Forskjell mellom versjoner av «Vakuum bord til Shopbot»
Hopp til navigering
Hopp til søk
| Linje 1: | Linje 1: | ||
| + | ==Parts available== | ||
* CNC-plus VT-4070 board (hanging on the wall) - https://cnc-plus.de/en/Workholding/vacuum-clamping-tables/VT-4070-Vacuum-Table--Vacuum-Clamping-Plate-400x700mm-.html | * CNC-plus VT-4070 board (hanging on the wall) - https://cnc-plus.de/en/Workholding/vacuum-clamping-tables/VT-4070-Vacuum-Table--Vacuum-Clamping-Plate-400x700mm-.html | ||
* CNC-plus VT-4070 tubes (in a transparent box under Shopbot) | * CNC-plus VT-4070 tubes (in a transparent box under Shopbot) | ||
* Becker KVT 3.100 Vacuum Pump(under Shopbot) - https://www.becker-international.com/de/en/products/vacuum-pumps/rotary-vane-vacuum-pumps-oil-free/kvt3.100.htm | * Becker KVT 3.100 Vacuum Pump(under Shopbot) - https://www.becker-international.com/de/en/products/vacuum-pumps/rotary-vane-vacuum-pumps-oil-free/kvt3.100.htm | ||
| + | |||
| + | ==Process== | ||
# Mount the VT-4070 board. Use the mounting holes it has. | # Mount the VT-4070 board. Use the mounting holes it has. | ||
Revisjonen fra 27. aug. 2026 kl. 13:54
Parts available
- CNC-plus VT-4070 board (hanging on the wall) - https://cnc-plus.de/en/Workholding/vacuum-clamping-tables/VT-4070-Vacuum-Table--Vacuum-Clamping-Plate-400x700mm-.html
- CNC-plus VT-4070 tubes (in a transparent box under Shopbot)
- Becker KVT 3.100 Vacuum Pump(under Shopbot) - https://www.becker-international.com/de/en/products/vacuum-pumps/rotary-vane-vacuum-pumps-oil-free/kvt3.100.htm
Process
- Mount the VT-4070 board. Use the mounting holes it has.
- Connect the tubes to the vacuum pump
- Connect the 3-phase power cable of the vacuum pump (long cable)
- Place your material. Make sure are not used is covered.
- Start the vacuum pump. Test good suction is in place. It is your responsibility to make sure enough suction is available.
- Start milling.
