Forskjell mellom versjoner av «Dell PowerConnect 5524»
Hopp til navigering
Hopp til søk
(→History: firmware and so on) |
(→History: upgraded the boot code and firmware) |
||
| Linje 34: | Linje 34: | ||
== History == | == History == | ||
| − | ; 2022-08-16 : the firmware and other versions are | + | ; 2022-08-16 : upgrade firware from serial console, from a usb stick (fat32 formatted) |
| + | <pre> | ||
| + | console# copy usb://powerconnect_55xx_boot-10014.rfb boot | ||
| + | 01-Oct-2006 19:35:00 %COPY-I-FILECPY: Files Copy - source URL usb://powerconnect_55xx_boot-10014.rfb destination URL flash://BOOT | ||
| + | !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!01-Oct-2006 19:35:13 %COPY-N-TRAP: The copy operation was completed successfully | ||
| + | ! | ||
| + | Copy: 524304 bytes copied in 00:00:13 [hh:mm:ss] | ||
| + | |||
| + | console# copy usb://powerconnect_55xx-41024.ros image | ||
| + | 01-Oct-2006 19:36:57 %COPY-I-FILECPY: Files Copy - source URL usb://powerconnect_55xx-41024.ros destination URL flash://image | ||
| + | !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! | ||
| + | [..] | ||
| + | !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!01-Oct-2006 19:39:35 %COPY-N-TRAP: The copy operation was completed successfully | ||
| + | ! | ||
| + | Copy: 6288288 bytes copied in 00:02:38 [hh:mm:ss] | ||
| + | |||
| + | |||
| + | console# show bootvar | ||
| + | Unit Image Filename Version Date Status | ||
| + | ---- ----- --------- --------- --------------------- ----------- | ||
| + | 1 1 image-1 4.0.1.11 16-Oct-2011 18:10:50 Active* | ||
| + | 1 2 image-2 4.1.0.24 01-Sep-2020 14:40:38 Not active | ||
| + | |||
| + | "*" designates that the image was selected for the next boot | ||
| + | |||
| + | console# boot system image-2 | ||
| + | |||
| + | console# reload | ||
| + | This command will reset the whole system and disconnect your current session. Do you want to continue ? (Y/N)[N] Y | ||
| + | Shutting down ... | ||
| + | </pre> | ||
| + | after reboot, it shows | ||
| + | <pre> | ||
| + | console> show version | ||
| + | |||
| + | Unit SW version Boot version HW version | ||
| + | ------------------- ------------------- ------------------- ------------------- | ||
| + | 1 4.1.0.24 1.0.0.14 00.00.02 | ||
| + | console# show bootvar | ||
| + | Unit Image Filename Version Date Status | ||
| + | ---- ----- --------- --------- --------------------- ----------- | ||
| + | 1 1 image-1 4.0.1.11 16-Oct-2011 18:10:50 Not active | ||
| + | 1 2 image-2 4.1.0.24 01-Sep-2020 14:40:38 Active* | ||
| + | |||
| + | "*" designates that the image was selected for the next boot | ||
| + | </pre> | ||
| + | [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 16. aug. 2022 kl. 20:40 (CEST) | ||
| + | |||
| + | : the firmware and other versions are | ||
<pre> | <pre> | ||
console# show ver | console# show ver | ||
Revisjonen fra 16. aug. 2022 kl. 19:41
Dell PowerConnect 5524. Network switch.
Interesting fact: the 5500 series uses two HDMI connectors as the stacking connectors (10 Gbps).
Innhold
Specifications
- managed
- stackable
- Layer 3
- 24 x 10/100/1000 ports
- 2 x 10 Gbps SFP+ ports
- 1 x USB port
- Authentication: RADIUS, TACACS+
- performance - Switching capacity: 128 Gbps
- performance - Forwarding performance: 65.47 Mpps
- Remote Management Protocol: SNMP 1, RMON, Telnet, SNMP 2c, HTTP, HTTPS, TFTP, SSH, SSH-2, CLI
Management
Initial setup has to be done through console access.
Console access
Console access via RJ45 connector on front. Requires console cable[1]. It looks like a Cisco console cable (DE9 - RJ45) will work.
- 2022-08-16
- console access - using a Cisco console cable works, at 9600 baud. Tingo (diskusjon) 16. aug. 2022 kl. 18:58 (CEST)
OpenManage (web gui)
After initial setup, the web gui (OpenManage) can be used to configure and manage the switch.
Documentation
- PowerConnect 5500 Series Getting Started Guide[2]
- PowerConnect 5500 Series User Guide[3]
- PowerConnect 5500 Series Command Line Interface Guide[4]
- PowerConnect 5500 Series Release Notes[5]
- Dell PowerConnect 5524 Command Line Interface Reference Guide[6]
History
- 2022-08-16
- upgrade firware from serial console, from a usb stick (fat32 formatted)
console# copy usb://powerconnect_55xx_boot-10014.rfb boot 01-Oct-2006 19:35:00 %COPY-I-FILECPY: Files Copy - source URL usb://powerconnect_55xx_boot-10014.rfb destination URL flash://BOOT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!01-Oct-2006 19:35:13 %COPY-N-TRAP: The copy operation was completed successfully ! Copy: 524304 bytes copied in 00:00:13 [hh:mm:ss] console# copy usb://powerconnect_55xx-41024.ros image 01-Oct-2006 19:36:57 %COPY-I-FILECPY: Files Copy - source URL usb://powerconnect_55xx-41024.ros destination URL flash://image !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! [..] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!01-Oct-2006 19:39:35 %COPY-N-TRAP: The copy operation was completed successfully ! Copy: 6288288 bytes copied in 00:02:38 [hh:mm:ss] console# show bootvar Unit Image Filename Version Date Status ---- ----- --------- --------- --------------------- ----------- 1 1 image-1 4.0.1.11 16-Oct-2011 18:10:50 Active* 1 2 image-2 4.1.0.24 01-Sep-2020 14:40:38 Not active "*" designates that the image was selected for the next boot console# boot system image-2 console# reload This command will reset the whole system and disconnect your current session. Do you want to continue ? (Y/N)[N] Y Shutting down ...
after reboot, it shows
console> show version
Unit SW version Boot version HW version
------------------- ------------------- ------------------- -------------------
1 4.1.0.24 1.0.0.14 00.00.02
console# show bootvar
Unit Image Filename Version Date Status
---- ----- --------- --------- --------------------- -----------
1 1 image-1 4.0.1.11 16-Oct-2011 18:10:50 Not active
1 2 image-2 4.1.0.24 01-Sep-2020 14:40:38 Active*
"*" designates that the image was selected for the next boot
Tingo (diskusjon) 16. aug. 2022 kl. 20:40 (CEST)
- the firmware and other versions are
console# show ver
Unit SW version Boot version HW version
------------------- ------------------- ------------------- -------------------
1 4.0.1.11 1.0.0.12 00.00.02
Tingo (diskusjon) 16. aug. 2022 kl. 19:41 (CEST)
- 2022-08-12
- a Bitraf member graciously donated a Dell PowerConnect 5524 and two other gigabit switches. Tingo (diskusjon) 15. aug. 2022 kl. 19:35 (CEST)
