Safety]
 +
* [https://support.formlabs.com/s/article/Resin-Care Resin Care]
 +
* [https://support.formlabs.com/s/article/Get-Ready-to-Receive-Your-Printer Get Ready to Receive Your Form 1+ Printer]
 +
* [https://support.formlabs.com/s/article/Unpacking-your-Printer Unpacking your Form 1+ Printer]
 +
 +
Forberedelse og bruk
 +
* [https://support.formlabs.com/s/article/Set-Up-the-Form-1 Set Up the Form 1+]
 +
* [https://support.formlabs.com/s/article/Filling-the-Resin-Tank Filling the Form 1+ Resin Tank]
 +
* [https://support.formlabs.com/s/article/Refilling-the-Resin-Tank-while-Printing Refilling the Form 1+ Resin Tank while Printing]
 +
* [https://support.formlabs.com/s/article/Checking-the-Resin-Tank Checking the Form 1+ Resin Tank]
 +
 +
Vedlikehold
 +
* [https://support.formlabs.com/s/article/Form-1-Care Form 1+ Care]
 +
* [https://support.formlabs.com/s/article/Resin-Tank-Care Form 1+ Resin Tank Care]
 +
* [https://support.formlabs.com/s/article/Replacing-the-Resin-Tank Replacing the Form 1+ Resin Tank]
 +
* [https://support.formlabs.com/s/article/Checking-the-Form-1-Mirror Checking the Form 1+ Mirror]
 +
* [https://support.formlabs.com/s/article/Cleaning-the-Form-1-Mirror Cleaning the Form 1+ Mirror]
 +
 +
Feilsøking
 +
* [https://support.formlabs.com/s/article/Fine-Tuning-the-Form-1 Fine Tuning the Form 1+]
 +
* [https://support.formlabs.com/s/article/Issues-While-Printing Issues While Printing (Form 1+)]
 +
* [https://support.formlabs.com/s/article/Cleaning-after-a-Failed-Print Cleaning after a Failed Print (Form 1+)]
 +
* [https://support.formlabs.com/s/article/Print-Defects Print Defects (Form 1+)]
 +
* [https://support.formlabs.com/s/article/Hardware-Issues Form 1+ Hardware Issues]
 +
* [https://support.formlabs.com/s/article/Shipping-Your-Form-1 Shipping Your Form 1+]
  
 
== Referanser ==
 
== Referanser ==

Revisjonen fra 9. mai 2019 kl. 10:18

Bitraf har en formlabs[1] Form1+ 3D printer. Dette er en resin-printer[2].

Bruk

Vedlikehold

Om printeren

  • byggevolum: 125 x 125 x 165 mm
  • laghøyde (akse oppløsning): 25, 50 eller 100 mikrometer
  • fysisk størrelse: 30 x 28 x 45 cm
  • vekt: 8 kg
  • strømforsyning: 100 - 240 VAC, 1.5 A, 50/60 Hz, 60W
  • laser: EN 60825-1:2007 sertifisert, Class 1 Laser, 405nm violet laser
  • print-teknologi: stereolitography (SLA)
  • støttemateriale ("support"): automatisk generert, lett å fjerne

Finishing kit inneholder

  • finishing tray
  • scraper
  • Pre and post-rinse tubs
  • rinse basket
  • squeeze bottle
  • flush cutters
  • tweezers
  • disposable nitrile gloves

Standard resin[3] finnes i fargene hvit (white), grå (grey) og sort (black). I tillegg finnes blank (clear) resin.

Det finnes også "castable resin" - kan brennes ut av gipsformer (til støping), fleksible resin

Dokumentasjon

først

Forberedelse og bruk

Vedlikehold

Feilsøking

Referanser