Forskjell mellom versjoner av «Prosjekt Velkomstskjerm»
m |
(→2024: mada a holder and hung up the infoskjerm pi a bit better) |
||
(82 mellomliggende revisjoner av 5 brukere er ikke vist) | |||
Linje 1: | Linje 1: | ||
[[Fil:Skjerm.jpg|miniatyr|bilde av skjerm]] | [[Fil:Skjerm.jpg|miniatyr|bilde av skjerm]] | ||
− | Skjermen i hjørnet skal vise en velkomstmelding med kul grafikk når folk logger in med checkin. | + | Skjermen i hjørnet skal vise en velkomstmelding med kul grafikk når folk logger in med checkin. |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | [[Category:Prosjekter]] | + | [[Fil:Infoskjerm-grafana.jpg|miniatyr]] |
+ | |||
+ | Infoskjermen er nå operativ. Den kjører en webside som viser en playlist fra lokal grafana-server. | ||
+ | For å redigere grafana-sidene logger du inn på http://iot2.bitraf.no:3000 | ||
+ | |||
+ | |||
+ | == Teknisk info == | ||
+ | Løsningen består av to deler, En Raspberry Pi koblet til TV'en som viser en webside, og en server som står for alt det andre. | ||
+ | === Raspberry Pi === | ||
+ | navn: infoskjerm.local | ||
+ | |||
+ | '''Update''': the image is a "normal" RaspiOS lite image, and then the ansible playbook infoscreen.yml is used to configure it. | ||
+ | |||
+ | This Pi runs Raspbian, autologins as the '''pi''' user (no, not with the default password) and starts the chromium browser pointing to the server. It (ab)uses LXDE's autostart script for this, like so | ||
+ | <pre> | ||
+ | pi@infoskjerm:~ $ more /home/pi/.config/lxsession/LXDE-pi/autostart | ||
+ | @lxpanel --profile LXDE-pi | ||
+ | @pcmanfm --desktop --profile LXDE-pi | ||
+ | #@xscreensaver -no-splash | ||
+ | @point-rpi | ||
+ | |||
+ | @chromium-browser --no-startup-window --kiosk | ||
+ | |||
+ | @/usr/bin/chromium-browser --start-maximized --kiosk --disable-infobars --noerrordialogs --app=http://iot2.bitraf.no:3000/playlists/play/1?kiosk | ||
+ | |||
+ | |||
+ | @unclutter | ||
+ | @xset s off | ||
+ | @xset s noblank | ||
+ | @xset -dpms | ||
+ | </pre> | ||
+ | xscreensaver is commented out, the command <code>unclutter</code> turns off the mouse, then <code>xset</code> turns off screen saver, blanking and DPMS just in case the screen supports that. Not sure why there is two lines to start chromium-browser. | ||
+ | ; point-rpi : Locate the mouse pointer over the menu button | ||
+ | |||
+ | === Server === | ||
+ | navn: iot2.bitraf.no | ||
+ | |||
+ | Serveren kjører Grafana<ref>https://grafana.com/grafana Grafana</ref> (grafana-server), samt følgende komponenter fra TICK stack | ||
+ | * Telegraf<ref>https://www.influxdata.com/time-series-platform/telegraf/ Telegraf</ref> - agent, datainnsamling | ||
+ | * Influxdb<ref>https://www.influxdata.com/time-series-platform/influxdb/ Influxdb</ref> - database for tids-serie data | ||
+ | * Kapacitor<ref>https://www.influxdata.com/time-series-platform/kapacitor/ Kapacitor</ref> - prosessering av data | ||
+ | |||
+ | Tjenestene har følgende navn | ||
+ | * grafana-server.service | ||
+ | * influxdb.service | ||
+ | * kapacitor.service | ||
+ | * telegraf.service | ||
+ | |||
+ | Chronograf<ref>https://www.influxdata.com/time-series-platform/chronograf/ Chronograf</ref> er ikke i bruk, siden vi benytter Grafana. | ||
+ | |||
+ | ==== Databaser ==== | ||
+ | Følgende databaser er definert i influxdb | ||
+ | <pre> | ||
+ | > show databases | ||
+ | name: databases | ||
+ | name | ||
+ | ---- | ||
+ | _internal | ||
+ | telegraf | ||
+ | mqtt_bitraf | ||
+ | bitraf-maskiner | ||
+ | </pre> | ||
+ | I mqtt_bitraf er følgende serier definert | ||
+ | <pre> | ||
+ | > show series on mqtt_bitraf | ||
+ | key | ||
+ | --- | ||
+ | bitraf_bool,host=iot2,topic=/bitraf/door/2floor/isopen | ||
+ | bitraf_bool,host=iot2,topic=/bitraf/door/3office/isopen | ||
+ | bitraf_bool,host=iot2,topic=/bitraf/door/3workshop/isopen | ||
+ | bitraf_bool,host=iot2,topic=/bitraf/door/4floor/isopen | ||
+ | bitraf_bool,host=iot2,topic=/bitraf/door/frontdoor/isopen | ||
+ | bitraf_int,host=iot2,topic=/bitraf/door/frontdoor/open | ||
+ | bitraf_int,host=iot2,topic=/public/chime/uptime | ||
+ | bitraf_string,host=iot2,topic=public/infoscreen/wtf | ||
+ | mqtt_consumer,host=iot2,topic=/public/smutcave/humidity | ||
+ | mqtt_consumer,host=iot2,topic=/public/smutcave/temperature | ||
+ | mqtt_consumer,host=iot2,topic=bitraf/currentsensor/shopbot | ||
+ | mqtt_consumer,host=iot2,topic=bitraf/humidity/1 | ||
+ | mqtt_consumer,host=iot2,topic=bitraf/humidity/2/value | ||
+ | mqtt_consumer,host=iot2,topic=bitraf/temperature/1 | ||
+ | mqtt_consumer,host=iot2,topic=bitraf/temperature/2/value | ||
+ | mqtt_consumer,host=iot2,topic=bitraf/temperature/3/value | ||
+ | ping,host=iot2,url=10.13.37.248 | ||
+ | ping,host=iot2,url=10.13.37.47 | ||
+ | ping,host=iot2,url=boxy3.local | ||
+ | ping,host=iot2,url=boxy4.local | ||
+ | ping,host=iot2,url=http://boxy3.local | ||
+ | ping,host=iot2,url=http://boxy4.local | ||
+ | </pre> | ||
+ | I bitraf-maskiner er følgende serier definert | ||
+ | <pre> | ||
+ | > show series on "bitraf-maskiner" | ||
+ | key | ||
+ | --- | ||
+ | nvidia_smi,compute_mode=Default,host=Multimedia-maskin,index=0,name=GeForce\ GTX\ 570,pstate=P0,uuid=GPU-5566aa51-b932-0d56-cc06-b6ae94dc6e5f | ||
+ | nvidia_smi,compute_mode=Default,host=Multimedia-maskin,index=0,name=GeForce\ GTX\ 570,pstate=P12,uuid=GPU-5566aa51-b932-0d56-cc06-b6ae94dc6e5f | ||
+ | nvidia_smi,compute_mode=Default,host=Multimedia-maskin,index=0,name=GeForce\ GTX\ 570,pstate=P8,uuid=GPU-5566aa51-b932-0d56-cc06-b6ae94dc6e5f | ||
+ | win_cpu,host=Multimedia-maskin,instance=0,objectname=Processor | ||
+ | win_cpu,host=Multimedia-maskin,instance=1,objectname=Processor | ||
+ | win_cpu,host=Multimedia-maskin,instance=2,objectname=Processor | ||
+ | win_cpu,host=Multimedia-maskin,instance=3,objectname=Processor | ||
+ | win_cpu,host=Multimedia-maskin,instance=4,objectname=Processor | ||
+ | win_cpu,host=Multimedia-maskin,instance=5,objectname=Processor | ||
+ | win_cpu,host=Multimedia-maskin,instance=_Total,objectname=Processor | ||
+ | win_disk,host=Multimedia-maskin,instance=C:,objectname=LogicalDisk | ||
+ | win_disk,host=Multimedia-maskin,instance=D:,objectname=LogicalDisk | ||
+ | win_disk,host=Multimedia-maskin,instance=E:,objectname=LogicalDisk | ||
+ | win_diskio,host=Multimedia-maskin,instance=0\ C:,objectname=PhysicalDisk | ||
+ | win_diskio,host=Multimedia-maskin,instance=1\ D:,objectname=PhysicalDisk | ||
+ | win_diskio,host=Multimedia-maskin,instance=2\ E:,objectname=PhysicalDisk | ||
+ | win_mem,host=Multimedia-maskin,objectname=Memory | ||
+ | win_net,host=Multimedia-maskin,instance=Realtek\ PCIe\ GBE\ Family\ Controller,objectname=Network\ Interface | ||
+ | win_perf_counters,host=Multimedia-maskin,instance=Realtek\ PCIe\ GBE\ Family\ Controller,objectname=Network\ Interface | ||
+ | win_swap,host=Multimedia-maskin,instance=_Total,objectname=Paging\ File | ||
+ | win_system,host=Multimedia-maskin,objectname=System | ||
+ | </pre> | ||
+ | ==== Telegraf ==== | ||
+ | Telegraf er konfigurert (via /etc/telegraf/telegraf.conf) til å lese følgende topics fra Bitraf's mqtt server: | ||
+ | |||
+ | format: value, type: float | ||
+ | <pre> | ||
+ | topics = [ | ||
+ | "bitraf/temperature/1", | ||
+ | "bitraf/humidity/1", | ||
+ | "bitraf/temperature/2/value", | ||
+ | "bitraf/humidity/2/value", | ||
+ | "bitraf/temperature/3/value", | ||
+ | "bitraf/currentsensor/shopbot", | ||
+ | "/public/smutcave/temperature", | ||
+ | "/public/smutcave/humidity", | ||
+ | "public/printerroom/tvoc", | ||
+ | "public/printerroom/eco2", | ||
+ | "public/printerroom/humidity", | ||
+ | "public/printerroom/temperature", | ||
+ | "public/lab/pm10", | ||
+ | "public/lab/pm25", | ||
+ | "public/laser/eco2", | ||
+ | "public/laser/humidity", | ||
+ | "public/laser/pm10", | ||
+ | "public/laser/pm25", | ||
+ | "public/laser/temperature", | ||
+ | "public/laser/tvoc", | ||
+ | ] | ||
+ | </pre> | ||
+ | |||
+ | format: value, type: integer | ||
+ | <pre> | ||
+ | "/bitraf/door/frontdoor/open", | ||
+ | "/public/chime/uptime", | ||
+ | </pre> | ||
+ | |||
+ | format: value, type: boolean | ||
+ | <pre> | ||
+ | "/bitraf/door/frontdoor/isopen", | ||
+ | "/bitraf/door/2floor/isopen", | ||
+ | "/bitraf/door/3workshop/isopen", | ||
+ | "/bitraf/door/3office/isopen", | ||
+ | "/bitraf/door/4floor/isopen", | ||
+ | </pre> | ||
+ | |||
+ | format: json | ||
+ | <pre> | ||
+ | "bitraf/octoprint/blackbot/progress/printing", | ||
+ | </pre> | ||
+ | |||
+ | format: value, type: string | ||
+ | <pre> | ||
+ | "public/infoscreen/wtf", | ||
+ | </pre> | ||
+ | |||
+ | den må oppdateres hvis flere ting skal inn. Ser ikke ut som om Telegraf støtter bruk av wildcards i mqtt topics. | ||
+ | |||
+ | == Vedlikehold == | ||
+ | |||
+ | === 2024 === | ||
+ | ; 2024-10-17 : also 3D printed a holder (of sorts) for the infoskjerm pi, so it doesn't hang by the cables anymore. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 17. okt. 2024 kl. 19:53 (CEST) | ||
+ | : the <code>infoskjerm.local</code> Pi had fallen down (literally) so that neither the HDMI / DVI cable nor the power cable was connected. Connected everything, and the pi booted right up and shows the grafana URL again. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 17. okt. 2024 kl. 18:23 (CEST) | ||
+ | |||
+ | === 2023 === | ||
+ | ; 2023-03-25 : no data in grafana, so I restarted telegraf via <code>sudo systemctl restart telegraf</code>. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 25. mar. 2023 kl. 18:51 (CET) | ||
+ | |||
+ | ; 2023-03-12 : set up a new microSD card for the infoskjerm.local pi, based on RaspiOS Lite, using the Raspberry Pi Imager to configure hostname, ssh access and user. Then I used ansible like so <code>ansible-playbook infoscreen.yml -l infoskjerm --user pi -k</code> (the --user and -k are only needed the first time, after that you can use <code>ansible-playbook infoscreen.yml -l infoskjerm</code>). [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 12. mar. 2023 kl. 15:57 (CET) | ||
+ | ; 2023-03-12 : no data in grafana, so I restarted telegraf via <code>sudo systemctl restart telegraf</code>. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 12. mar. 2023 kl. 15:39 (CET) | ||
+ | |||
+ | ; 2023-02-23 : restarted the sensor in the 3D printer-room andf now I get data into grafana. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 23. feb. 2023 kl. 22:37 (CET) | ||
+ | |||
+ | ; 2023-02-23 : checked data on mqtt-server, it has and "spits out" data. But there is no data in Influxdb | ||
+ | <pre> | ||
+ | tingo@iot2:~$ influx | ||
+ | Connected to http://localhost:8086 version 1.5.3 | ||
+ | InfluxDB shell version: 1.5.3 | ||
+ | > use mqtt_bitraf ; | ||
+ | Using database mqtt_bitraf | ||
+ | > select * from mqtt_consumer where topic="/public/smutcave/humidity" | ||
+ | > select * from mqtt_consumer where topic="/public/smutcave/temperature" | ||
+ | > select * from mqtt_consumer where topic=bitraf/currentsensor/shopbot | ||
+ | > select * from mqtt_consumer where topic=bitraf/humidity/1 | ||
+ | > select * from mqtt_consumer where topic=bitraf/humidity/2/value | ||
+ | > select * from mqtt_consumer where topic=bitraf/temperature/1 | ||
+ | > select * from mqtt_consumer where topic=bitraf/temperature/2/value | ||
+ | > select * from mqtt_consumer where topic=bitraf/temperature/3/value | ||
+ | </pre> | ||
+ | |||
+ | ; 2023-02-23 : restarted telegraf via <code>sudo systemctl restart telegraf</code>. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 23. feb. 2023 kl. 20:14 (CET) | ||
+ | |||
+ | === 2022 === | ||
+ | ; 2022-11-27 : configured up a new microSD card for the infoskjerm.local pi, based on RaspiOS Lite, using the Raspberry Pi Imager to configure hostname, ssh access and user. Then I used ansible like so | ||
+ | <code>ansible-playbook infoscreen.yml -l infoskjerm --user pi -k</code> (the --user and -k are only needed the first time, after that you can use <code>ansible-playbook infoscreen.yml -l infoskjerm</code>). | ||
+ | If mdns is giving you trouble, just localy edit the inventory file, and set the ip address instead of the hostname. '''Note''': to be able to use (Bitraf's) ansible setup, you need to be a superuser in Bitraf's ansible setup. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. nov. 2022 kl. 19:00 (CET) | ||
+ | |||
+ | ; 2022-11-27 : no data in grafana, so I restarted telegraf via <code>sudo systemctl restart telegraf</code>. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. nov. 2022 kl. 16:36 (CET) | ||
+ | |||
+ | ; 2022-10-13 : meldt om at SD-kortet på pi'en (infoskjerme.local) har dødd / er blitt utslitt. Meldt av [[User:royk|royk]]. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. nov. 2022 kl. 16:32 (CET) | ||
+ | |||
+ | ; 2022-02-14 : grafana - downgrade plugin grafana-clock-panel to version 0.1.0, because the new vwersion fails. | ||
+ | <pre> | ||
+ | tingo@iot2:~$ sudo grafana-cli plugins install grafana-clock-panel 0.1.0 | ||
+ | installing grafana-clock-panel @ 0.1.0 | ||
+ | from url: https://grafana.com/api/plugins/grafana-clock-panel/versions/0.1.0/download | ||
+ | into: /var/lib/grafana/plugins | ||
+ | |||
+ | Failed downloading. Will retry once. | ||
+ | Failed downloading. Will retry once. | ||
+ | |||
+ | Error: ✗ Corrupt http response from source. Please try again. | ||
+ | |||
+ | |||
+ | NAME: | ||
+ | Grafana cli plugins install - install <plugin id> <plugin version (optional)> | ||
+ | |||
+ | USAGE: | ||
+ | Grafana cli plugins install [arguments...] | ||
+ | tingo@iot2:~$ sudo grafana-cli plugins install grafana-clock-panel 0.1.0 | ||
+ | installing grafana-clock-panel @ 0.1.0 | ||
+ | from url: https://grafana.com/api/plugins/grafana-clock-panel/versions/0.1.0/download | ||
+ | into: /var/lib/grafana/plugins | ||
+ | |||
+ | Failed downloading. Will retry once. | ||
+ | ✔ Installed grafana-clock-panel successfully | ||
+ | |||
+ | Restart grafana after installing plugins . <service grafana-server restart> | ||
+ | </pre> | ||
+ | and restart grafana via <code>$ sudo systemctl restart grafana-server</code>. That's all. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 14. feb. 2022 kl. 19:53 (CET) | ||
+ | |||
+ | ; 2022-02-13 : grafana - install a json plugin | ||
+ | <pre> | ||
+ | tingo@iot2:~$ sudo grafana-cli plugins install grafana-simple-json-datasource | ||
+ | installing grafana-simple-json-datasource @ 1.4.2 | ||
+ | from url: https://grafana.com/api/plugins/grafana-simple-json-datasource/versions/1.4.2/download | ||
+ | into: /var/lib/grafana/plugins | ||
+ | |||
+ | ✔ Installed grafana-simple-json-datasource successfully | ||
+ | |||
+ | Restart grafana after installing plugins . <service grafana-server restart> | ||
+ | </pre> | ||
+ | and restart grafana via <code>$ sudo systemctl restart grafana-server</code>. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 13. feb. 2022 kl. 15:34 (CET) | ||
+ | ; 2022-02-13 : restarted grafana after updating plugins via <code>$ sudo systemctl restart grafana-server</code>. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 13. feb. 2022 kl. 14:51 (CET) | ||
+ | ; 2022-02-13 : update a few grafana plugins | ||
+ | <pre> | ||
+ | tingo@iot2:~$ sudo grafana-cli plugins update grafana-clock-panel | ||
+ | Removing plugin: grafana-clock-panel | ||
+ | installing grafana-clock-panel @ 1.1.2 | ||
+ | from url: https://grafana.com/api/plugins/grafana-clock-panel/versions/1.1.2/download | ||
+ | into: /var/lib/grafana/plugins | ||
+ | |||
+ | ✔ Installed grafana-clock-panel successfully | ||
+ | |||
+ | Restart grafana after installing plugins . <service grafana-server restart> | ||
+ | |||
+ | tingo@iot2:~$ sudo grafana-cli plugins update grafana-piechart-panel | ||
+ | Removing plugin: grafana-piechart-panel | ||
+ | installing grafana-piechart-panel @ 1.6.2 | ||
+ | from url: https://grafana.com/api/plugins/grafana-piechart-panel/versions/1.6.2/download | ||
+ | into: /var/lib/grafana/plugins | ||
+ | |||
+ | ✔ Installed grafana-piechart-panel successfully | ||
+ | |||
+ | Restart grafana after installing plugins . <service grafana-server restart> | ||
+ | |||
+ | tingo@iot2:~$ sudo grafana-cli plugins update mtanda-google-calendar-datasource | ||
+ | Removing plugin: mtanda-google-calendar-datasource | ||
+ | installing mtanda-google-calendar-datasource @ 1.0.5 | ||
+ | from url: https://grafana.com/api/plugins/mtanda-google-calendar-datasource/versions/1.0.5/download | ||
+ | into: /var/lib/grafana/plugins | ||
+ | |||
+ | ✔ Installed mtanda-google-calendar-datasource successfully | ||
+ | |||
+ | Restart grafana after installing plugins . <service grafana-server restart> | ||
+ | </pre> [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 13. feb. 2022 kl. 14:48 (CET) | ||
+ | one plugin is stubborn | ||
+ | <pre> | ||
+ | tingo@iot2:~$ sudo grafana-cli plugins update jdbranham-diagram-panel | ||
+ | Removing plugin: jdbranham-diagram-panel | ||
+ | installing jdbranham-diagram-panel @ 1.6.2 | ||
+ | from url: https://grafana.com/api/plugins/jdbranham-diagram-panel/versions/1.6.2/download | ||
+ | into: /var/lib/grafana/plugins | ||
+ | |||
+ | Failed downloading. Will retry once. | ||
+ | Failed downloading. Will retry once. | ||
+ | |||
+ | Error: ✗ Corrupt http response from source. Please try again. | ||
+ | |||
+ | |||
+ | NAME: | ||
+ | Grafana cli plugins update - update <plugin id> | ||
+ | |||
+ | USAGE: | ||
+ | Grafana cli plugins update [arguments...] | ||
+ | |||
+ | tingo@iot2:~$ sudo grafana-cli plugins update jdbranham-diagram-panel | ||
+ | |||
+ | Error: ✗ Could not find dist/plugin.json or plugin.json on jdbranham-diagram-panel in /var/lib/grafana/plugins | ||
+ | |||
+ | NAME: | ||
+ | Grafana cli plugins update - update <plugin id> | ||
+ | |||
+ | USAGE: | ||
+ | Grafana cli plugins update [arguments...] | ||
+ | |||
+ | tingo@iot2:~$ sudo grafana-cli plugins install jdbranham-diagram-panel | ||
+ | installing jdbranham-diagram-panel @ 1.6.2 | ||
+ | from url: https://grafana.com/api/plugins/jdbranham-diagram-panel/versions/1.6.2/download | ||
+ | into: /var/lib/grafana/plugins | ||
+ | |||
+ | Failed downloading. Will retry once. | ||
+ | Failed downloading. Will retry once. | ||
+ | ✔ Installed jdbranham-diagram-panel successfully | ||
+ | |||
+ | Restart grafana after installing plugins . <service grafana-server restart> | ||
+ | |||
+ | </pre> | ||
+ | Finally. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 13. feb. 2022 kl. 14:48 (CET) | ||
+ | ; 2022-02-13 : checking what grafana plugins are installed first | ||
+ | <pre> | ||
+ | tingo@iot2:~$ sudo grafana-cli plugins ls | ||
+ | installed plugins: | ||
+ | briangann-gauge-panel @ 0.0.6 | ||
+ | grafana-clock-panel @ 0.1.0 | ||
+ | grafana-piechart-panel @ 1.3.3 | ||
+ | jdbranham-diagram-panel @ 1.4.4 | ||
+ | mtanda-google-calendar-datasource @ 1.0.4 | ||
+ | |||
+ | Restart grafana after installing plugins . <service grafana-server restart> | ||
+ | </pre> [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 13. feb. 2022 kl. 14:30 (CET) | ||
+ | : checking available plugins | ||
+ | <pre> | ||
+ | tingo@iot2:~$ sudo grafana-cli plugins list-remote | ||
+ | id: abhisant-druid-datasource version: 0.0.6 | ||
+ | id: aceiot-svg-panel version: 0.0.8 | ||
+ | id: ae3e-plotly-panel version: 0.2.1 | ||
+ | id: agenty-flowcharting-panel version: 0.9.1 | ||
+ | id: aidanmountford-html-panel version: 0.0.2 | ||
+ | id: akumuli-datasource version: 1.3.12 | ||
+ | id: alexanderzobnin-zabbix-app version: 4.0.1 | ||
+ | id: alexandra-trackmap-panel version: 1.2.6 | ||
+ | id: andig-darksky-datasource version: 1.0.2 | ||
+ | id: aquaqanalytics-kdbadaptor-datasource version: 1.0.2 | ||
+ | id: ayoungprogrammer-finance-datasource version: 1.0.1 | ||
+ | id: belugacdn-app version: 1.2.1 | ||
+ | id: bessler-pictureit-panel version: 1.0.1 | ||
+ | id: blackmirror1-singlestat-math-panel version: 1.1.8 | ||
+ | id: blackmirror1-statusbygroup-panel version: 1.1.2 | ||
+ | id: bosun-app version: 0.0.29 | ||
+ | id: briangann-datatable-panel version: 1.0.2 | ||
+ | id: briangann-gauge-panel version: 0.0.6 | ||
+ | id: camptocamp-prometheus-alertmanager-datasource version: 0.0.8 | ||
+ | id: citilogics-geoloop-panel version: 1.1.2 | ||
+ | id: clarity89-finnhub-datasource version: 0.1.0 | ||
+ | id: cloudflare-app version: 0.2.2 | ||
+ | id: cloudspout-button-panel version: 7.0.4 | ||
+ | id: cognitedata-datasource version: 2.1.0 | ||
+ | id: corpglory-progresslist-panel version: 1.0.6 | ||
+ | id: dalmatinerdb-datasource version: 1.0.5 | ||
+ | id: dalvany-image-panel version: 2.2.0 | ||
+ | id: ddurieux-glpi-app version: 1.3.1 | ||
+ | id: devicehive-devicehive-datasource version: 2.0.2 | ||
+ | id: devopsprodigy-kubegraf-app version: 1.4.2 | ||
+ | id: digiapulssi-breadcrumb-panel version: 1.1.7 | ||
+ | id: digiapulssi-organisations-panel version: 1.3.1 | ||
+ | id: digrich-bubblechart-panel version: 1.2.0 | ||
+ | id: dlopes7-appdynamics-datasource version: 1.4.3 | ||
+ | id: doitintl-bigquery-datasource version: 1.0.8 | ||
+ | id: factry-untimely-panel version: 0.1.1 | ||
+ | id: farski-blendstat-panel version: 1.0.3 | ||
+ | id: fastweb-openfalcon-datasource version: 1.0.1 | ||
+ | id: fatcloud-windrose-panel version: 0.7.1 | ||
+ | id: fetzerch-sunandmoon-datasource version: 0.1.6 | ||
+ | id: fifemon-graphql-datasource version: 1.1.3 | ||
+ | id: flant-statusmap-panel version: 0.3.4 | ||
+ | id: foursquare-clouderamanager-datasource version: 0.9.3 | ||
+ | id: fzakaria-simple-annotations-datasource version: 1.0.1 | ||
+ | id: gnocchixyz-gnocchi-datasource version: 1.7.1 | ||
+ | id: goshposh-metaqueries-datasource version: 0.0.5 | ||
+ | id: gowee-traceroutemap-panel version: 0.2.3 | ||
+ | id: grafana-azure-data-explorer-datasource version: 2.0.5 | ||
+ | id: grafana-azure-monitor-datasource version: 0.3.1 | ||
+ | id: grafana-clock-panel version: 1.1.2 | ||
+ | id: grafana-datadog-datasource version: 1.4.8 | ||
+ | id: grafana-discourse-datasource version: 1.0.0 | ||
+ | id: grafana-dynatrace-datasource version: 2.0.2 | ||
+ | id: grafana-enterprise-logs-app version: 2.3.0 | ||
+ | id: grafana-enterprise-traces-app version: 1.0.0 | ||
+ | id: grafana-googlesheets-datasource version: 1.0.1 | ||
+ | id: grafana-iot-sitewise-datasource version: 0.0.1 | ||
+ | id: grafana-kairosdb-datasource version: 3.0.2 | ||
+ | id: grafana-metrics-enterprise-app version: 3.3.0 | ||
+ | id: grafana-newrelic-datasource version: 1.4.0 | ||
+ | id: grafana-oracle-datasource version: 1.1.6 | ||
+ | id: grafana-piechart-panel version: 1.6.2 | ||
+ | id: grafana-polystat-panel version: 1.2.2 | ||
+ | id: grafana-servicenow-datasource version: 1.1.1 | ||
+ | id: grafana-simple-json-datasource version: 1.4.2 | ||
+ | id: grafana-splunk-datasource version: 1.4.1 | ||
+ | id: grafana-strava-datasource version: 1.3.0 | ||
+ | id: grafana-synthetic-monitoring-app version: 0.8.13 | ||
+ | id: grafana-worldmap-panel version: 0.3.3 | ||
+ | id: gretamosa-topology-panel version: 1.0.1 | ||
+ | id: gridprotectionalliance-openhistorian-datasource version: 1.0.3 | ||
+ | id: gridprotectionalliance-osisoftpi-datasource version: 1.1.1 | ||
+ | id: hadesarchitect-cassandra-datasource version: 1.1.4 | ||
+ | id: hawkular-datasource version: 1.1.2 | ||
+ | id: humio-datasource version: 3.1.1 | ||
+ | id: ibm-apm-datasource version: 0.9.1 | ||
+ | id: innius-video-panel version: 1.0.1 | ||
+ | id: instana-datasource version: 3.1.0 | ||
+ | id: jasonlashua-prtg-datasource version: 4.0.4 | ||
+ | id: jdbranham-diagram-panel version: 1.6.2 | ||
+ | id: jeanbaptistewatenberg-percent-panel version: 1.0.6 | ||
+ | id: larona-epict-panel version: 1.2.2 | ||
+ | id: linksmart-hds-datasource version: 1.0.2 | ||
+ | id: linksmart-sensorthings-datasource version: 1.3.1 | ||
+ | id: macropower-analytics-panel version: 1.1.2 | ||
+ | id: magnesium-wordcloud-panel version: 1.1.3 | ||
+ | id: marcuscalidus-svg-panel version: 0.3.4 | ||
+ | id: marcusolsson-dynamictext-panel version: 1.0.1 | ||
+ | id: marcusolsson-hourly-heatmap-panel version: 0.6.0 | ||
+ | id: marcusolsson-json-datasource version: 0.4.0 | ||
+ | id: marcusolsson-static-datasource version: 1.0.1 | ||
+ | id: marcusolsson-treemap-panel version: 0.3.0 | ||
+ | id: michaeldmoore-annunciator-panel version: 1.0.5 | ||
+ | id: michaeldmoore-multistat-panel version: 1.4.1 | ||
+ | id: monasca-datasource version: 1.0.1 | ||
+ | id: monitoringartist-monitoringart-datasource version: 1.0.1 | ||
+ | id: moogsoft-aiops-app version: 8.0.1 | ||
+ | id: mtanda-google-calendar-datasource version: 1.0.5 | ||
+ | id: mtanda-heatmap-epoch-panel version: 0.1.8 | ||
+ | id: mtanda-histogram-panel version: 0.1.7 | ||
+ | id: mxswat-separator-panel version: 1.0.1 | ||
+ | id: natel-discrete-panel version: 0.1.0 | ||
+ | id: natel-influx-admin-panel version: 0.0.6 | ||
+ | id: natel-plotly-panel version: 0.0.7 | ||
+ | id: natel-usgs-datasource version: 0.0.3 | ||
+ | id: neocat-cal-heatmap-panel version: 0.0.4 | ||
+ | id: novalabs-annotations-panel version: 0.0.2 | ||
+ | id: novatec-sdg-panel version: 2.3.1 | ||
+ | id: ntop-ntopng-datasource version: 1.0.1 | ||
+ | id: oci-logs-datasource version: 1.1.0 | ||
+ | id: oci-metrics-datasource version: 3.0.0 | ||
+ | id: opennms-helm-app version: 5.0.2 | ||
+ | id: ovh-warp10-datasource version: 2.2.1 | ||
+ | id: paytm-kapacitor-datasource version: 0.1.3 | ||
+ | id: percona-percona-app version: 1.0.1 | ||
+ | id: petrslavotinek-carpetplot-panel version: 0.1.2 | ||
+ | id: pierosavi-imageit-panel version: 0.1.3 | ||
+ | id: pr0ps-trackmap-panel version: 2.1.0 | ||
+ | id: praj-ams-datasource version: 1.2.1 | ||
+ | id: pue-solr-datasource version: 1.0.3 | ||
+ | id: quasardb-datasource version: 3.8.3 | ||
+ | id: rackerlabs-blueflood-datasource version: 0.0.3 | ||
+ | id: radensolutions-netxms-datasource version: 1.2.3 | ||
+ | id: ryantxu-ajax-panel version: 0.0.7-dev | ||
+ | id: ryantxu-annolist-panel version: 0.0.2 | ||
+ | id: satellogic-3d-globe-panel version: 0.1.1 | ||
+ | id: savantly-heatmap-panel version: 0.2.1 | ||
+ | id: sbueringer-consul-datasource version: 0.1.5 | ||
+ | id: scadavis-synoptic-panel version: 1.0.5 | ||
+ | id: sidewinder-datasource version: 0.2.1 | ||
+ | id: simpod-json-datasource version: 0.2.0 | ||
+ | id: skydive-datasource version: 1.2.1 | ||
+ | id: smartmakers-trafficlight-panel version: 1.0.1 | ||
+ | id: sni-pnp-datasource version: 1.0.8 | ||
+ | id: sni-thruk-datasource version: 1.0.6 | ||
+ | id: snuids-radar-panel version: 1.4.5 | ||
+ | id: snuids-trafficlights-panel version: 1.4.6 | ||
+ | id: speakyourcode-button-panel version: 0.2.1 | ||
+ | id: spotify-heroic-datasource version: 0.0.2 | ||
+ | id: stagemonitor-elasticsearch-app version: 0.83.3 | ||
+ | id: udoprog-heroic-datasource version: 0.1.1 | ||
+ | id: vertamedia-clickhouse-datasource version: 2.4.2 | ||
+ | id: vertica-grafana-datasource version: 0.1.1 | ||
+ | id: vonage-status-panel version: 1.0.11 | ||
+ | id: voxter-app version: 0.0.2 | ||
+ | id: williamvenner-timepickerbuttons-panel version: 2.0.1 | ||
+ | id: xginn8-pagerduty-datasource version: 0.2.2 | ||
+ | id: yesoreyeram-boomtable-panel version: 1.4.1 | ||
+ | id: yesoreyeram-boomtheme-panel version: 0.1.1 | ||
+ | id: yeya24-chaosmesh-datasource version: 0.1.2 | ||
+ | id: zuburqan-parity-report-panel version: 1.2.2 | ||
+ | |||
+ | Restart grafana after installing plugins . <service grafana-server restart> | ||
+ | </pre> [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 13. feb. 2022 kl. 14:35 (CET) | ||
+ | |||
+ | ; 2022-02-11 | ||
+ | : | ||
+ | * Created a new "TV - simplified" dashboard in Grafana and set it as the primary item in the playlist. [[Bruker:taz|taz]] (-) 11. feb. 2022 kl. 22:00 (CET) | ||
+ | * Added <code>--app</code> flag for <code>chromium-browser</code> in LXDE's autostart script to prevent "Chrome didn't shut down correctly" popup. [[Bruker:taz|taz]] (-) 11. feb. 2022 kl. 20:20 (CET) | ||
+ | ; 2022-01-20 : I added legends to the temperature and humidity graphs in Grafana, so it is easier to see what data the graphs show. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 20. jan. 2022 kl. 21:18 (CET) | ||
+ | |||
+ | === 2021 === | ||
+ | ; 2021-06-30 : no data in temperature and humidity graphs in grafana, so I restated the telegraf service via <code>tingo@iot2:~$ sudo systemctl restart telegraf</code>. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 30. jun. 2021 kl. 14:15 (CEST) | ||
+ | |||
+ | ; 2021-06-17 : temperature and humidity graphs were empty in grafana, restarting the telegraf service via <code>tingo@iot2:~$ sudo systemctl restart telegraf</code>. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 17. jun. 2021 kl. 16:19 (CEST) | ||
+ | |||
+ | ; 2021-05-04 : rebooted infoskjerm.local, as it was having trouble displaying the grafana page in Chromium. Hopefully the reboot helps. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 4. mai 2021 kl. 13:13 (CEST) | ||
+ | |||
+ | ; 2021-02-06 : front door data was not showing in grafana, so I restarted the telegraf service via <code>tingo@iot2:~$ sudo systemctl restart telegraf</code> as usual. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 6. feb. 2021 kl. 21:36 (CET) | ||
+ | |||
+ | === 2020 === | ||
+ | ; 2020-12-30 : no data showing in Grafana, restarted the telegraf service as usual, via <code>tingo@iot2:~$ sudo systemctl restart telegraf</code>. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 30. des. 2020 kl. 17:15 (CET) | ||
+ | |||
+ | ; 2020-10-27 : front door data was not showing in grafana, so I restarted the telegraf service via <code>tingo@iot2:~$ sudo systemctl restart telegraf</code> as usual. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. okt. 2020 kl. 15:56 (CET) | ||
+ | |||
+ | ; 2020-08-10 : some temperature sensors (Outside, 2nd floor, 4th floor) did not show in grafana, so I restarted the telegraf service (<code>tingo@iot2:~$ sudo systemctl restart telegraf</code>). Didn't seem to help, perhaps the sensors need to be fixed? [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 10. aug. 2020 kl. 14:31 (CEST) | ||
+ | |||
+ | ; 2020-06-19 : the browser wouldn't reconnect to the server (iot2) after it came back online, so I restarted the pi ('shutdown -r now') that fixed it. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 19. jun. 2020 kl. 12:55 (CEST) | ||
+ | |||
+ | ; 2020-06-18 : environment sensors data was not showing in grafana, so I restarted the telegraf service via <code>tingo@iot2:~$ sudo systemctl restart telegraf</code> as usual. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 19. jun. 2020 kl. 00:24 (CEST) | ||
+ | |||
+ | ; 2020-06-03 : environment sensors data was not showing in grafana, so I restarted the telegraf service via <code>tingo@iot2:~$ sudo systemctl restart telegraf</code> as usual. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 3. jun. 2020 kl. 13:11 (CEST) | ||
+ | |||
+ | ; 2020-04-25: front door data was not showing in grafana, so I restarted the telegraf service via <code>tingo@iot2:~$ sudo systemctl restart telegraf</code> as usual. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 25. apr. 2020 kl. 16:49 (CEST) | ||
+ | |||
+ | ; 2020-02-20: environment sensors data was not showing in grafana again. Restarted the telegraf service via <code>tingo@iot2:~$ sudo systemctl restart telegraf</code>. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 20. feb. 2020 kl. 19:16 (CET) | ||
+ | |||
+ | ; 2020-02-06: added more sensors to <code>/etc/telegraf/telegraf.conf</code>: | ||
+ | <pre> | ||
+ | "public/laser/eco2", | ||
+ | "public/laser/humidity", | ||
+ | "public/laser/pm10", | ||
+ | "public/laser/pm25", | ||
+ | "public/laser/temperature", | ||
+ | "public/laser/tvoc", | ||
+ | </pre> | ||
+ | and reloaded telegraf with <code>sudo systemctl reload telegraf</code>. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 6. feb. 2020 kl. 09:46 (CET) | ||
+ | |||
+ | ; 2020-01-30 : added more sensors to <code>/etc/telegraf/telegraf.conf</code>: | ||
+ | <pre> | ||
+ | "public/printerroom/tvoc", | ||
+ | "public/printerroom/eco2", | ||
+ | "public/printerroom/humidity", | ||
+ | "public/printerroom/temperature", | ||
+ | "public/lab/pm10", | ||
+ | "public/lab/pm25", | ||
+ | </pre> | ||
+ | and reloaded telegraf with <code>sudo systemctl reload telegraf</code>. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 30. jan. 2020 kl. 20:14 (CET) | ||
+ | |||
+ | === 2019 === | ||
+ | ; 2019-11-11 : front door activity was showing "no data points". restarted telegraf service via <code>tingo@iot2:~$ sudo systemctl restart telegraf</code>, it is ok now. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 14. nov. 2019 kl. 11:27 (CET) | ||
+ | |||
+ | ; 2019-09-05 : front door activity was showing "no data points". restarted telegraf service via <code>tingo@iot2:~$ sudo systemctl restart telegraf</code>, hopefully it will work. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 5. sep. 2019 kl. 17:58 (CEST) | ||
+ | |||
+ | ; 2019-08-27: environment sensors data was not showing in grafana again. Restarted the telegraf service. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. aug. 2019 kl. 11:39 (CEST) | ||
+ | |||
+ | ; 2019-07-30 : the graphs didn't update on the Pi (update in Grafana was ok). Rebooted the Pi. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 30. jul. 2019 kl. 09:54 (CEST) | ||
+ | |||
+ | ; 2019-07-26 : the graphs didn't update on the Pi (update in Grafana was ok). Rebooted the Pi. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 26. jul. 2019 kl. 12:36 (CEST) | ||
+ | |||
+ | ; 2019-07-03 : the graphs didn't update on the Pi (update in Grafana was ok). Rebooted the Pi. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 3. jul. 2019 kl. 16:29 (CEST) | ||
+ | |||
+ | ; 2019-07-01 : environment sensors data was not showing in grafana again. Restarted the telegraf service. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 3. jul. 2019 kl. 16:27 (CEST) | ||
+ | |||
+ | ; 2019-06-21 : front door activity was showing "no data points". restarted telegraf service via <code>tingo@iot2:~$ sudo systemctl restart telegraf</code>, but that didn't have any effect. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) | ||
+ | : Ok, with patience the data shows up. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 21. jun. 2019 kl. 13:21 (CEST) | ||
+ | ; 2019-05-09 : environment sensors data was not showing in grafana again. I had to restart the telegraf service via | ||
+ | :<code>tingo@iot2:~$ sudo systemctl restart telegraf</code> | ||
+ | : in addition, I had to refresh the browser window on the Pi (connected a keyboard and did Ctrl-R). [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 9. mai 2019 kl. 19:48 (CEST) | ||
+ | |||
+ | ; 2019-04-12 : environment sensors data was not showing in grafana again. As usual, a | ||
+ | :<code>tingo@iot2:~$ sudo systemctl restart telegraf</code> | ||
+ | :fixed the problem. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 12. apr. 2019 kl. 15:52 (CEST) | ||
+ | |||
+ | ; 2019-01-29 : I also needed to restart the playlist on the welcome screen. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 29. jan. 2019 kl. 14:39 (CET) | ||
+ | : environment sensors data was not showing in grafana again. The telegraf service reported | ||
+ | <code><pre> | ||
+ | tingo@iot2:~$ systemctl status telegraf | ||
+ | ● telegraf.service - The plugin-driven server agent for reporting metrics into InfluxDB | ||
+ | Loaded: loaded (/lib/systemd/system/telegraf.service; enabled; vendor preset: enabled) | ||
+ | Active: active (running) since Fri 2018-10-12 00:22:04 CEST; 3 months 18 days ago | ||
+ | Docs: https://github.com/influxdata/telegraf | ||
+ | Main PID: 448 (telegraf) | ||
+ | Tasks: 18 (limit: 4915) | ||
+ | CGroup: /system.slice/telegraf.service | ||
+ | └─448 /usr/bin/telegraf -config /etc/telegraf/telegraf.conf -config-directory /etc/te | ||
+ | |||
+ | Jan 29 12:44:30 iot2 telegraf[448]: 2019-01-29T11:44:30Z E! Error in plugin [inputs.mqtt_consume | ||
+ | Jan 29 12:44:30 iot2 telegraf[448]: error: pingresp not received, disconnecting | ||
+ | Jan 29 12:44:30 iot2 telegraf[448]: MQTT Client will try to reconnect | ||
+ | Jan 29 12:44:30 iot2 telegraf[448]: 2019-01-29T11:44:30Z I! MQTT Client Connected | ||
+ | Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailabl | ||
+ | </pre></code> | ||
+ | so I restarted the service via | ||
+ | <code><pre> | ||
+ | tingo@iot2:~$ sudo systemctl restart telegraf | ||
+ | </pre></code> | ||
+ | it looks better now | ||
+ | <code><pre> | ||
+ | tingo@iot2:~$ systemctl status telegraf | ||
+ | ● telegraf.service - The plugin-driven server agent for reporting metrics into InfluxDB | ||
+ | Loaded: loaded (/lib/systemd/system/telegraf.service; enabled; vendor preset: enabled) | ||
+ | Active: active (running) since Tue 2019-01-29 14:26:32 CET; 8s ago | ||
+ | Docs: https://github.com/influxdata/telegraf | ||
+ | Main PID: 29968 (telegraf) | ||
+ | Tasks: 14 (limit: 4915) | ||
+ | CGroup: /system.slice/telegraf.service | ||
+ | ├─29968 /usr/bin/telegraf -config /etc/telegraf/telegraf.conf -config-directory /etc/ | ||
+ | └─29981 /bin/ping -c 1 -n -s 16 -i 1 -W 1 -w 10 10.13.37.47 | ||
+ | |||
+ | Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! Loaded aggregators: | ||
+ | Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! Loaded processors: | ||
+ | Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! Loaded outputs: influxdb | ||
+ | Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! Tags enabled: host=iot2 | ||
+ | Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! Agent Config: Interval:10s, Quiet: | ||
+ | Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! MQTT Client Connected | ||
+ | Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! MQTT Client Connected | ||
+ | Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! MQTT Client Connected | ||
+ | Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! MQTT Client Connected | ||
+ | Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! MQTT Client Connected | ||
+ | </pre></code> | ||
+ | Maybe telegraf needs to be restarted every time the mqtt server is restarted? [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 29. jan. 2019 kl. 14:32 (CET) | ||
+ | |||
+ | === 2018 === | ||
+ | |||
+ | ; 2018-10-12 : grafana-server.service was not enabled on the server, so it didn't start automatically when the server got restarted. Fixed. --[[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 12. okt. 2018 kl. 09:16 (UTC) | ||
+ | ; 2018-09-18 : measurement <code>mqtt_consumer</code> i <code>mqtt_bitraf</code> hadde data som ikke var oppdatert, selv om alle de andre i samme database var oppdatert. "Løst" ved å restarte telegraf vha. <code>sudo systemctl restart telegraf</code>. --[[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 18. sep. 2018 kl. 14:32 (UTC) | ||
+ | |||
+ | == Referanser == | ||
+ | <references/> | ||
+ | |||
+ | [[Category:Prosjekter]][[Category:Elektronikk]] |
Nåværende revisjon fra 17. okt. 2024 kl. 18:54
Skjermen i hjørnet skal vise en velkomstmelding med kul grafikk når folk logger in med checkin.
Infoskjermen er nå operativ. Den kjører en webside som viser en playlist fra lokal grafana-server. For å redigere grafana-sidene logger du inn på http://iot2.bitraf.no:3000
Innhold
Teknisk info
Løsningen består av to deler, En Raspberry Pi koblet til TV'en som viser en webside, og en server som står for alt det andre.
Raspberry Pi
navn: infoskjerm.local
Update: the image is a "normal" RaspiOS lite image, and then the ansible playbook infoscreen.yml is used to configure it.
This Pi runs Raspbian, autologins as the pi user (no, not with the default password) and starts the chromium browser pointing to the server. It (ab)uses LXDE's autostart script for this, like so
pi@infoskjerm:~ $ more /home/pi/.config/lxsession/LXDE-pi/autostart @lxpanel --profile LXDE-pi @pcmanfm --desktop --profile LXDE-pi #@xscreensaver -no-splash @point-rpi @chromium-browser --no-startup-window --kiosk @/usr/bin/chromium-browser --start-maximized --kiosk --disable-infobars --noerrordialogs --app=http://iot2.bitraf.no:3000/playlists/play/1?kiosk @unclutter @xset s off @xset s noblank @xset -dpms
xscreensaver is commented out, the command unclutter
turns off the mouse, then xset
turns off screen saver, blanking and DPMS just in case the screen supports that. Not sure why there is two lines to start chromium-browser.
- point-rpi
- Locate the mouse pointer over the menu button
Server
navn: iot2.bitraf.no
Serveren kjører Grafana[1] (grafana-server), samt følgende komponenter fra TICK stack
- Telegraf[2] - agent, datainnsamling
- Influxdb[3] - database for tids-serie data
- Kapacitor[4] - prosessering av data
Tjenestene har følgende navn
- grafana-server.service
- influxdb.service
- kapacitor.service
- telegraf.service
Chronograf[5] er ikke i bruk, siden vi benytter Grafana.
Databaser
Følgende databaser er definert i influxdb
> show databases name: databases name ---- _internal telegraf mqtt_bitraf bitraf-maskiner
I mqtt_bitraf er følgende serier definert
> show series on mqtt_bitraf key --- bitraf_bool,host=iot2,topic=/bitraf/door/2floor/isopen bitraf_bool,host=iot2,topic=/bitraf/door/3office/isopen bitraf_bool,host=iot2,topic=/bitraf/door/3workshop/isopen bitraf_bool,host=iot2,topic=/bitraf/door/4floor/isopen bitraf_bool,host=iot2,topic=/bitraf/door/frontdoor/isopen bitraf_int,host=iot2,topic=/bitraf/door/frontdoor/open bitraf_int,host=iot2,topic=/public/chime/uptime bitraf_string,host=iot2,topic=public/infoscreen/wtf mqtt_consumer,host=iot2,topic=/public/smutcave/humidity mqtt_consumer,host=iot2,topic=/public/smutcave/temperature mqtt_consumer,host=iot2,topic=bitraf/currentsensor/shopbot mqtt_consumer,host=iot2,topic=bitraf/humidity/1 mqtt_consumer,host=iot2,topic=bitraf/humidity/2/value mqtt_consumer,host=iot2,topic=bitraf/temperature/1 mqtt_consumer,host=iot2,topic=bitraf/temperature/2/value mqtt_consumer,host=iot2,topic=bitraf/temperature/3/value ping,host=iot2,url=10.13.37.248 ping,host=iot2,url=10.13.37.47 ping,host=iot2,url=boxy3.local ping,host=iot2,url=boxy4.local ping,host=iot2,url=http://boxy3.local ping,host=iot2,url=http://boxy4.local
I bitraf-maskiner er følgende serier definert
> show series on "bitraf-maskiner" key --- nvidia_smi,compute_mode=Default,host=Multimedia-maskin,index=0,name=GeForce\ GTX\ 570,pstate=P0,uuid=GPU-5566aa51-b932-0d56-cc06-b6ae94dc6e5f nvidia_smi,compute_mode=Default,host=Multimedia-maskin,index=0,name=GeForce\ GTX\ 570,pstate=P12,uuid=GPU-5566aa51-b932-0d56-cc06-b6ae94dc6e5f nvidia_smi,compute_mode=Default,host=Multimedia-maskin,index=0,name=GeForce\ GTX\ 570,pstate=P8,uuid=GPU-5566aa51-b932-0d56-cc06-b6ae94dc6e5f win_cpu,host=Multimedia-maskin,instance=0,objectname=Processor win_cpu,host=Multimedia-maskin,instance=1,objectname=Processor win_cpu,host=Multimedia-maskin,instance=2,objectname=Processor win_cpu,host=Multimedia-maskin,instance=3,objectname=Processor win_cpu,host=Multimedia-maskin,instance=4,objectname=Processor win_cpu,host=Multimedia-maskin,instance=5,objectname=Processor win_cpu,host=Multimedia-maskin,instance=_Total,objectname=Processor win_disk,host=Multimedia-maskin,instance=C:,objectname=LogicalDisk win_disk,host=Multimedia-maskin,instance=D:,objectname=LogicalDisk win_disk,host=Multimedia-maskin,instance=E:,objectname=LogicalDisk win_diskio,host=Multimedia-maskin,instance=0\ C:,objectname=PhysicalDisk win_diskio,host=Multimedia-maskin,instance=1\ D:,objectname=PhysicalDisk win_diskio,host=Multimedia-maskin,instance=2\ E:,objectname=PhysicalDisk win_mem,host=Multimedia-maskin,objectname=Memory win_net,host=Multimedia-maskin,instance=Realtek\ PCIe\ GBE\ Family\ Controller,objectname=Network\ Interface win_perf_counters,host=Multimedia-maskin,instance=Realtek\ PCIe\ GBE\ Family\ Controller,objectname=Network\ Interface win_swap,host=Multimedia-maskin,instance=_Total,objectname=Paging\ File win_system,host=Multimedia-maskin,objectname=System
Telegraf
Telegraf er konfigurert (via /etc/telegraf/telegraf.conf) til å lese følgende topics fra Bitraf's mqtt server:
format: value, type: float
topics = [ "bitraf/temperature/1", "bitraf/humidity/1", "bitraf/temperature/2/value", "bitraf/humidity/2/value", "bitraf/temperature/3/value", "bitraf/currentsensor/shopbot", "/public/smutcave/temperature", "/public/smutcave/humidity", "public/printerroom/tvoc", "public/printerroom/eco2", "public/printerroom/humidity", "public/printerroom/temperature", "public/lab/pm10", "public/lab/pm25", "public/laser/eco2", "public/laser/humidity", "public/laser/pm10", "public/laser/pm25", "public/laser/temperature", "public/laser/tvoc", ]
format: value, type: integer
"/bitraf/door/frontdoor/open", "/public/chime/uptime",
format: value, type: boolean
"/bitraf/door/frontdoor/isopen", "/bitraf/door/2floor/isopen", "/bitraf/door/3workshop/isopen", "/bitraf/door/3office/isopen", "/bitraf/door/4floor/isopen",
format: json
"bitraf/octoprint/blackbot/progress/printing",
format: value, type: string
"public/infoscreen/wtf",
den må oppdateres hvis flere ting skal inn. Ser ikke ut som om Telegraf støtter bruk av wildcards i mqtt topics.
Vedlikehold
2024
- 2024-10-17
- also 3D printed a holder (of sorts) for the infoskjerm pi, so it doesn't hang by the cables anymore. Tingo (diskusjon) 17. okt. 2024 kl. 19:53 (CEST)
- the
infoskjerm.local
Pi had fallen down (literally) so that neither the HDMI / DVI cable nor the power cable was connected. Connected everything, and the pi booted right up and shows the grafana URL again. Tingo (diskusjon) 17. okt. 2024 kl. 18:23 (CEST)
2023
- 2023-03-25
- no data in grafana, so I restarted telegraf via
sudo systemctl restart telegraf
. Tingo (diskusjon) 25. mar. 2023 kl. 18:51 (CET)
- 2023-03-12
- set up a new microSD card for the infoskjerm.local pi, based on RaspiOS Lite, using the Raspberry Pi Imager to configure hostname, ssh access and user. Then I used ansible like so
ansible-playbook infoscreen.yml -l infoskjerm --user pi -k
(the --user and -k are only needed the first time, after that you can useansible-playbook infoscreen.yml -l infoskjerm
). Tingo (diskusjon) 12. mar. 2023 kl. 15:57 (CET) - 2023-03-12
- no data in grafana, so I restarted telegraf via
sudo systemctl restart telegraf
. Tingo (diskusjon) 12. mar. 2023 kl. 15:39 (CET)
- 2023-02-23
- restarted the sensor in the 3D printer-room andf now I get data into grafana. Tingo (diskusjon) 23. feb. 2023 kl. 22:37 (CET)
- 2023-02-23
- checked data on mqtt-server, it has and "spits out" data. But there is no data in Influxdb
tingo@iot2:~$ influx Connected to http://localhost:8086 version 1.5.3 InfluxDB shell version: 1.5.3 > use mqtt_bitraf ; Using database mqtt_bitraf > select * from mqtt_consumer where topic="/public/smutcave/humidity" > select * from mqtt_consumer where topic="/public/smutcave/temperature" > select * from mqtt_consumer where topic=bitraf/currentsensor/shopbot > select * from mqtt_consumer where topic=bitraf/humidity/1 > select * from mqtt_consumer where topic=bitraf/humidity/2/value > select * from mqtt_consumer where topic=bitraf/temperature/1 > select * from mqtt_consumer where topic=bitraf/temperature/2/value > select * from mqtt_consumer where topic=bitraf/temperature/3/value
- 2023-02-23
- restarted telegraf via
sudo systemctl restart telegraf
. Tingo (diskusjon) 23. feb. 2023 kl. 20:14 (CET)
2022
- 2022-11-27
- configured up a new microSD card for the infoskjerm.local pi, based on RaspiOS Lite, using the Raspberry Pi Imager to configure hostname, ssh access and user. Then I used ansible like so
ansible-playbook infoscreen.yml -l infoskjerm --user pi -k
(the --user and -k are only needed the first time, after that you can use ansible-playbook infoscreen.yml -l infoskjerm
).
If mdns is giving you trouble, just localy edit the inventory file, and set the ip address instead of the hostname. Note: to be able to use (Bitraf's) ansible setup, you need to be a superuser in Bitraf's ansible setup. Tingo (diskusjon) 27. nov. 2022 kl. 19:00 (CET)
- 2022-11-27
- no data in grafana, so I restarted telegraf via
sudo systemctl restart telegraf
. Tingo (diskusjon) 27. nov. 2022 kl. 16:36 (CET)
- 2022-10-13
- meldt om at SD-kortet på pi'en (infoskjerme.local) har dødd / er blitt utslitt. Meldt av royk. Tingo (diskusjon) 27. nov. 2022 kl. 16:32 (CET)
- 2022-02-14
- grafana - downgrade plugin grafana-clock-panel to version 0.1.0, because the new vwersion fails.
tingo@iot2:~$ sudo grafana-cli plugins install grafana-clock-panel 0.1.0 installing grafana-clock-panel @ 0.1.0 from url: https://grafana.com/api/plugins/grafana-clock-panel/versions/0.1.0/download into: /var/lib/grafana/plugins Failed downloading. Will retry once. Failed downloading. Will retry once. Error: ✗ Corrupt http response from source. Please try again. NAME: Grafana cli plugins install - install <plugin id> <plugin version (optional)> USAGE: Grafana cli plugins install [arguments...] tingo@iot2:~$ sudo grafana-cli plugins install grafana-clock-panel 0.1.0 installing grafana-clock-panel @ 0.1.0 from url: https://grafana.com/api/plugins/grafana-clock-panel/versions/0.1.0/download into: /var/lib/grafana/plugins Failed downloading. Will retry once. ✔ Installed grafana-clock-panel successfully Restart grafana after installing plugins . <service grafana-server restart>
and restart grafana via $ sudo systemctl restart grafana-server
. That's all. Tingo (diskusjon) 14. feb. 2022 kl. 19:53 (CET)
- 2022-02-13
- grafana - install a json plugin
tingo@iot2:~$ sudo grafana-cli plugins install grafana-simple-json-datasource installing grafana-simple-json-datasource @ 1.4.2 from url: https://grafana.com/api/plugins/grafana-simple-json-datasource/versions/1.4.2/download into: /var/lib/grafana/plugins ✔ Installed grafana-simple-json-datasource successfully Restart grafana after installing plugins . <service grafana-server restart>
and restart grafana via $ sudo systemctl restart grafana-server
. Tingo (diskusjon) 13. feb. 2022 kl. 15:34 (CET)
- 2022-02-13
- restarted grafana after updating plugins via
$ sudo systemctl restart grafana-server
. Tingo (diskusjon) 13. feb. 2022 kl. 14:51 (CET) - 2022-02-13
- update a few grafana plugins
tingo@iot2:~$ sudo grafana-cli plugins update grafana-clock-panel Removing plugin: grafana-clock-panel installing grafana-clock-panel @ 1.1.2 from url: https://grafana.com/api/plugins/grafana-clock-panel/versions/1.1.2/download into: /var/lib/grafana/plugins ✔ Installed grafana-clock-panel successfully Restart grafana after installing plugins . <service grafana-server restart> tingo@iot2:~$ sudo grafana-cli plugins update grafana-piechart-panel Removing plugin: grafana-piechart-panel installing grafana-piechart-panel @ 1.6.2 from url: https://grafana.com/api/plugins/grafana-piechart-panel/versions/1.6.2/download into: /var/lib/grafana/plugins ✔ Installed grafana-piechart-panel successfully Restart grafana after installing plugins . <service grafana-server restart> tingo@iot2:~$ sudo grafana-cli plugins update mtanda-google-calendar-datasource Removing plugin: mtanda-google-calendar-datasource installing mtanda-google-calendar-datasource @ 1.0.5 from url: https://grafana.com/api/plugins/mtanda-google-calendar-datasource/versions/1.0.5/download into: /var/lib/grafana/plugins ✔ Installed mtanda-google-calendar-datasource successfully Restart grafana after installing plugins . <service grafana-server restart>
Tingo (diskusjon) 13. feb. 2022 kl. 14:48 (CET)
one plugin is stubborn
tingo@iot2:~$ sudo grafana-cli plugins update jdbranham-diagram-panel Removing plugin: jdbranham-diagram-panel installing jdbranham-diagram-panel @ 1.6.2 from url: https://grafana.com/api/plugins/jdbranham-diagram-panel/versions/1.6.2/download into: /var/lib/grafana/plugins Failed downloading. Will retry once. Failed downloading. Will retry once. Error: ✗ Corrupt http response from source. Please try again. NAME: Grafana cli plugins update - update <plugin id> USAGE: Grafana cli plugins update [arguments...] tingo@iot2:~$ sudo grafana-cli plugins update jdbranham-diagram-panel Error: ✗ Could not find dist/plugin.json or plugin.json on jdbranham-diagram-panel in /var/lib/grafana/plugins NAME: Grafana cli plugins update - update <plugin id> USAGE: Grafana cli plugins update [arguments...] tingo@iot2:~$ sudo grafana-cli plugins install jdbranham-diagram-panel installing jdbranham-diagram-panel @ 1.6.2 from url: https://grafana.com/api/plugins/jdbranham-diagram-panel/versions/1.6.2/download into: /var/lib/grafana/plugins Failed downloading. Will retry once. Failed downloading. Will retry once. ✔ Installed jdbranham-diagram-panel successfully Restart grafana after installing plugins . <service grafana-server restart>
Finally. Tingo (diskusjon) 13. feb. 2022 kl. 14:48 (CET)
- 2022-02-13
- checking what grafana plugins are installed first
tingo@iot2:~$ sudo grafana-cli plugins ls installed plugins: briangann-gauge-panel @ 0.0.6 grafana-clock-panel @ 0.1.0 grafana-piechart-panel @ 1.3.3 jdbranham-diagram-panel @ 1.4.4 mtanda-google-calendar-datasource @ 1.0.4 Restart grafana after installing plugins . <service grafana-server restart>
Tingo (diskusjon) 13. feb. 2022 kl. 14:30 (CET)
- checking available plugins
tingo@iot2:~$ sudo grafana-cli plugins list-remote id: abhisant-druid-datasource version: 0.0.6 id: aceiot-svg-panel version: 0.0.8 id: ae3e-plotly-panel version: 0.2.1 id: agenty-flowcharting-panel version: 0.9.1 id: aidanmountford-html-panel version: 0.0.2 id: akumuli-datasource version: 1.3.12 id: alexanderzobnin-zabbix-app version: 4.0.1 id: alexandra-trackmap-panel version: 1.2.6 id: andig-darksky-datasource version: 1.0.2 id: aquaqanalytics-kdbadaptor-datasource version: 1.0.2 id: ayoungprogrammer-finance-datasource version: 1.0.1 id: belugacdn-app version: 1.2.1 id: bessler-pictureit-panel version: 1.0.1 id: blackmirror1-singlestat-math-panel version: 1.1.8 id: blackmirror1-statusbygroup-panel version: 1.1.2 id: bosun-app version: 0.0.29 id: briangann-datatable-panel version: 1.0.2 id: briangann-gauge-panel version: 0.0.6 id: camptocamp-prometheus-alertmanager-datasource version: 0.0.8 id: citilogics-geoloop-panel version: 1.1.2 id: clarity89-finnhub-datasource version: 0.1.0 id: cloudflare-app version: 0.2.2 id: cloudspout-button-panel version: 7.0.4 id: cognitedata-datasource version: 2.1.0 id: corpglory-progresslist-panel version: 1.0.6 id: dalmatinerdb-datasource version: 1.0.5 id: dalvany-image-panel version: 2.2.0 id: ddurieux-glpi-app version: 1.3.1 id: devicehive-devicehive-datasource version: 2.0.2 id: devopsprodigy-kubegraf-app version: 1.4.2 id: digiapulssi-breadcrumb-panel version: 1.1.7 id: digiapulssi-organisations-panel version: 1.3.1 id: digrich-bubblechart-panel version: 1.2.0 id: dlopes7-appdynamics-datasource version: 1.4.3 id: doitintl-bigquery-datasource version: 1.0.8 id: factry-untimely-panel version: 0.1.1 id: farski-blendstat-panel version: 1.0.3 id: fastweb-openfalcon-datasource version: 1.0.1 id: fatcloud-windrose-panel version: 0.7.1 id: fetzerch-sunandmoon-datasource version: 0.1.6 id: fifemon-graphql-datasource version: 1.1.3 id: flant-statusmap-panel version: 0.3.4 id: foursquare-clouderamanager-datasource version: 0.9.3 id: fzakaria-simple-annotations-datasource version: 1.0.1 id: gnocchixyz-gnocchi-datasource version: 1.7.1 id: goshposh-metaqueries-datasource version: 0.0.5 id: gowee-traceroutemap-panel version: 0.2.3 id: grafana-azure-data-explorer-datasource version: 2.0.5 id: grafana-azure-monitor-datasource version: 0.3.1 id: grafana-clock-panel version: 1.1.2 id: grafana-datadog-datasource version: 1.4.8 id: grafana-discourse-datasource version: 1.0.0 id: grafana-dynatrace-datasource version: 2.0.2 id: grafana-enterprise-logs-app version: 2.3.0 id: grafana-enterprise-traces-app version: 1.0.0 id: grafana-googlesheets-datasource version: 1.0.1 id: grafana-iot-sitewise-datasource version: 0.0.1 id: grafana-kairosdb-datasource version: 3.0.2 id: grafana-metrics-enterprise-app version: 3.3.0 id: grafana-newrelic-datasource version: 1.4.0 id: grafana-oracle-datasource version: 1.1.6 id: grafana-piechart-panel version: 1.6.2 id: grafana-polystat-panel version: 1.2.2 id: grafana-servicenow-datasource version: 1.1.1 id: grafana-simple-json-datasource version: 1.4.2 id: grafana-splunk-datasource version: 1.4.1 id: grafana-strava-datasource version: 1.3.0 id: grafana-synthetic-monitoring-app version: 0.8.13 id: grafana-worldmap-panel version: 0.3.3 id: gretamosa-topology-panel version: 1.0.1 id: gridprotectionalliance-openhistorian-datasource version: 1.0.3 id: gridprotectionalliance-osisoftpi-datasource version: 1.1.1 id: hadesarchitect-cassandra-datasource version: 1.1.4 id: hawkular-datasource version: 1.1.2 id: humio-datasource version: 3.1.1 id: ibm-apm-datasource version: 0.9.1 id: innius-video-panel version: 1.0.1 id: instana-datasource version: 3.1.0 id: jasonlashua-prtg-datasource version: 4.0.4 id: jdbranham-diagram-panel version: 1.6.2 id: jeanbaptistewatenberg-percent-panel version: 1.0.6 id: larona-epict-panel version: 1.2.2 id: linksmart-hds-datasource version: 1.0.2 id: linksmart-sensorthings-datasource version: 1.3.1 id: macropower-analytics-panel version: 1.1.2 id: magnesium-wordcloud-panel version: 1.1.3 id: marcuscalidus-svg-panel version: 0.3.4 id: marcusolsson-dynamictext-panel version: 1.0.1 id: marcusolsson-hourly-heatmap-panel version: 0.6.0 id: marcusolsson-json-datasource version: 0.4.0 id: marcusolsson-static-datasource version: 1.0.1 id: marcusolsson-treemap-panel version: 0.3.0 id: michaeldmoore-annunciator-panel version: 1.0.5 id: michaeldmoore-multistat-panel version: 1.4.1 id: monasca-datasource version: 1.0.1 id: monitoringartist-monitoringart-datasource version: 1.0.1 id: moogsoft-aiops-app version: 8.0.1 id: mtanda-google-calendar-datasource version: 1.0.5 id: mtanda-heatmap-epoch-panel version: 0.1.8 id: mtanda-histogram-panel version: 0.1.7 id: mxswat-separator-panel version: 1.0.1 id: natel-discrete-panel version: 0.1.0 id: natel-influx-admin-panel version: 0.0.6 id: natel-plotly-panel version: 0.0.7 id: natel-usgs-datasource version: 0.0.3 id: neocat-cal-heatmap-panel version: 0.0.4 id: novalabs-annotations-panel version: 0.0.2 id: novatec-sdg-panel version: 2.3.1 id: ntop-ntopng-datasource version: 1.0.1 id: oci-logs-datasource version: 1.1.0 id: oci-metrics-datasource version: 3.0.0 id: opennms-helm-app version: 5.0.2 id: ovh-warp10-datasource version: 2.2.1 id: paytm-kapacitor-datasource version: 0.1.3 id: percona-percona-app version: 1.0.1 id: petrslavotinek-carpetplot-panel version: 0.1.2 id: pierosavi-imageit-panel version: 0.1.3 id: pr0ps-trackmap-panel version: 2.1.0 id: praj-ams-datasource version: 1.2.1 id: pue-solr-datasource version: 1.0.3 id: quasardb-datasource version: 3.8.3 id: rackerlabs-blueflood-datasource version: 0.0.3 id: radensolutions-netxms-datasource version: 1.2.3 id: ryantxu-ajax-panel version: 0.0.7-dev id: ryantxu-annolist-panel version: 0.0.2 id: satellogic-3d-globe-panel version: 0.1.1 id: savantly-heatmap-panel version: 0.2.1 id: sbueringer-consul-datasource version: 0.1.5 id: scadavis-synoptic-panel version: 1.0.5 id: sidewinder-datasource version: 0.2.1 id: simpod-json-datasource version: 0.2.0 id: skydive-datasource version: 1.2.1 id: smartmakers-trafficlight-panel version: 1.0.1 id: sni-pnp-datasource version: 1.0.8 id: sni-thruk-datasource version: 1.0.6 id: snuids-radar-panel version: 1.4.5 id: snuids-trafficlights-panel version: 1.4.6 id: speakyourcode-button-panel version: 0.2.1 id: spotify-heroic-datasource version: 0.0.2 id: stagemonitor-elasticsearch-app version: 0.83.3 id: udoprog-heroic-datasource version: 0.1.1 id: vertamedia-clickhouse-datasource version: 2.4.2 id: vertica-grafana-datasource version: 0.1.1 id: vonage-status-panel version: 1.0.11 id: voxter-app version: 0.0.2 id: williamvenner-timepickerbuttons-panel version: 2.0.1 id: xginn8-pagerduty-datasource version: 0.2.2 id: yesoreyeram-boomtable-panel version: 1.4.1 id: yesoreyeram-boomtheme-panel version: 0.1.1 id: yeya24-chaosmesh-datasource version: 0.1.2 id: zuburqan-parity-report-panel version: 1.2.2 Restart grafana after installing plugins . <service grafana-server restart>
Tingo (diskusjon) 13. feb. 2022 kl. 14:35 (CET)
- 2022-02-11
- Created a new "TV - simplified" dashboard in Grafana and set it as the primary item in the playlist. taz (-) 11. feb. 2022 kl. 22:00 (CET)
- Added
--app
flag forchromium-browser
in LXDE's autostart script to prevent "Chrome didn't shut down correctly" popup. taz (-) 11. feb. 2022 kl. 20:20 (CET)
- 2022-01-20
- I added legends to the temperature and humidity graphs in Grafana, so it is easier to see what data the graphs show. Tingo (diskusjon) 20. jan. 2022 kl. 21:18 (CET)
2021
- 2021-06-30
- no data in temperature and humidity graphs in grafana, so I restated the telegraf service via
tingo@iot2:~$ sudo systemctl restart telegraf
. Tingo (diskusjon) 30. jun. 2021 kl. 14:15 (CEST)
- 2021-06-17
- temperature and humidity graphs were empty in grafana, restarting the telegraf service via
tingo@iot2:~$ sudo systemctl restart telegraf
. Tingo (diskusjon) 17. jun. 2021 kl. 16:19 (CEST)
- 2021-05-04
- rebooted infoskjerm.local, as it was having trouble displaying the grafana page in Chromium. Hopefully the reboot helps. Tingo (diskusjon) 4. mai 2021 kl. 13:13 (CEST)
- 2021-02-06
- front door data was not showing in grafana, so I restarted the telegraf service via
tingo@iot2:~$ sudo systemctl restart telegraf
as usual. Tingo (diskusjon) 6. feb. 2021 kl. 21:36 (CET)
2020
- 2020-12-30
- no data showing in Grafana, restarted the telegraf service as usual, via
tingo@iot2:~$ sudo systemctl restart telegraf
. Tingo (diskusjon) 30. des. 2020 kl. 17:15 (CET)
- 2020-10-27
- front door data was not showing in grafana, so I restarted the telegraf service via
tingo@iot2:~$ sudo systemctl restart telegraf
as usual. Tingo (diskusjon) 27. okt. 2020 kl. 15:56 (CET)
- 2020-08-10
- some temperature sensors (Outside, 2nd floor, 4th floor) did not show in grafana, so I restarted the telegraf service (
tingo@iot2:~$ sudo systemctl restart telegraf
). Didn't seem to help, perhaps the sensors need to be fixed? Tingo (diskusjon) 10. aug. 2020 kl. 14:31 (CEST)
- 2020-06-19
- the browser wouldn't reconnect to the server (iot2) after it came back online, so I restarted the pi ('shutdown -r now') that fixed it. Tingo (diskusjon) 19. jun. 2020 kl. 12:55 (CEST)
- 2020-06-18
- environment sensors data was not showing in grafana, so I restarted the telegraf service via
tingo@iot2:~$ sudo systemctl restart telegraf
as usual. Tingo (diskusjon) 19. jun. 2020 kl. 00:24 (CEST)
- 2020-06-03
- environment sensors data was not showing in grafana, so I restarted the telegraf service via
tingo@iot2:~$ sudo systemctl restart telegraf
as usual. Tingo (diskusjon) 3. jun. 2020 kl. 13:11 (CEST)
- 2020-04-25
- front door data was not showing in grafana, so I restarted the telegraf service via
tingo@iot2:~$ sudo systemctl restart telegraf
as usual. Tingo (diskusjon) 25. apr. 2020 kl. 16:49 (CEST)
- 2020-02-20
- environment sensors data was not showing in grafana again. Restarted the telegraf service via
tingo@iot2:~$ sudo systemctl restart telegraf
. Tingo (diskusjon) 20. feb. 2020 kl. 19:16 (CET)
- 2020-02-06
- added more sensors to
/etc/telegraf/telegraf.conf
:
"public/laser/eco2", "public/laser/humidity", "public/laser/pm10", "public/laser/pm25", "public/laser/temperature", "public/laser/tvoc",
and reloaded telegraf with sudo systemctl reload telegraf
. Tingo (diskusjon) 6. feb. 2020 kl. 09:46 (CET)
- 2020-01-30
- added more sensors to
/etc/telegraf/telegraf.conf
:
"public/printerroom/tvoc", "public/printerroom/eco2", "public/printerroom/humidity", "public/printerroom/temperature", "public/lab/pm10", "public/lab/pm25",
and reloaded telegraf with sudo systemctl reload telegraf
. Tingo (diskusjon) 30. jan. 2020 kl. 20:14 (CET)
2019
- 2019-11-11
- front door activity was showing "no data points". restarted telegraf service via
tingo@iot2:~$ sudo systemctl restart telegraf
, it is ok now. Tingo (diskusjon) 14. nov. 2019 kl. 11:27 (CET)
- 2019-09-05
- front door activity was showing "no data points". restarted telegraf service via
tingo@iot2:~$ sudo systemctl restart telegraf
, hopefully it will work. Tingo (diskusjon) 5. sep. 2019 kl. 17:58 (CEST)
- 2019-08-27
- environment sensors data was not showing in grafana again. Restarted the telegraf service. Tingo (diskusjon) 27. aug. 2019 kl. 11:39 (CEST)
- 2019-07-30
- the graphs didn't update on the Pi (update in Grafana was ok). Rebooted the Pi. Tingo (diskusjon) 30. jul. 2019 kl. 09:54 (CEST)
- 2019-07-26
- the graphs didn't update on the Pi (update in Grafana was ok). Rebooted the Pi. Tingo (diskusjon) 26. jul. 2019 kl. 12:36 (CEST)
- 2019-07-03
- the graphs didn't update on the Pi (update in Grafana was ok). Rebooted the Pi. Tingo (diskusjon) 3. jul. 2019 kl. 16:29 (CEST)
- 2019-07-01
- environment sensors data was not showing in grafana again. Restarted the telegraf service. Tingo (diskusjon) 3. jul. 2019 kl. 16:27 (CEST)
- 2019-06-21
- front door activity was showing "no data points". restarted telegraf service via
tingo@iot2:~$ sudo systemctl restart telegraf
, but that didn't have any effect. Tingo (diskusjon) - Ok, with patience the data shows up. Tingo (diskusjon) 21. jun. 2019 kl. 13:21 (CEST)
- 2019-05-09
- environment sensors data was not showing in grafana again. I had to restart the telegraf service via
tingo@iot2:~$ sudo systemctl restart telegraf
- in addition, I had to refresh the browser window on the Pi (connected a keyboard and did Ctrl-R). Tingo (diskusjon) 9. mai 2019 kl. 19:48 (CEST)
- 2019-04-12
- environment sensors data was not showing in grafana again. As usual, a
tingo@iot2:~$ sudo systemctl restart telegraf
- fixed the problem. Tingo (diskusjon) 12. apr. 2019 kl. 15:52 (CEST)
- 2019-01-29
- I also needed to restart the playlist on the welcome screen. Tingo (diskusjon) 29. jan. 2019 kl. 14:39 (CET)
- environment sensors data was not showing in grafana again. The telegraf service reported
tingo@iot2:~$ systemctl status telegraf
● telegraf.service - The plugin-driven server agent for reporting metrics into InfluxDB
Loaded: loaded (/lib/systemd/system/telegraf.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2018-10-12 00:22:04 CEST; 3 months 18 days ago
Docs: https://github.com/influxdata/telegraf
Main PID: 448 (telegraf)
Tasks: 18 (limit: 4915)
CGroup: /system.slice/telegraf.service
└─448 /usr/bin/telegraf -config /etc/telegraf/telegraf.conf -config-directory /etc/te
Jan 29 12:44:30 iot2 telegraf[448]: 2019-01-29T11:44:30Z E! Error in plugin [inputs.mqtt_consume
Jan 29 12:44:30 iot2 telegraf[448]: error: pingresp not received, disconnecting
Jan 29 12:44:30 iot2 telegraf[448]: MQTT Client will try to reconnect
Jan 29 12:44:30 iot2 telegraf[448]: 2019-01-29T11:44:30Z I! MQTT Client Connected
Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailabl
so I restarted the service via
tingo@iot2:~$ sudo systemctl restart telegraf
it looks better now
tingo@iot2:~$ systemctl status telegraf
● telegraf.service - The plugin-driven server agent for reporting metrics into InfluxDB
Loaded: loaded (/lib/systemd/system/telegraf.service; enabled; vendor preset: enabled)
Active: active (running) since Tue 2019-01-29 14:26:32 CET; 8s ago
Docs: https://github.com/influxdata/telegraf
Main PID: 29968 (telegraf)
Tasks: 14 (limit: 4915)
CGroup: /system.slice/telegraf.service
├─29968 /usr/bin/telegraf -config /etc/telegraf/telegraf.conf -config-directory /etc/
└─29981 /bin/ping -c 1 -n -s 16 -i 1 -W 1 -w 10 10.13.37.47
Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! Loaded aggregators:
Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! Loaded processors:
Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! Loaded outputs: influxdb
Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! Tags enabled: host=iot2
Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! Agent Config: Interval:10s, Quiet:
Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! MQTT Client Connected
Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! MQTT Client Connected
Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! MQTT Client Connected
Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! MQTT Client Connected
Jan 29 14:26:33 iot2 telegraf[29968]: 2019-01-29T13:26:33Z I! MQTT Client Connected
Maybe telegraf needs to be restarted every time the mqtt server is restarted? Tingo (diskusjon) 29. jan. 2019 kl. 14:32 (CET)
2018
- 2018-10-12
- grafana-server.service was not enabled on the server, so it didn't start automatically when the server got restarted. Fixed. --Tingo (diskusjon) 12. okt. 2018 kl. 09:16 (UTC)
- 2018-09-18
- measurement
mqtt_consumer
imqtt_bitraf
hadde data som ikke var oppdatert, selv om alle de andre i samme database var oppdatert. "Løst" ved å restarte telegraf vha.sudo systemctl restart telegraf
. --Tingo (diskusjon) 18. sep. 2018 kl. 14:32 (UTC)
Referanser
- ↑ https://grafana.com/grafana Grafana
- ↑ https://www.influxdata.com/time-series-platform/telegraf/ Telegraf
- ↑ https://www.influxdata.com/time-series-platform/influxdb/ Influxdb
- ↑ https://www.influxdata.com/time-series-platform/kapacitor/ Kapacitor
- ↑ https://www.influxdata.com/time-series-platform/chronograf/ Chronograf