https://wiki.bitraf.no/w/index.php?action=history&feed=atom&title=CNC3-3018Pro%2Ftesting 2026-05-05T05:28:48Z Revisjonshistorikk for denne siden MediaWiki 1.32.0-rc.0 https://wiki.bitraf.no/w/index.php?title=CNC3-3018Pro/testing&diff=5432&oldid=prev 2019-06-06T20:37:20Z

<p>‎<span dir="auto"><span class="autocomment">Historikk: </span> Frest et lite adapterkort (P112 serial adapter)</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 6. jun. 2019 kl. 20:37</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l5" >Linje 5:</td> <td colspan="2" class="diff-lineno">Linje 5:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td></tr> <tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>; <del class="diffchange diffchange-inline">20191</del>-02-28 : laget et lite koblingskort for Metroplex (Monster Kossel'en vår), kun kontakter inn og ut. Første testet jeg med mitt eget v-bit 30 grader 0.1mm, 2 pass rundt banene, da ble det ingen baner igjen av de tynne banene. Så kjørte jeg Bitraf sitt standard v-bit 10 grader 0.1mm med 2 pass rundt banene. De tynne banene ble veldig tynne (men jeg har målt og alle banene er ok). Til slutt en test med samme bit (v-bit 10 grader 0.1mm) men bare ett pass rundt banene. Det ble faktisk bedre (og ja, alle baner er ok på det kortet også). Bilder:</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>; <ins class="diffchange diffchange-inline">2019-06-06 : laget et lite adapter-kort for en serieport på en P112 SBC. Kortet er bare kontakt inn og ut med baner som gjør at en &quot;pigtail&quot; en-til-en DB9-til-IDC 10 pins passer til kontakten på P112. Har brukt standard v-bit for fresing av baner (banene er 0.4 mm brede), 1.0mm drill for borring av hull, og en 0.4mm end mill for utskjøring av kortet (3 pass).</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">&lt;gallery&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">Fil:P112 ser adap pcb 1 20190606 192509.jpg| baner frest og hull borret</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">Fil:P112 ser adap pcb 2 20190606 195928.jpg| kretskortet er frest ut</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">Fil:P112 ser adap pcb closeup 20190606 201459.jpg| nærbilde av kretskortet i mikroskop. Måtte fjerne en del løse tråder.</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">Fil:P112 ser adap works 2 20190606 220758.jpg| adapter montert på P112 - funket på første forsøk!</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">&lt;/gallery&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">Som vanlig er mobilbildene mine ikke av de beste - lev med det. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 6. jun. 2019 kl. 22:36 (CEST)</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">; 2019</ins>-02-28 : laget et lite koblingskort for Metroplex (Monster Kossel'en vår), kun kontakter inn og ut. Første testet jeg med mitt eget v-bit 30 grader 0.1mm, 2 pass rundt banene, da ble det ingen baner igjen av de tynne banene. Så kjørte jeg Bitraf sitt standard v-bit 10 grader 0.1mm med 2 pass rundt banene. De tynne banene ble veldig tynne (men jeg har målt og alle banene er ok). Til slutt en test med samme bit (v-bit 10 grader 0.1mm) men bare ett pass rundt banene. Det ble faktisk bedre (og ja, alle baner er ok på det kortet også). Bilder:</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;gallery&gt;</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;gallery&gt;</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Fil:Test with v-bit 30 degrees 20190228 220046.jpg</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Fil:Test with v-bit 30 degrees 20190228 220046.jpg</div></td></tr> </table>

Tingo https://wiki.bitraf.no/w/index.php?title=CNC3-3018Pro/testing&diff=5217&oldid=prev 2019-02-28T21:28:01Z

<p>‎<span dir="auto"><span class="autocomment">Historikk: </span> nytt kretskort frest.</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 28. feb. 2019 kl. 21:28</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l5" >Linje 5:</td> <td colspan="2" class="diff-lineno">Linje 5:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">; 20191-02-28 : laget et lite koblingskort for Metroplex (Monster Kossel'en vår), kun kontakter inn og ut. Første testet jeg med mitt eget v-bit 30 grader 0.1mm, 2 pass rundt banene, da ble det ingen baner igjen av de tynne banene. Så kjørte jeg Bitraf sitt standard v-bit 10 grader 0.1mm med 2 pass rundt banene. De tynne banene ble veldig tynne (men jeg har målt og alle banene er ok). Til slutt en test med samme bit (v-bit 10 grader 0.1mm) men bare ett pass rundt banene. Det ble faktisk bedre (og ja, alle baner er ok på det kortet også). Bilder:</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">&lt;gallery&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Test with v-bit 30 degrees 20190228 220046.jpg</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:V-bit 10 degrees 2pass 20190228 220111.jpg</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:V-bit 10 degrees 1pass 20190228 220122.jpg</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">&lt;/gallery&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">det var kveldens test av PCB-fresen. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 28. feb. 2019 kl. 22:27 (CET)</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2019-02-08 : frest ennå en versjon. Denne gang på 150 mm/min feed rate på banene. Men - knakk tre bits (0.1 mm 10 graders v-bit). Byttet til eget bit: 0.1mm 30 graders v-bit (uten å endre jobben) og fikk kjørt den. Resultatet er fungerende, men ikke &quot;bra&quot;. Kan også skyldes de tre forsøkene hvor bit'ene knakk. Bilder</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2019-02-08 : frest ennå en versjon. Denne gang på 150 mm/min feed rate på banene. Men - knakk tre bits (0.1 mm 10 graders v-bit). Byttet til eget bit: 0.1mm 30 graders v-bit (uten å endre jobben) og fikk kjørt den. Resultatet er fungerende, men ikke &quot;bra&quot;. Kan også skyldes de tre forsøkene hvor bit'ene knakk. Bilder</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;gallery&gt;</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;gallery&gt;</div></td></tr> </table>

Tingo https://wiki.bitraf.no/w/index.php?title=CNC3-3018Pro/testing&diff=5134&oldid=prev 2019-02-08T16:46:17Z

<p>‎<span dir="auto"><span class="autocomment">Historikk: </span> mer frese-erfaring</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 8. feb. 2019 kl. 16:46</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l5" >Linje 5:</td> <td colspan="2" class="diff-lineno">Linje 5:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">; 2019-02-08 : frest ennå en versjon. Denne gang på 150 mm/min feed rate på banene. Men - knakk tre bits (0.1 mm 10 graders v-bit). Byttet til eget bit: 0.1mm 30 graders v-bit (uten å endre jobben) og fikk kjørt den. Resultatet er fungerende, men ikke &quot;bra&quot;. Kan også skyldes de tre forsøkene hvor bit'ene knakk. Bilder</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">&lt;gallery&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Baner 1 20190208 160541.jpg| baner frest</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Baner 2 20190208 160546.jpg| baner, bilde 2</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Hull 1 20190208 161517.jpg| hull er borret</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Hull 2 20190208 162648.jpg| hull, bilde 2</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:For lite 1 20190208 165108.jpg| et par steder er banene ikke frest helt igjennom</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:For lite 2 20190208 165207.jpg| litt dårlig kant på baner</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">&lt;/gallery&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Har ikke loddet kortet ennå. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 8. feb. 2019 kl. 17:45 (CET)</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2019-02-07 : frese ny versjon. Denne gange prøvde jeg med 300 mm/min feed rate på banene, det gikk ikke så bra (forrige gang var det 150 mm/min feedrate på baner).</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2019-02-07 : frese ny versjon. Denne gange prøvde jeg med 300 mm/min feed rate på banene, det gikk ikke så bra (forrige gang var det 150 mm/min feedrate på baner).</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;gallery&gt;</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;gallery&gt;</div></td></tr> </table>

Tingo https://wiki.bitraf.no/w/index.php?title=CNC3-3018Pro/testing&diff=5117&oldid=prev 2019-02-07T18:16:26Z

<p>‎<span dir="auto"><span class="autocomment">Historikk: </span> mer fresing</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 7. feb. 2019 kl. 18:16</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l5" >Linje 5:</td> <td colspan="2" class="diff-lineno">Linje 5:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">; 2019-02-07 : frese ny versjon. Denne gange prøvde jeg med 300 mm/min feed rate på banene, det gikk ikke så bra (forrige gang var det 150 mm/min feedrate på baner).</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">&lt;gallery&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:After drilling and milling 20190207 154305.jpg| hull borret, baner frest</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:After board cutout 20190207 161711.jpg| kretskortet skjært ut</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Board cutout 20190207 162003.jpg| cutout fjerner også tapen på sidene, da kan man ikke bruke den for å ta løs kortet etterpå.</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Offerplate plassering 20190207 161737.jpg| plassering av kortet på offerplata (ikke viktig).</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">&lt;/gallery&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Så da vet jeg det - 150 mm/min er bedre enn 300 mm/min når man skal frese baner. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 7. feb. 2019 kl. 19:16 (CET)</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2019-02-01 : fresing av kretskort - første fresing av et fullt through-hole kretskort. Ser ut som jeg har fått laget et funksjonelt kort nå. Bilder:</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2019-02-01 : fresing av kretskort - første fresing av et fullt through-hole kretskort. Ser ut som jeg har fått laget et funksjonelt kort nå. Bilder:</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;gallery&gt;</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;gallery&gt;</div></td></tr> </table>

Tingo https://wiki.bitraf.no/w/index.php?title=CNC3-3018Pro/testing&diff=5100&oldid=prev 2019-02-01T17:58:11Z

<p>‎<span dir="auto"><span class="autocomment">Historikk: </span> frest første through-hole kretskort som ser ut til å være funksjonelt</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 1. feb. 2019 kl. 17:58</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l5" >Linje 5:</td> <td colspan="2" class="diff-lineno">Linje 5:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">; 2019-02-01 : fresing av kretskort - første fresing av et fullt through-hole kretskort. Ser ut som jeg har fått laget et funksjonelt kort nå. Bilder:</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">&lt;gallery&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:PCB after milling 1 20190201 172525.jpg</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:PCB after milling 2 20190201 172532.jpg</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:PCB after milling 3 20190201 172551.jpg</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">&lt;/gallery&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Når man ser på kretskortet under mikroskopetså ser man detaljene, og hvor lite &quot;pent&quot; det er:</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">&lt;gallery&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Under microscope text 20190201 174224.jpg| tekst - ble ikke bra</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Under microscope bc548 small pads 20190201 174239.jpg| TO-92 footprint til en transistor - burde hatt større pads</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Under microscope scart connector 20190201 174312.jpg| SCART kontakten  har ekstra store pinner - den ser grei ut</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Under mcroscope uneven pads and tracks 20190201 174400.jpg| baner og pads er ujevne noen steder</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Under microscope uneven but functional 20190201 174417.jpg| ujevne, men funksjonelle baner og pads</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Under microscope round vs square pads 20190201 174432.jpg| firkantede vs. runde pads</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Under microscope more pads and tracks 20190201 174445.jpg| flere baner og pads</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">&lt;/gallery&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Likevel, det ser ut som om dette kretskortet kan funke. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 1. feb. 2019 kl. 18:57 (CET)</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2019-01-30 : vi ([[User:jonnor|Jon]] og jeg) testet borring av hull og deretter fresing av baner. Gikk bra helt til kortet løsnet og flyttet på seg (vi hadde brukt en tape som var for dårlig til å feste kortet med). Bilder:</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2019-01-30 : vi ([[User:jonnor|Jon]] og jeg) testet borring av hull og deretter fresing av baner. Gikk bra helt til kortet løsnet og flyttet på seg (vi hadde brukt en tape som var for dårlig til å feste kortet med). Bilder:</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;gallery&gt;</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;gallery&gt;</div></td></tr> </table>

Tingo https://wiki.bitraf.no/w/index.php?title=CNC3-3018Pro/testing&diff=5059&oldid=prev 2019-01-30T19:54:02Z

<p>‎<span dir="auto"><span class="autocomment">Historikk: </span> testing: borre hull og frese baner</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 30. jan. 2019 kl. 19:54</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l5" >Linje 5:</td> <td colspan="2" class="diff-lineno">Linje 5:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">; 2019-01-30 : vi ([[User:jonnor|Jon]] og jeg) testet borring av hull og deretter fresing av baner. Gikk bra helt til kortet løsnet og flyttet på seg (vi hadde brukt en tape som var for dårlig til å feste kortet med). Bilder:</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">&lt;gallery&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Testkort 1 20190130 183734.jpg</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Testkort 2 20190130 183738.jpg</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">&lt;/gallery&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">også fått mer erfaring med FlatCAM. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 30. jan. 2019 kl. 20:53 (CET)</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2018-11-28 : testing spindle speed. The spindle is supposed to do 10k RPM at 24V. Using UGS. First change max spindle speed to 10000</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2018-11-28 : testing spindle speed. The spindle is supposed to do 10k RPM at 24V. Using UGS. First change max spindle speed to 10000</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>  $30=10000</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>  $30=10000</div></td></tr> </table>

Tingo https://wiki.bitraf.no/w/index.php?title=CNC3-3018Pro/testing&diff=4707&oldid=prev 2018-11-28T15:44:36Z

<p>‎<span dir="auto"><span class="autocomment">Historikk: </span> tested the lowest (reliable) spindle start speed</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 28. nov. 2018 kl. 15:44</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l23" >Linje 23:</td> <td colspan="2" class="diff-lineno">Linje 23:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>  ok</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>  ok</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>the sound of the motor changes at least. I don't have an instrument for measuring the rotational speed of the spindle here, but based on the sound, the spindle is moving faster with larger numbers. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 28. nov. 2018 kl. 15:51 (CET)</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>the sound of the motor changes at least. I don't have an instrument for measuring the rotational speed of the spindle here, but based on the sound, the spindle is moving faster with larger numbers. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 28. nov. 2018 kl. 15:51 (CET)</div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">: spindle speed - it looks like 400 rpm is the lowest setting that you can start the spindle at (M4 S400). If I try to start it with a lower setting (for example M4 S300) the spindle will not always turn. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 28. nov. 2018 kl. 16:44 (CET)</ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2018-11-16 : PCB fresing - Jon og jeg testet med FlatCAM, det funker ganske bra, selv med manuell posisjonering av X, Y og Z. Bilder (beklager, dårlig kvalitet)</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2018-11-16 : PCB fresing - Jon og jeg testet med FlatCAM, det funker ganske bra, selv med manuell posisjonering av X, Y og Z. Bilder (beklager, dårlig kvalitet)</div></td></tr> </table>

Tingo https://wiki.bitraf.no/w/index.php?title=CNC3-3018Pro/testing&diff=4706&oldid=prev 2018-11-28T14:51:25Z

<p>‎<span dir="auto"><span class="autocomment">Historikk: </span> tested spindle speed.</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 28. nov. 2018 kl. 14:51</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l5" >Linje 5:</td> <td colspan="2" class="diff-lineno">Linje 5:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">; 2018-11-28 : testing spindle speed. The spindle is supposed to do 10k RPM at 24V. Using UGS. First change max spindle speed to 10000</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> $30=10000</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">and then test it by sending commands to start the spindle and change the speed</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> &gt;&gt;&gt; M4 S1000</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> ok</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> &gt;&gt;&gt; S2000</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> ok</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> &gt;&gt;&gt; S3000</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> ok</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> &gt;&gt;&gt; S5000</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> ok</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> &gt;&gt;&gt; S8000</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> ok</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> &gt;&gt;&gt; S10000</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> ok</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> &gt;&gt;&gt; M5</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> ok</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">the sound of the motor changes at least. I don't have an instrument for measuring the rotational speed of the spindle here, but based on the sound, the spindle is moving faster with larger numbers. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 28. nov. 2018 kl. 15:51 (CET)</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2018-11-16 : PCB fresing - Jon og jeg testet med FlatCAM, det funker ganske bra, selv med manuell posisjonering av X, Y og Z. Bilder (beklager, dårlig kvalitet)</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2018-11-16 : PCB fresing - Jon og jeg testet med FlatCAM, det funker ganske bra, selv med manuell posisjonering av X, Y og Z. Bilder (beklager, dårlig kvalitet)</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;gallery&gt;</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;gallery&gt;</div></td></tr> </table>

Tingo https://wiki.bitraf.no/w/index.php?title=CNC3-3018Pro/testing&diff=4649&oldid=prev 2018-11-16T22:13:04Z

<p>‎<span dir="auto"><span class="autocomment">Historikk: </span> bilder av kretskortfresing</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 16. nov. 2018 kl. 22:13</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l7" >Linje 7:</td> <td colspan="2" class="diff-lineno">Linje 7:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2018-11-16 : PCB fresing - Jon og jeg testet med FlatCAM, det funker ganske bra, selv med manuell posisjonering av X, Y og Z. Bilder (beklager, dårlig kvalitet)</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2018-11-16 : PCB fresing - Jon og jeg testet med FlatCAM, det funker ganske bra, selv med manuell posisjonering av X, Y og Z. Bilder (beklager, dårlig kvalitet)</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;gallery&gt;</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;gallery&gt;</div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Cnc3-3018Pro pcb test ready.jpg|Klar for testfresing av kretskort</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Cnc3-3018Pro pcb test 1 og 2.jpg|, resultat av de to første fresetestene.</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fil:Cnc3-3018Pro pcb test 1 og 2-2.jpg|et annet bilde av testresultatene.</ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;/gallery&gt;</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;/gallery&gt;</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>dette funker jo. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 16. nov. 2018 kl. 23:03 (CET)</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>dette funker jo. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 16. nov. 2018 kl. 23:03 (CET)</div></td></tr> </table>

Tingo https://wiki.bitraf.no/w/index.php?title=CNC3-3018Pro/testing&diff=4645&oldid=prev 2018-11-16T22:03:57Z

<p>‎<span dir="auto"><span class="autocomment">Historikk: </span> testing av PCB-fresing</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 16. nov. 2018 kl. 22:03</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l5" >Linje 5:</td> <td colspan="2" class="diff-lineno">Linje 5:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td></tr> <tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>; 2018-11-16 : <del class="diffchange diffchange-inline">GRBl </del>- testet homing ('$H), da får man denne feilmeldingen:</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>; 2018-11-16 : <ins class="diffchange diffchange-inline">PCB fresing - Jon og jeg testet med FlatCAM, det funker ganske bra, selv med manuell posisjonering av X, Y og Z. Bilder (beklager, dårlig kvalitet)</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">&lt;gallery&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">&lt;/gallery&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">dette funker jo. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 16. nov. 2018 kl. 23:03 (CET)</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">; 2018-11-16 : GRBL </ins>- testet homing ('$H), da får man denne feilmeldingen:</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>  &gt;&gt;&gt; $H</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>  &gt;&gt;&gt; $H</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>  An error was detected while sending '$H': (error:5) Homing cycle failure. Homing is not enabled via settings. Streaming has been paused.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>  An error was detected while sending '$H': (error:5) Homing cycle failure. Homing is not enabled via settings. Streaming has been paused.</div></td></tr> </table>

Tingo