ShopBot - Revisjonshistorikk

Steinartorsvik på 23. feb. 2026 kl. 17:23

2026-02-23T17:23:54Z

Steinartorsvik på 27. jun. 2023 kl. 17:30

2023-06-27T17:30:38Z

Steinartorsvik på 6. jun. 2023 kl. 19:07

2023-06-06T19:07:10Z

Steinartorsvik på 6. jun. 2023 kl. 19:06

2023-06-06T19:06:08Z

Steinartorsvik på 6. jun. 2023 kl. 19:05

2023-06-06T19:05:20Z

Steinartorsvik på 6. jun. 2023 kl. 19:01

2023-06-06T19:01:10Z

Steinartorsvik på 2. mai 2023 kl. 12:56

2023-05-02T12:56:45Z

Steinartorsvik på 2. mai 2023 kl. 12:45

2023-05-02T12:45:17Z

Steinartorsvik på 2. mai 2023 kl. 12:38

2023-05-02T12:38:43Z

Steinartorsvik på 2. mai 2023 kl. 12:33

2023-05-02T12:33:28Z

@@ Linje 18: / Linje 18: @@
 {{Infoboxround|color=Orange|text=
-'''NEW: May 02, 2023 - Send a Shopbot status report on #cnc at Slack when you are done.'''
+'''NEW: Feb 23, 2026 - Shopbot computer replaced. Report all usage , issues and stuff that works on #cnc at Slack when you are done.'''
-Example: I'm finished with the Shopbot now and all went well.
+New software version.
-Report any incident. We understand that things do happen but we need to know so we can perform adjustments or repairs.
+If it doesn't work at all, the old computer is still there and can be reconnected (passcode: 20230606)
-{{Infoboxround|color=Orange|text=
+Most of the safety checks has been temporary disabled. Will be turned back when the new computer is happy and working well.
-* Bitraf no longer provides collets or collet-nuts for community use. Buy your own in bitmart
+'''Current passcode: 20260223'''
 }}
 {{Infoboxround|color=Orange|text=
-'''ShopBot rules - last updated May 02, 2023'''
+'''NEW: A while ago but still relevant'''
+* Z probe does not ground on spindle chassis. Must be grounded at tool/bit. If you don't know how to do this ask for help. Always check for the green light when tap testing Z zero.
 }}
@@ Linje 73: / Linje 53: @@
 Don't be afraid to ask for help. Post questions and ask for advice on Slack at the #cnc channel.
 === Allowed materials ===
@@ Linje 78: / Linje 69: @@
 * Plastic
 * Aluminium
 === Lubrication ===
@@ Linje 480: / Linje 472: @@
 Passcode can be updated by editing shopbot.opt file at Program Files (x86)\ShopBot\Shopbot 3\shopbot.opt . It can also be disabled in this file.

@@ Linje 15: / Linje 15: @@
 }}
 == Announcements ==
 {{Infoboxround|color=Orange|text=

@@ Linje 19: / Linje 19: @@
 '''NEW: June 06, 2023'''
-* The pinion for the Y axis is worn and probably causes backlash. '''STOP IMMEDIATLY AND REPORT TO SLACK IF ANY PROBLEMS OR BAD NOISES'''
+* The pinion for the Y axis is worn and probably causes backlash. '''STOP IMMEDIATELY AND REPORT TO SLACK ANY PROBLEMS OR BAD NOISES'''
 * The shopbot is not in good condition, it's available but be aware that it may not cut properly

@@ Linje 19: / Linje 19: @@
 '''NEW: June 06, 2023'''
-* The pinion for the Y axis is worn and probably causes backlash. '''STOP IMMEDIATLY AND REPORT IMMEDIATLY TO SLACK IF ANY PROBLEMS'''
+* The pinion for the Y axis is worn and probably causes backlash. '''STOP IMMEDIATLY AND REPORT TO SLACK IF ANY PROBLEMS OR BAD NOISES'''
 * The shopbot is not in good condition, it's available but be aware that it may not cut properly

@@ Linje 46: / Linje 46: @@
 * Bitraf no longer provides collets or collet-nuts for community use. Buy your own in bitmart
 * Automatic Z probe is out of order. Use manual probe (ask at #cnc if you need help)
 }}
@@ Linje 159: / Linje 158: @@
 * If shopbot application is running, close it
 * Start the shopbot application by using the shortcut on the taskbar or the desktop.
 * During startup you will be prompted to load new configuration settings. Press YES on the first message box and OK on the second.
 * Choose the file called bitraf-default. Never use custom configuration without approval from a ShopBot administrator.
@@ Linje 210: / Linje 210: @@
 == Kalibrering ==
 === X og Y aksene ===
@@ Linje 381: / Linje 378: @@
 # Legg i materialet
 # Fest med clamps
-# Automatisk kalibrering av XYZ med kommandoen '''C4'''.
+# Kjør til stabilt underlag og legg under kalibreringsplaten, kommando '''C2'''. Klem kalibreringsplaten ned mens du kjører kalibreringen, hold fingrene i god avstand fra biten
 # Set ev egen origo med med K og "zero axis" - blå knapp. Pass på å ikke resette Z aksen. Den bør kun settes ved kalibrering og ikke manuelt.
 # Sett på støvhette
@@ Linje 407: / Linje 403: @@
 * Ved feilmelding om X og Y akse, kjør kommando (kommando '''C3''') for automatisk kalibrering av X, Y aksen i forhold til offerplata
-* Ved feilmelding om Z akse, kalibrer Z aksen automatisk med kommandoen (kommando '''C4''') eller manuelt med (kommando '''C2''')
+* Ved feilmelding om Z akse, kalibrer Z aksen manuelt med (kommando '''C2''')
 '''Feilmeldingen oppstår under fresing:'''

@@ Linje 17: / Linje 17: @@
 {{Infoboxround|color=Orange|text=
-'''NEW: May 02, 2023'''
+'''NEW: June 06, 2023'''
-* There is oil on the spoilboard and dust extraction shoe. This may stain your material. Use at own risk.
+* The pinion for the Y axis is worn and probably causes backlash. '''STOP IMMEDIATLY AND REPORT IMMEDIATLY TO SLACK IF ANY PROBLEMS'''
-* The spanner fitting lock on the shopbot which enables the spindle is worn. Never use spindle without the spanner fitted in this lock.
+* The shopbot is not in good condition, it's available but be aware that it may not cut properly
 }}
@@ Linje 62: / Linje 62: @@
 * Send a post work report on Slack #cnc when you are finished
-'''Current passcode: 20230502'''
+'''Current passcode: 20230606'''
 }}

← Eldre revisjon		Revisjonen fra 2. mai 2023 kl. 12:56
Linje 20:		Linje 20:

	* There is oil on the spoilboard and dust extraction shoe. This may stain your material. Use at own risk.		* There is oil on the spoilboard and dust extraction shoe. This may stain your material. Use at own risk.
		+	* The spanner fitting lock on the shopbot which enables the spindle is worn. Never use spindle without the spanner fitted in this lock.

	}}		}}

← Eldre revisjon		Revisjonen fra 2. mai 2023 kl. 12:38
Linje 480:		Linje 480:

	Kommando '''SF''' i kommandolinjen.		Kommando '''SF''' i kommandolinjen.
		+
		+	== Maintenance software ==
		+
		+	Passcode can be updated by editing shopbot.opt file at Program Files (x86)\ShopBot\Shopbot 3\shopbot.opt . It can also be disabled in this file.