Forskjell mellom versjoner av «HEDMA»
Hopp til navigering
Hopp til søk
(→Bruk) |
(add usage description) |
||
| Linje 16: | Linje 16: | ||
EDMWeb<ref>https://github.com/Rack-Robotics/EDMWeb</ref> is the CAM software used. | EDMWeb<ref>https://github.com/Rack-Robotics/EDMWeb</ref> is the CAM software used. | ||
| − | == Bruk == | + | == Sikkerhet / safety == |
| − | The powercore guys made a nice video: Powercore V1 Quickstart Guide<ref>https://www.youtube.com/watch?v=FpUhpkBXa6Q</ref> | + | |
| + | * do not touch when running | ||
| + | * stop cutting if a short occurs | ||
| + | * run only with dielectric fluid in the bath | ||
| + | |||
| + | == Bruk / usage == | ||
| + | The powercore guys made a nice video: Powercore V1 Quickstart Guide<ref>https://www.youtube.com/watch?v=FpUhpkBXa6Q</ref>. | ||
| + | |||
| + | You need to have a dielectric fluid in the bath, de-ionized water is good. The workpiece is connected to the anode (positive side) and the tool to the cathode (negative side). | ||
| + | |||
== Referanser == | == Referanser == | ||
Revisjonen fra 20. mar. 2024 kl. 19:11
HEDMA is a hackable homemade EDM[1] machine.
Documentation is in the FabricateEDM[2] repository.
Innhold
Maskin / Machine
The machine is homemade, using existing machines and parts.
Motion platform
The motion platform is a Ultimaker 1[3] 3D printer.
Power supply
We are using the Powercore V1. Manual[4], hardware[5], firmware[6].
Programware / software
EDMWeb[7] is the CAM software used.
Sikkerhet / safety
- do not touch when running
- stop cutting if a short occurs
- run only with dielectric fluid in the bath
Bruk / usage
The powercore guys made a nice video: Powercore V1 Quickstart Guide[8].
You need to have a dielectric fluid in the bath, de-ionized water is good. The workpiece is connected to the anode (positive side) and the tool to the cathode (negative side).
Referanser
- ↑ EDM
- ↑ https://github.com/Fabricatable-Machines/FabricateEDM FabricateEDM
- ↑ https://reprap.org/wiki/Ultimaker Ultimaker
- ↑ https://github.com/Rack-Robotics/Powercore-V1.0-Manual
- ↑ https://github.com/Rack-Robotics/Powercore-V1.0-Hardware
- ↑ https://github.com/Rack-Robotics/Powercore-V1.0-Firmware
- ↑ https://github.com/Rack-Robotics/EDMWeb
- ↑ https://www.youtube.com/watch?v=FpUhpkBXa6Q
