OctoPrint/testing - Revisjonshistorikk

Tingo: /* Setup a SD card */ fixed a spelling error

2019-11-21T22:00:52Z

‎Setup a SD card: fixed a spelling error

2019-11-21T21:35:23Z

OctoPrint config files

2019-11-21T21:12:11Z

‎Start OctoPrint manually: example URL

2019-11-21T21:09:35Z

OctoPrint manual start

2019-11-21T21:03:08Z

‎Manual installation

2019-11-21T20:57:47Z

‎Manual installation: initial setup

2019-11-21T20:47:23Z

manual installation of OctoPrint

2019-11-21T17:11:38Z

laget underside OctoPrint/testing

Ny side

Tilbake til [[OctoPrint]].

Testing av OctoPrint.

[[Category:Octoprint]] [[Category:3D printing]]

@@ Linje 9: / Linje 9: @@
 Before putting the SD card into the Pi, do the following changes
-* allow ssh by creating a filer named 'ssh' on the boot partition (cd to mountpoint of boot partition, then do <code>touch ssh</code>)
+* allow ssh by creating a file named 'ssh' on the boot partition (cd to mountpoint of boot partition, then do <code>touch ssh</code>)
 * mount the <code>rootfs</code> partition and change the hostname (default is raspberrypi) by editing the files etc/hostname and etc/hosts (only the line with the same name ('raspberrypi')on that partition. The name will show up on the network as '''hostname.local''', so use '''hostname-print''' for example (shows up on the network as hostname-print.local). If you mount it on a machine running Linux, you can use <code>sudo vi etc/hostname</code>, and <code>sudo nano etc/hosts</code> to edit the files.

← Eldre revisjon		Revisjonen fra 21. nov. 2019 kl. 21:35
Linje 40:		Linje 40:

	the OctoPrint server is available on port 5000, example http://hostname-print.local:5000/		the OctoPrint server is available on port 5000, example http://hostname-print.local:5000/
		+
		+	== OctoPrint config files ==
		+	OctoPrint config files lives in <code>~/.octoprint</code>.
		+	config.yaml (and config.backup)
		+	users.yaml
		+	Printer profiles
		+	printerProfiles/_default.profile
		+	printerProfiles/prusa_i3_mk3s.profile
		+	there are other directories and files in the <code>~/.octoprint</code> directory too.

	== References ==		== References ==

@@ Linje 38: / Linje 38: @@
 == Start OctoPrint manually ==
 To start OctoPrint manually, log in as the user and do <code>~/OctoPrint/venv/bin/octoprint serve</code>. When you want to end the OctoPrint server, use '''Ctrl-C''' to stop it.
 == References ==

@@ Linje 35: / Linje 35: @@
   pip install pip --upgrade
   pip install octoprint
 == References ==

@@ Linje 18: / Linje 18: @@
 # change the password: <code>passwd</code>
 # check if the user is a member of the required groups, if not, add it. <code>sudo usermod -a -G tty pi</code>, <code>sudo usermod -a -G dialout pi</code>.
 == References ==

← Eldre revisjon		Revisjonen fra 21. nov. 2019 kl. 20:47
Linje 3:		Linje 3:
	Testing av OctoPrint.		Testing av OctoPrint.

		+	== Manual installation ==

		+	=== Setup a SD card ===
		+	Download Raspbian Lite (currently Raspbian Buster Lite<ref>[https://www.raspberrypi.org/downloads/raspbian/ raspberrypi.org - Raspbian]</ref>) and put onto a SD card (or microSD card if that is what your Raspberry Pi requires).
		+
		+	Before putting the SD card into the Pi, do the following changes
		+	* allow ssh by creating a filer named 'ssh' on the boot partition (cd to mountpoint of boot partition, then do <code>touch ssh</code>)
		+	* mount the <code>rootfs</code> partition and change the hostname (default is raspberrypi) by editing the files etc/hostname and etc/hosts (only the line with the same name ('raspberrypi')on that partition. The name will show up on the network as '''hostname.local''', so use '''hostname-print''' for example (shows up on the network as hostname-print.local). If you mount it on a machine running Linux, you can use <code>sudo vi etc/hostname</code>, and <code>sudo nano etc/hosts</code> to edit the files.
		+
		+	== References ==
		+	<references/>

	[[Category:Octoprint]] [[Category:3D printing]]		[[Category:Octoprint]] [[Category:3D printing]]