Metroplex 3D printer/testing - Revisjonshistorikk

Tingo: /* Test printing */ added a picture of the inside of the extruder

2020-01-23T19:30:27Z

‎Test printing: added a picture of the inside of the extruder

Tingo: /* Test printing */ more testing - the hobbed wheel on the extruder isn't turning as it should

2020-01-16T22:48:41Z

‎Test printing: more testing - the hobbed wheel on the extruder isn't turning as it should

Tingo: created page Metroplex 3D printer/testing

2020-01-16T22:16:37Z

created page Metroplex 3D printer/testing

Ny side

Tilbake til / back to [[Metroplex 3D printer]].

== Test printing ==

; 2020-01-17 : created a profile for the printer in PrusaSlicer, set up the printer with PLA and tried a test print. Result: looks like the printer nozzle clogged. Other observations: if you stop the print in OctoPrint when the cooling fan for the print is on, this fan doesn't stop when the print stop. Needs to be fixed.

@@ Linje 2: / Linje 2: @@
 == Test printing ==
 ; 2020-01-17 : ok, the problem isn't that the nozzle is clogged - the problem is that the extruder doesn't manage to feed the filament. If we feed manually (by pushing the filament) it works ok'ish. Furter investigations shows that the hobbed wheel on the extruder isn't turning. We need to disassemnble the extruder to get the wheel out and check the set screw on that axle. Won't happen tonight.
 : I created a profile for the printer in PrusaSlicer, set up the printer with PLA and tried a test print. Result: looks like the printer nozzle clogged. Other observations: if you stop the print in OctoPrint when the cooling fan for the print is on, this fan doesn't stop when the print stop. Needs to be fixed.

← Eldre revisjon		Revisjonen fra 16. jan. 2020 kl. 22:48
Linje 3:		Linje 3:
	== Test printing ==		== Test printing ==

−	; 2020-01-17 : created a profile for the printer in PrusaSlicer, set up the printer with PLA and tried a test print. Result: looks like the printer nozzle clogged. Other observations: if you stop the print in OctoPrint when the cooling fan for the print is on, this fan doesn't stop when the print stop. Needs to be fixed.	+	; 2020-01-17 : ok, the problem isn't that the nozzle is clogged - the problem is that the extruder doesn't manage to feed the filament. If we feed manually (by pushing the filament) it works ok'ish. Furter investigations shows that the hobbed wheel on the extruder isn't turning. We need to disassemnble the extruder to get the wheel out and check the set screw on that axle. Won't happen tonight.
		+
		+	: I created a profile for the printer in PrusaSlicer, set up the printer with PLA and tried a test print. Result: looks like the printer nozzle clogged. Other observations: if you stop the print in OctoPrint when the cooling fan for the print is on, this fan doesn't stop when the print stop. Needs to be fixed.