WoodLathe - Sideversjonshistorikk

Jensa på 21. jul. 2026 kl. 14:19

2026-07-21T14:19:28Z

← Eldre sideversjon		Sideversjonen fra 21. jul. 2026 kl. 14:19
Linje 1:		Linje 1:
	Bitraf has a lathe for [[Dreiebenk \| metal]], but this page is for the [https://www.drechselbedarf-schulte.de/drechselbaenke-maschinen/drechselbaenke/midi-2 DM MIDI2 PLUS] wood lathe located in the woodworking workshop.		Bitraf has a lathe for [[Dreiebenk \| metal]], but this page is for the [https://www.drechselbedarf-schulte.de/drechselbaenke-maschinen/drechselbaenke/midi-2 DM MIDI2 PLUS] wood lathe located in the woodworking workshop.

	To use this machine, you need to have completed the [[Tormek_T8_slipemaskin \| Tormek training]] as well as to [https://youtu.be/GRvGjNlhQe4 learn the contents of this instruction video]. Once you've wathed the video and have the Tormek training, you should learn how to sharpen the wood turning tools with the Tormek. Follow the '''instruction booklet in the TNT-808 tool case''' under the Tormek machine for each of the tools you have used. [https://www.youtube.com/watch?v=N18cfGqZc0A This video can be a good refresher] if it's been a while since you last did this.		To use this machine, you need to have completed the [[Tormek_T8_slipemaskin \| Tormek training]] as well as to [https://youtu.be/GRvGjNlhQe4 learn the contents of this instruction video]. Once you've wathed the video and have the Tormek training, you should learn how to sharpen the wood turning tools with the Tormek. Follow the '''instruction booklet in the TNT-808 tool case''' under the Tormek machine for each of the tools you have used. [https://www.youtube.com/watch?v=N18cfGqZc0A This video can be a good refresher] if it's been a while since you last did this, or if you want to see the process before you start following the more detailed instructions in the TNT-808 tool case.

	'''Characteristics'''		'''Characteristics'''

Jensa på 21. jul. 2026 kl. 14:18

2026-07-21T14:18:41Z

← Eldre sideversjon		Sideversjonen fra 21. jul. 2026 kl. 14:18
Linje 1:		Linje 1:
	Bitraf has a lathe for [[Dreiebenk \| metal]], but this page is for the [https://www.drechselbedarf-schulte.de/drechselbaenke-maschinen/drechselbaenke/midi-2 DM MIDI2 PLUS] wood lathe located in the woodworking workshop.		Bitraf has a lathe for [[Dreiebenk \| metal]], but this page is for the [https://www.drechselbedarf-schulte.de/drechselbaenke-maschinen/drechselbaenke/midi-2 DM MIDI2 PLUS] wood lathe located in the woodworking workshop.

	To use this machine, you need to have completed the [[Tormek_T8_slipemaskin \| Tormek training]] as well as to [https://youtu.be/GRvGjNlhQe4 learn the contents of this instruction video]. Once you've wathed the video and have the Tormek training, you should learn how to sharpen the wood turning tools with the Tormek. Follow the instruction booklet in the TNT-808 tool case under the Tormek machine for each of the tools you have used. [https://www.youtube.com/watch?v=N18cfGqZc0A This video can be a good refresher] if it's been a while since you last did this.		To use this machine, you need to have completed the [[Tormek_T8_slipemaskin \| Tormek training]] as well as to [https://youtu.be/GRvGjNlhQe4 learn the contents of this instruction video]. Once you've wathed the video and have the Tormek training, you should learn how to sharpen the wood turning tools with the Tormek. Follow the '''instruction booklet in the TNT-808 tool case''' under the Tormek machine for each of the tools you have used. [https://www.youtube.com/watch?v=N18cfGqZc0A This video can be a good refresher] if it's been a while since you last did this.

	'''Characteristics'''		'''Characteristics'''

Jensa på 21. jul. 2026 kl. 14:18

2026-07-21T14:18:26Z

← Eldre sideversjon		Sideversjonen fra 21. jul. 2026 kl. 14:18
Linje 1:		Linje 1:
	Bitraf has a lathe for [[Dreiebenk \| metal]], but this page is for the [https://www.drechselbedarf-schulte.de/drechselbaenke-maschinen/drechselbaenke/midi-2 DM MIDI2 PLUS] wood lathe located in the woodworking workshop. To use this machine, you need to have completed the [[Tormek_T8_slipemaskin \| Tormek training]] as well as to [https://youtu.be/GRvGjNlhQe4 learn the contents of this instruction video].		Bitraf has a lathe for [[Dreiebenk \| metal]], but this page is for the [https://www.drechselbedarf-schulte.de/drechselbaenke-maschinen/drechselbaenke/midi-2 DM MIDI2 PLUS] wood lathe located in the woodworking workshop.

			To use this machine, you need to have completed the [[Tormek_T8_slipemaskin \| Tormek training]] as well as to [https://youtu.be/GRvGjNlhQe4 learn the contents of this instruction video]. Once you've wathed the video and have the Tormek training, you should learn how to sharpen the wood turning tools with the Tormek. Follow the instruction booklet in the TNT-808 tool case under the Tormek machine for each of the tools you have used. [https://www.youtube.com/watch?v=N18cfGqZc0A This video can be a good refresher] if it's been a while since you last did this.

	'''Characteristics'''		'''Characteristics'''

Jensa på 18. jul. 2026 kl. 21:18

2026-07-18T21:18:43Z

← Eldre sideversjon		Sideversjonen fra 18. jul. 2026 kl. 21:18
Linje 2:		Linje 2:

	'''Characteristics'''		'''Characteristics'''
	Turning diameter above the bench bed: 355 mm		{\| class="wikitable"
	Speed control: Continuously electronic / 3 pulleys		\|-
	Bench bed length: 730 mm		\| Turning diameter above the bench bed: \|\| 355 mm
	Width at max. center distance: 980 mm		\|-
	Bench bed width: 115 mm		\| Speed control: \|\| Continuously electronic / 3 pulleys
	Weight: 53 kg		\|-
	Hand rest pin: 1" / 25.4 mm		\| Bench bed length: \|\| 730 mm
	Speeds: 60 - 1000 / 150 - 1900 / 350 - 3700 rpm		\|-
	Manufacturer's warranty: 5 years		\| Width at max. center distance: \|\| 980 mm
	Height from floor to spindle center with base frame: 1155 - 1205 mm		\|-
	Bearing distance: 130 mm		\| Bench bed width: \|\| 115 mm
	~~Mobile control box: Available~~		\|-
	Minimum width: 810 mm		\| Weight: \|\| 53 kg
	Mains connection: 230 volts, 50 Hz		\|-
	Tailstock taper: MK2 with measuring scale on the quillMK2, interchangeable quill 100 mm, trapezoidal thread and measuring scale		\| Hand rest pin: \|\| 1" / 25.4 mm
	Tailstock stroke: 100 mm		\|-
	Tailstock thread: Trapezoidal thread		\| Speeds: \|\| 60 - 1000 / 150 - 1900 / 350 - 3700 rpm
	Tailstock: Drilled through, tool ejectable		\|-
	Peak height: 178 mm		\| Manufacturer's warranty: \|\| 5 years
	Headstock: cannot be rotated or moved		\|-
	Spindle inner cone: MK2		\| Height from floor to spindle center with base frame: \|\| 1155 - 1205 mm
	Partial setup: 24 - Step		\|-
	Forward/Reverse: Available		\| Bearing distance: \|\| 130 mm
	Motor: 0.75 kW / 1 HP (230 V)		\|-
	Spindle thread: M33 x 3.5 mm DIN 800		\| Minimum width: \|\| 810 mm
	~~Packaging / Pallet: L x D x H 900 x 500 x 700 mm~~		\|-
	Dimensions: L x D x H: 855 x 370 x 435 mm		\| Mains connection: \|\| 230 volts, 50 Hz
	Manufacturer: Turning supplies Schulte		\|-
	Tip width: 430 mm		\| Tailstock taper: \|\| MK2 with measuring scale on the quillMK2, interchangeable quill 100 mm, trapezoidal thread and measuring scale
			\|-
			\| Tailstock stroke: \|\| 100 mm
			\|-
			\| Tailstock thread: \|\| Trapezoidal thread
			\|-
			\| Tailstock: \|\| Drilled through, tool ejectable
			\|-
			\| Peak height: \|\| 178 mm
			\|-
			\| Headstock: \|\| cannot be rotated or moved
			\|-
			\| Spindle inner cone: \|\| MK2
			\|-
			\| Partial setup: \|\| 24 - Step
			\|-
			\| Forward/Reverse: \|\| Available
			\|-
			\| Motor: \|\| 0.75 kW / 1 HP (230 V)
			\|-
			\| Spindle thread: \|\| M33 x 3.5 mm DIN 800
			\|-
			\| Dimensions: \|\| L x D x H: 855 x 370 x 435 mm
			\|-
			\| Manufacturer: \|\| Turning supplies Schulte
			\|-
			\| Tip width: \|\| 430 mm
			\|-
			\|}

	'''Included extras we have for this machine:'''		'''Included extras we have for this machine:'''

Jensa på 18. jul. 2026 kl. 21:14

2026-07-18T21:14:34Z

@@ Linje 1: / Linje 1: @@
 Bitraf has a lathe for [[Dreiebenk | metal]], but this page is for the [https://www.drechselbedarf-schulte.de/drechselbaenke-maschinen/drechselbaenke/midi-2 DM MIDI2 PLUS] wood lathe located in the woodworking workshop. To use this machine, you need to have completed the [[Tormek_T8_slipemaskin | Tormek training]] as well as to [https://youtu.be/GRvGjNlhQe4 learn the contents of this instruction video].
 '''Characteristics'''
@@ Linje 63: / Linje 34: @@
 '''Included extras we have for this machine:'''
 Bench bed, headstock and tailstock (made of solid cast iron)
 Four-prong driver MK2
 Revolving center MK2
@@ Linje 70: / Linje 42: @@
 Magnetic, mobile control box
 Handwheel made of steel
 The Midi 2 PLUS allows you to tackle even larger turning projects. Combined with the optional quartz-filled base, the machine becomes a powerful, smooth-running machine capable of processing even larger blanks. The tailstock features a solid design with a 100 mm quill stroke and trapezoidal thread, ideal for deep drilling. The MK2 taper includes a measuring scale for precise drilling.
 [[Category:Tools]] [[Category:English]]

Jensa på 18. jul. 2026 kl. 20:54

2026-07-18T20:54:19Z

← Eldre sideversjon		Sideversjonen fra 18. jul. 2026 kl. 20:54
Linje 1:		Linje 1:
	Bitraf has a lathe for [[Dreiebenk \| metal]], but this page is for the ~~'''~~DM MIDI2 PLUS~~'''~~ wood lathe located in the woodworking workshop. To use this machine, you need to have completed the [[Tormek_T8_slipemaskin \| Tormek training]] as well as to [https://youtu.be/GRvGjNlhQe4 learn the contents of this instruction video].		Bitraf has a lathe for [[Dreiebenk \| metal]], but this page is for the [https://www.drechselbedarf-schulte.de/drechselbaenke-maschinen/drechselbaenke/midi-2 DM MIDI2 PLUS] wood lathe located in the woodworking workshop. To use this machine, you need to have completed the [[Tormek_T8_slipemaskin \| Tormek training]] as well as to [https://youtu.be/GRvGjNlhQe4 learn the contents of this instruction video].

	'''Product/Marketing information'''		'''Product/Marketing information'''

Jensa på 18. jul. 2026 kl. 20:51

2026-07-18T20:51:54Z

← Eldre sideversjon		Sideversjonen fra 18. jul. 2026 kl. 20:51
Linje 1:		Linje 1:
	Bitraf has a lathe for [[Dreiebenk \| metal]], but this page is for the '''DM MIDI2 PLUS''' wood lathe located in the woodworking workshop. To use this machine, you need to have completed the [[Tormek_T8_slipemaskin Tormek training]] as well as to [https://youtu.be/GRvGjNlhQe4 learn the contents of this instruction video].		Bitraf has a lathe for [[Dreiebenk \| metal]], but this page is for the '''DM MIDI2 PLUS''' wood lathe located in the woodworking workshop. To use this machine, you need to have completed the [[Tormek_T8_slipemaskin \| Tormek training]] as well as to [https://youtu.be/GRvGjNlhQe4 learn the contents of this instruction video].

	'''Product/Marketing information'''		'''Product/Marketing information'''

Jensa på 18. jul. 2026 kl. 20:51

2026-07-18T20:51:40Z

← Eldre sideversjon		Sideversjonen fra 18. jul. 2026 kl. 20:51
Linje 1:		Linje 1:
	Bitraf has a lathe for [[Dreiebenk \| metal]], but this page is for the '''DM MIDI2 PLUS''' wood lathe located in the woodworking workshop. To use this machine, you need to have completed the [Tormek_T8_slipemaskin Tormek training] as well as to [https://youtu.be/GRvGjNlhQe4 learn the contents of this instruction video].		Bitraf has a lathe for [[Dreiebenk \| metal]], but this page is for the '''DM MIDI2 PLUS''' wood lathe located in the woodworking workshop. To use this machine, you need to have completed the [[Tormek_T8_slipemaskin Tormek training]] as well as to [https://youtu.be/GRvGjNlhQe4 learn the contents of this instruction video].

	'''Product/Marketing information'''		'''Product/Marketing information'''

Jensa på 18. jul. 2026 kl. 20:51

2026-07-18T20:51:17Z

← Eldre sideversjon		Sideversjonen fra 18. jul. 2026 kl. 20:51
Linje 1:		Linje 1:
	Bitraf has a lathe for [[Dreiebenk \| metal]], but this page is for the '''DM MIDI2 PLUS''' wood lathe located in the woodworking workshop. To use this machine, you need to have ~~done~~ the Tormek training as well as to [https://youtu.be/GRvGjNlhQe4 learn the contents of this instruction video].		Bitraf has a lathe for [[Dreiebenk \| metal]], but this page is for the '''DM MIDI2 PLUS''' wood lathe located in the woodworking workshop. To use this machine, you need to have completed the [Tormek_T8_slipemaskin Tormek training] as well as to [https://youtu.be/GRvGjNlhQe4 learn the contents of this instruction video].

	'''Product/Marketing information'''		'''Product/Marketing information'''

Jensa på 18. jul. 2026 kl. 20:50

2026-07-18T20:50:43Z

← Eldre sideversjon		Sideversjonen fra 18. jul. 2026 kl. 20:50
Linje 1:		Linje 1:
	Bitraf has a lathe for [[Dreiebenk \| metal]], but this page is for the '''DM MIDI2 PLUS''' wood lathe located in the woodworking workshop. To use this machine, you need to have done the Tormek training as well as to ~~(learn the contents of this instruction video)~~[https://youtu.be/GRvGjNlhQe4].		Bitraf has a lathe for [[Dreiebenk \| metal]], but this page is for the '''DM MIDI2 PLUS''' wood lathe located in the woodworking workshop. To use this machine, you need to have done the Tormek training as well as to [https://youtu.be/GRvGjNlhQe4 learn the contents of this instruction video].

	'''Product/Marketing information'''		'''Product/Marketing information'''