Forskjell mellom versjoner av «Tool»
(Ny side: Bitraf's tool locking system is described here) |
|||
| Linje 1: | Linje 1: | ||
| − | Bitraf' | + | Bitraf has many machines that can be dangerous to both the user and others if used incorrectly. To prevent incorrect use, special training is required for these tools. When training is completed, you'll be added to the group of people (organised as "Circles") that can access this tool. |
| + | |||
| + | If you have taken the required course, but are not in the circle - please contact one of the Circle admins. Ask a fellow Bitraf'er who can help you. Initially, only the laser cutters have access control, but all dangerous tools will have this eventually. | ||
| + | |||
| + | == Checking in a tool == | ||
| + | To checkout a tool, go to https://p2k16.bitraf.no/#!/tool. '''DO NOT''' check out a tool "just to test" or to show people '''UNLESS''' you are physically present and know the tool is not in use. For now, the system is set up so that anyone can take control over a tool at any time. Taking over a tool such as the laser cutter while it is in operation will physically stop it from lasing and can thus potentially destroy the material and work that others have done. They will however know who did it as all tool checkin and checkout is logged. | ||
| + | |||
| + | If you absolutely want to test how the system works, please use the "Test-tool" since this will not affect the other tools. | ||
| + | |||
| + | == Checking out a tool == | ||
| + | When you finished using a tool | ||
Revisjonen fra 26. jan. 2019 kl. 01:13
Bitraf has many machines that can be dangerous to both the user and others if used incorrectly. To prevent incorrect use, special training is required for these tools. When training is completed, you'll be added to the group of people (organised as "Circles") that can access this tool.
If you have taken the required course, but are not in the circle - please contact one of the Circle admins. Ask a fellow Bitraf'er who can help you. Initially, only the laser cutters have access control, but all dangerous tools will have this eventually.
Checking in a tool
To checkout a tool, go to https://p2k16.bitraf.no/#!/tool. DO NOT check out a tool "just to test" or to show people UNLESS you are physically present and know the tool is not in use. For now, the system is set up so that anyone can take control over a tool at any time. Taking over a tool such as the laser cutter while it is in operation will physically stop it from lasing and can thus potentially destroy the material and work that others have done. They will however know who did it as all tool checkin and checkout is logged.
If you absolutely want to test how the system works, please use the "Test-tool" since this will not affect the other tools.
Checking out a tool
When you finished using a tool
