Forskjell mellom versjoner av «Cisco 2504 Wireless Controller»
Hopp til navigering
Hopp til søk
(add link to 8.1 release notes) |
(Add software info and features not supported on 2504 wlc) |
||
| Linje 10: | Linje 10: | ||
Software version: 8.1.131.0<ref>[https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn81mr3.html Release Notes - Cisco Wireless Release 8.1.131.0]</ref> | Software version: 8.1.131.0<ref>[https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn81mr3.html Release Notes - Cisco Wireless Release 8.1.131.0]</ref> | ||
| + | |||
| + | == Software == | ||
| + | Software version is 8.1.131.0, which is release 8.1. | ||
| + | |||
| + | === Features not supported on 2504 wlc === | ||
| + | * Autoinstall | ||
| + | * Cisco WLC integration with Lync SDN API | ||
| + | * Bonjour Gateway | ||
| + | * Application Visibility and Control (AVC) for FlexConnect local switched access points | ||
| + | Note: However, AVC for local mode APs is supported. | ||
| + | * Bandwidth Contract | ||
| + | * Service Port | ||
| + | * AppleTalk Bridging | ||
| + | * Right-to-Use Licensing | ||
| + | * PMIPv6 | ||
| + | * AP Stateful Switchover (SSO) and client SSO | ||
| + | * Multicast-to-Unicast | ||
== Tips == | == Tips == | ||
Revisjonen fra 26. okt. 2021 kl. 15:18
Bitraf has a Cisco 2504 Wireless Controller[1].
Specifications
- Product ID:
- Product Version: 8.1.131.0
- Bootloader Version: 1.0.20
- Field Recovery Image Version: 7.6.101.1
- Firmware Version: PIC 16.0
- supports 25 access points with installed licenses
Software version: 8.1.131.0[2]
Software
Software version is 8.1.131.0, which is release 8.1.
Features not supported on 2504 wlc
- Autoinstall
- Cisco WLC integration with Lync SDN API
- Bonjour Gateway
- Application Visibility and Control (AVC) for FlexConnect local switched access points
Note: However, AVC for local mode APs is supported.
- Bandwidth Contract
- Service Port
- AppleTalk Bridging
- Right-to-Use Licensing
- PMIPv6
- AP Stateful Switchover (SSO) and client SSO
- Multicast-to-Unicast
Tips
if ssh access fails with message "no matching key exchange method found", use ssh -o KexAlgorithms=<algorythm> ... instead.
