Forskjell mellom versjoner av «Dell PowerConnect 5524»

Fra Bitraf
Hopp til navigering Hopp til søk
(stacking connectors are HDMI connectors)
(→‎OpenManage (web gui): bad gui, bad, bad bad gui!)
 
(6 mellomliggende revisjoner av samme bruker vises ikke)
Linje 14: Linje 14:
 
* performance - Forwarding performance: 65.47 Mpps
 
* performance - Forwarding performance: 65.47 Mpps
 
* Remote Management Protocol: SNMP 1, RMON, Telnet, SNMP 2c, HTTP, HTTPS, TFTP, SSH, SSH-2, CLI
 
* Remote Management Protocol: SNMP 1, RMON, Telnet, SNMP 2c, HTTP, HTTPS, TFTP, SSH, SSH-2, CLI
 +
 +
== Management ==
 +
Initial setup has to be done through console access.
 +
 +
=== Console access ===
 +
Console access via RJ45 connector on front. Requires console cable<ref>[https://www.dell.com/support/kbdoc/en-us/000071273/what-type-of-console-cables-are-used-for-dell-powerconnect-n-series-and-force10-switches PowerConnect - console cable]</ref>. It looks like a Cisco console cable (DE9 - RJ45) will work.
 +
 +
; 2022-08-16 : console access - using a Cisco console cable works, at 9600 baud. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 16. aug. 2022 kl. 18:58 (CEST)
 +
 +
== OpenManage (web gui) ==
 +
After initial setup, the web gui (OpenManage) can be used to configure and manage the switch. The gui isn't very good.
  
 
== Documentation ==
 
== Documentation ==
Linje 23: Linje 34:
  
 
== History ==
 
== History ==
 +
; 2022-08-16 : upgrade firware from serial console, from a usb stick (fat32 formatted)
 +
<pre>
 +
console# copy usb://powerconnect_55xx_boot-10014.rfb boot
 +
01-Oct-2006 19:35:00 %COPY-I-FILECPY: Files Copy - source URL usb://powerconnect_55xx_boot-10014.rfb destination URL flash://BOOT
 +
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!01-Oct-2006 19:35:13 %COPY-N-TRAP: The copy operation was completed successfully
 +
!
 +
Copy: 524304 bytes copied in 00:00:13 [hh:mm:ss]
 +
 +
console# copy usb://powerconnect_55xx-41024.ros image
 +
01-Oct-2006 19:36:57 %COPY-I-FILECPY: Files Copy - source URL usb://powerconnect_55xx-41024.ros destination URL flash://image
 +
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 +
[..]
 +
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!01-Oct-2006 19:39:35 %COPY-N-TRAP: The copy operation was completed successfully
 +
!
 +
Copy: 6288288 bytes copied in 00:02:38 [hh:mm:ss]
 +
 +
 +
console# show bootvar
 +
Unit  Image  Filename  Version    Date                    Status
 +
----  -----  ---------  ---------  ---------------------  -----------
 +
1    1      image-1    4.0.1.11  16-Oct-2011  18:10:50  Active*
 +
1    2      image-2    4.1.0.24  01-Sep-2020  14:40:38  Not active
 +
 +
"*" designates that the image was selected for the next boot
 +
 +
console# boot system image-2
 +
 +
console# reload
 +
This command will reset the whole system and disconnect your current session. Do you want to continue ? (Y/N)[N] Y
 +
Shutting down ...
 +
</pre>
 +
after reboot, it shows
 +
<pre>
 +
console> show version
 +
 +
      Unit            SW version        Boot version        HW version     
 +
------------------- ------------------- ------------------- -------------------
 +
        1              4.1.0.24            1.0.0.14            00.00.02     
 +
console# show bootvar
 +
Unit  Image  Filename  Version    Date                    Status
 +
----  -----  ---------  ---------  ---------------------  -----------
 +
1    1      image-1    4.0.1.11  16-Oct-2011  18:10:50  Not active
 +
1    2      image-2    4.1.0.24  01-Sep-2020  14:40:38  Active*
 +
 +
"*" designates that the image was selected for the next boot
 +
</pre>
 +
[[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 16. aug. 2022 kl. 20:40 (CEST)
 +
 +
: the firmware and other versions are
 +
<pre>
 +
console# show ver
 +
 +
      Unit            SW version        Boot version        HW version     
 +
------------------- ------------------- ------------------- -------------------
 +
        1              4.0.1.11            1.0.0.12            00.00.02     
 +
</pre>
 +
[[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 16. aug. 2022 kl. 19:41 (CEST)
 +
 
; 2022-08-12 : a Bitraf member graciously donated a Dell PowerConnect 5524 and two other gigabit switches. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 15. aug. 2022 kl. 19:35 (CEST)
 
; 2022-08-12 : a Bitraf member graciously donated a Dell PowerConnect 5524 and two other gigabit switches. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 15. aug. 2022 kl. 19:35 (CEST)
  

Nåværende revisjon fra 16. aug. 2022 kl. 19:43

Dell PowerConnect 5524. Network switch.

Interesting fact: the 5500 series uses two HDMI connectors as the stacking connectors (10 Gbps).

Specifications

  • managed
  • stackable
  • Layer 3
  • 24 x 10/100/1000 ports
  • 2 x 10 Gbps SFP+ ports
  • 1 x USB port
  • Authentication: RADIUS, TACACS+
  • performance - Switching capacity: 128 Gbps
  • performance - Forwarding performance: 65.47 Mpps
  • Remote Management Protocol: SNMP 1, RMON, Telnet, SNMP 2c, HTTP, HTTPS, TFTP, SSH, SSH-2, CLI

Management

Initial setup has to be done through console access.

Console access

Console access via RJ45 connector on front. Requires console cable[1]. It looks like a Cisco console cable (DE9 - RJ45) will work.

2022-08-16 
console access - using a Cisco console cable works, at 9600 baud. Tingo (diskusjon) 16. aug. 2022 kl. 18:58 (CEST)

OpenManage (web gui)

After initial setup, the web gui (OpenManage) can be used to configure and manage the switch. The gui isn't very good.

Documentation

  • PowerConnect 5500 Series Getting Started Guide[2]
  • PowerConnect 5500 Series User Guide[3]
  • PowerConnect 5500 Series Command Line Interface Guide[4]
  • PowerConnect 5500 Series Release Notes[5]
  • Dell PowerConnect 5524 Command Line Interface Reference Guide[6]

History

2022-08-16 
upgrade firware from serial console, from a usb stick (fat32 formatted)
console# copy usb://powerconnect_55xx_boot-10014.rfb boot 
01-Oct-2006 19:35:00 %COPY-I-FILECPY: Files Copy - source URL usb://powerconnect_55xx_boot-10014.rfb destination URL flash://BOOT
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!01-Oct-2006 19:35:13 %COPY-N-TRAP: The copy operation was completed successfully
!
Copy: 524304 bytes copied in 00:00:13 [hh:mm:ss]

console# copy usb://powerconnect_55xx-41024.ros image
01-Oct-2006 19:36:57 %COPY-I-FILECPY: Files Copy - source URL usb://powerconnect_55xx-41024.ros destination URL flash://image
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[..]
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!01-Oct-2006 19:39:35 %COPY-N-TRAP: The copy operation was completed successfully
!
Copy: 6288288 bytes copied in 00:02:38 [hh:mm:ss]


console# show bootvar
Unit  Image  Filename   Version    Date                    Status
----  -----  ---------  ---------  ---------------------   -----------
1     1      image-1    4.0.1.11   16-Oct-2011  18:10:50   Active* 
1     2      image-2    4.1.0.24   01-Sep-2020  14:40:38   Not active

"*" designates that the image was selected for the next boot

console# boot system image-2

console# reload
This command will reset the whole system and disconnect your current session. Do you want to continue ? (Y/N)[N] Y
Shutting down ...

after reboot, it shows 

console> show version 

       Unit             SW version         Boot version         HW version      
------------------- ------------------- ------------------- ------------------- 
         1               4.1.0.24            1.0.0.14            00.00.02       
console# show bootvar
Unit  Image  Filename   Version    Date                    Status
----  -----  ---------  ---------  ---------------------   -----------
1     1      image-1    4.0.1.11   16-Oct-2011  18:10:50   Not active
1     2      image-2    4.1.0.24   01-Sep-2020  14:40:38   Active* 

"*" designates that the image was selected for the next boot

Tingo (diskusjon) 16. aug. 2022 kl. 20:40 (CEST)

the firmware and other versions are
console# show ver

       Unit             SW version         Boot version         HW version      
------------------- ------------------- ------------------- ------------------- 
         1               4.0.1.11            1.0.0.12            00.00.02

Tingo (diskusjon) 16. aug. 2022 kl. 19:41 (CEST)

2022-08-12 
a Bitraf member graciously donated a Dell PowerConnect 5524 and two other gigabit switches. Tingo (diskusjon) 15. aug. 2022 kl. 19:35 (CEST)

References

  1. ↑ PowerConnect - console cable
  2. ↑ PowerConnect 5500 Series Getting Started Guide
  3. ↑ PowerConnect 5500 Series User Guide
  4. ↑ PowerConnect 5500 Series Command Line Interface Guide
  5. ↑ PowerConnect 5500 Series Release Notes
  6. ↑ Dell PowerConnect 5524 Command Line Interface Reference Guide
Hentet fra «https://wiki.bitraf.no/w/index.php?title=Dell_PowerConnect_5524&oldid=8421»