https://wiki.bitraf.no/w/index.php?action=history&feed=atom&title=Bumblebee_3D_printer 2026-05-01T06:53:22Z Revisjonshistorikk for denne siden MediaWiki 1.32.0-rc.0 https://wiki.bitraf.no/w/index.php?title=Bumblebee_3D_printer&diff=9516&oldid=prev 2023-09-27T16:55:15Z

<p>‎<span dir="auto"><span class="autocomment">Programvare: </span> PrusaSlicer er anbefalt</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 27. sep. 2023 kl. 16:55</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l49" >Linje 49:</td> <td colspan="2" class="diff-lineno">Linje 49:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Programvare ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Programvare ==</div></td></tr> <tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Vi anbefaler at man bruker <del class="diffchange diffchange-inline">PrusaControl </del>for denne typen printer. PrusaControl er et vedig enkelt program å bruke, og det er vanskelig å &quot;rote seg bort&quot; med feil innstillinger og lignende.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Vi anbefaler at man bruker <ins class="diffchange diffchange-inline">'''PrusaSlicer''' </ins>for denne typen printer. PrusaControl er et vedig enkelt program å bruke, og det er vanskelig å &quot;rote seg bort&quot; med feil innstillinger og lignende.</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== &lt;s&gt;PrusaControl ([https://github.com/prusa3d/PrusaControl/commit/0aba11602186c388b9eae08744047563a9f90848 avskrecver/depricated])&lt;/s&gt; ===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== &lt;s&gt;PrusaControl ([https://github.com/prusa3d/PrusaControl/commit/0aba11602186c388b9eae08744047563a9f90848 avskrecver/depricated])&lt;/s&gt; ===</div></td></tr> </table>

Tingo https://wiki.bitraf.no/w/index.php?title=Bumblebee_3D_printer&diff=9065&oldid=prev 2023-02-16T20:34:34Z

<p>‎<span dir="auto"><span class="autocomment">Programvare: </span> markup</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 16. feb. 2023 kl. 20:34</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l51" >Linje 51:</td> <td colspan="2" class="diff-lineno">Linje 51:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Vi anbefaler at man bruker PrusaControl for denne typen printer. PrusaControl er et vedig enkelt program å bruke, og det er vanskelig å &quot;rote seg bort&quot; med feil innstillinger og lignende.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Vi anbefaler at man bruker PrusaControl for denne typen printer. PrusaControl er et vedig enkelt program å bruke, og det er vanskelig å &quot;rote seg bort&quot; med feil innstillinger og lignende.</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>&lt;s&gt;<del class="diffchange diffchange-inline">=== </del>PrusaControl ([https://github.com/prusa3d/PrusaControl/commit/0aba11602186c388b9eae08744047563a9f90848 avskrecver/depricated]) <del class="diffchange diffchange-inline">===</del>&lt;/s&gt;</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">=== </ins>&lt;s&gt;PrusaControl ([https://github.com/prusa3d/PrusaControl/commit/0aba11602186c388b9eae08744047563a9f90848 avskrecver/depricated])&lt;/s&gt; <ins class="diffchange diffchange-inline">===</ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;s&gt;Prusa sier om PrusaControl&lt;ref&gt;[https://prusacontrol.org/ PrusaControl]&lt;/ref&gt; at det er den enkleste måten å få perfekte print med en '''Original Prusa i3 MK3''' (og MK2S/2.5). Programmet finnes for Windows, macOS og Linux. Linux-versjonen er et AppImage, bare og laste ned, sette fila som kjør (&quot;executable&quot;) og så er du klar.&lt;/s&gt;</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;s&gt;Prusa sier om PrusaControl&lt;ref&gt;[https://prusacontrol.org/ PrusaControl]&lt;/ref&gt; at det er den enkleste måten å få perfekte print med en '''Original Prusa i3 MK3''' (og MK2S/2.5). Programmet finnes for Windows, macOS og Linux. Linux-versjonen er et AppImage, bare og laste ned, sette fila som kjør (&quot;executable&quot;) og så er du klar.&lt;/s&gt;</div></td></tr> <!-- diff cache key mediawiki:diff::1.12:old-9064:rev-9065 --> </table>

Kid https://wiki.bitraf.no/w/index.php?title=Bumblebee_3D_printer&diff=9064&oldid=prev 2023-02-16T19:50:38Z

<p>‎<span dir="auto"><span class="autocomment">PrusaControl: </span> avskrevet/depricated</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 16. feb. 2023 kl. 19:50</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l51" >Linje 51:</td> <td colspan="2" class="diff-lineno">Linje 51:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Vi anbefaler at man bruker PrusaControl for denne typen printer. PrusaControl er et vedig enkelt program å bruke, og det er vanskelig å &quot;rote seg bort&quot; med feil innstillinger og lignende.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Vi anbefaler at man bruker PrusaControl for denne typen printer. PrusaControl er et vedig enkelt program å bruke, og det er vanskelig å &quot;rote seg bort&quot; med feil innstillinger og lignende.</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>=== PrusaControl ===</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">&lt;s&gt;</ins>=== PrusaControl <ins class="diffchange diffchange-inline">([https://github.com/prusa3d/PrusaControl/commit/0aba11602186c388b9eae08744047563a9f90848 avskrecver/depricated]) </ins>===<ins class="diffchange diffchange-inline">&lt;/s&gt;</ins></div></td></tr> <tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Prusa sier om PrusaControl&lt;ref&gt;[https://prusacontrol.org/ PrusaControl]&lt;/ref&gt; at det er den enkleste måten å få perfekte print med en '''Original Prusa i3 MK3''' (og MK2S/2.5). Programmet finnes for Windows, macOS og Linux. Linux-versjonen er et AppImage, bare og laste ned, sette fila som kjør (&quot;executable&quot;) og så er du klar.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">&lt;s&gt;</ins>Prusa sier om PrusaControl&lt;ref&gt;[https://prusacontrol.org/ PrusaControl]&lt;/ref&gt; at det er den enkleste måten å få perfekte print med en '''Original Prusa i3 MK3''' (og MK2S/2.5). Programmet finnes for Windows, macOS og Linux. Linux-versjonen er et AppImage, bare og laste ned, sette fila som kjør (&quot;executable&quot;) og så er du klar.<ins class="diffchange diffchange-inline">&lt;/s&gt;</ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Cura ===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Cura ===</div></td></tr> </table>

Kid https://wiki.bitraf.no/w/index.php?title=Bumblebee_3D_printer&diff=8970&oldid=prev 2022-12-28T13:27:05Z

<p>‎<span dir="auto"><span class="autocomment">Historikk: </span> avrdude is needed for firmware upgrades</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 28. des. 2022 kl. 13:27</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l107" >Linje 107:</td> <td colspan="2" class="diff-lineno">Linje 107:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">; 2022-12-28 : installed avrdude (via &lt;code&gt;sudo apt install avrdude&lt;/code&gt;) to facilitate firmware upgrades. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 28. des. 2022 kl. 14:26 (CET)</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2022-12-27 : the printer reports itself as a MK3S printer. Perhaps this was part of the MMU upgrade? [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. des. 2022 kl. 16:23 (CET)</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2022-12-27 : the printer reports itself as a MK3S printer. Perhaps this was part of the MMU upgrade? [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. des. 2022 kl. 16:23 (CET)</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> </table>

Tingo https://wiki.bitraf.no/w/index.php?title=Bumblebee_3D_printer&diff=8950&oldid=prev 2022-12-27T15:23:46Z

<p>‎<span dir="auto"><span class="autocomment">Historikk: </span> bumblebee reports that it is an MK3S printer</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 27. des. 2022 kl. 15:23</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l107" >Linje 107:</td> <td colspan="2" class="diff-lineno">Linje 107:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">; 2022-12-27 : the printer reports itself as a MK3S printer. Perhaps this was part of the MMU upgrade? [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. des. 2022 kl. 16:23 (CET)</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2022-12-27 : bumblebee is missing a usb cable from the Pi to the printer (for firmware upgrades). [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. des. 2022 kl. 14:21 (CET)</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2022-12-27 : bumblebee is missing a usb cable from the Pi to the printer (for firmware upgrades). [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. des. 2022 kl. 14:21 (CET)</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> </table>

Tingo https://wiki.bitraf.no/w/index.php?title=Bumblebee_3D_printer&diff=8947&oldid=prev 2022-12-27T14:04:53Z

<p>‎<span dir="auto"><span class="autocomment">Historikk: </span> not forget - restored configuration from a backup</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 27. des. 2022 kl. 14:04</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l121" >Linje 121:</td> <td colspan="2" class="diff-lineno">Linje 121:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;/pre&gt;</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;/pre&gt;</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>the lines &lt;code&gt;start_x=1&lt;/code&gt; and &lt;code&gt;gpu_mem=128&lt;/code&gt; were already there. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. des. 2022 kl. 13:27 (CET)</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>the lines &lt;code&gt;start_x=1&lt;/code&gt; and &lt;code&gt;gpu_mem=128&lt;/code&gt; were already there. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. des. 2022 kl. 13:27 (CET)</div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">: restored the configuration from a backup. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. des. 2022 kl. 15:04 (CET)</ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2022-12-22 : OctoPrint - enabled the Backup plugin and did a backup. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 22. des. 2022 kl. 19:03 (CET)</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2022-12-22 : OctoPrint - enabled the Backup plugin and did a backup. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 22. des. 2022 kl. 19:03 (CET)</div></td></tr> </table>

Tingo https://wiki.bitraf.no/w/index.php?title=Bumblebee_3D_printer&diff=8945&oldid=prev 2022-12-27T13:22:07Z

<p>‎<span dir="auto"><span class="autocomment">Historikk: </span> usb cable missing</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 27. des. 2022 kl. 13:22</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l107" >Linje 107:</td> <td colspan="2" class="diff-lineno">Linje 107:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">; 2022-12-27 : bumblebee is missing a usb cable from the Pi to the printer (for firmware upgrades). [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. des. 2022 kl. 14:21 (CET)</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2022-12-27 : OctoPrint - wrote OctoPi 0.18.0 to a new microSD card and installed in the printer. Configuration: &lt;code&gt;/boot/cmdline.txt&lt;/code&gt; - removed the serial console. Afterwards it looks like this:</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2022-12-27 : OctoPrint - wrote OctoPi 0.18.0 to a new microSD card and installed in the printer. Configuration: &lt;code&gt;/boot/cmdline.txt&lt;/code&gt; - removed the serial console. Afterwards it looks like this:</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;pre&gt;</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;pre&gt;</div></td></tr> </table>

Tingo https://wiki.bitraf.no/w/index.php?title=Bumblebee_3D_printer&diff=8944&oldid=prev 2022-12-27T13:01:01Z

<p>‎<span dir="auto"><span class="autocomment">OctoPrint: </span> it has OctoPi 0.18.0 and OctoPrint 1.8.6 now</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 27. des. 2022 kl. 13:01</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l90" >Linje 90:</td> <td colspan="2" class="diff-lineno">Linje 90:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== OctoPrint ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== OctoPrint ==</div></td></tr> <tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* OctoPrint: 1.6<del class="diffchange diffchange-inline">.1</del></div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* OctoPrint: 1<ins class="diffchange diffchange-inline">.8</ins>.6</div></td></tr> <tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* OctoPi: 0.<del class="diffchange diffchange-inline">17</del>.0</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* OctoPi: 0.<ins class="diffchange diffchange-inline">18</ins>.0</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>OctoPrint&lt;ref&gt;[https://octoprint.org/ OctoPrint]&lt;/ref&gt; sier at anbefalt hardware er en Raspberry Pi&lt;ref&gt;[https://www.raspberrypi.org/ RaspberryPi.org]&lt;/ref&gt; 3B eller 3B+, og at Raspberry Pi Zero W ikke er anbefalt, på grunn av problemer med ytelsen når trådløst nett (WiFi) på Zero'n brukes. Problemet som gjerne oppstår, er på modeller der wifi/ethernet er kobla på USB internt på pi-en og man kjører opp OctoPrint med video over USB. Dette vil overbelaste USB-hubben internt og føre til hakkete video og utskrifter som ikke går jevnt og dermed blir stygge. Innebygget pi-kamera og/eller wifi/ethernet som ikke går på felles USB vil omgå dette problemet.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>OctoPrint&lt;ref&gt;[https://octoprint.org/ OctoPrint]&lt;/ref&gt; sier at anbefalt hardware er en Raspberry Pi&lt;ref&gt;[https://www.raspberrypi.org/ RaspberryPi.org]&lt;/ref&gt; 3B eller 3B+, og at Raspberry Pi Zero W ikke er anbefalt, på grunn av problemer med ytelsen når trådløst nett (WiFi) på Zero'n brukes. Problemet som gjerne oppstår, er på modeller der wifi/ethernet er kobla på USB internt på pi-en og man kjører opp OctoPrint med video over USB. Dette vil overbelaste USB-hubben internt og føre til hakkete video og utskrifter som ikke går jevnt og dermed blir stygge. Innebygget pi-kamera og/eller wifi/ethernet som ikke går på felles USB vil omgå dette problemet.</div></td></tr> </table>

Tingo https://wiki.bitraf.no/w/index.php?title=Bumblebee_3D_printer&diff=8943&oldid=prev 2022-12-27T12:27:57Z

<p>‎<span dir="auto"><span class="autocomment">Historikk: </span> updated /boot/config.txt</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 27. des. 2022 kl. 12:27</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l112" >Linje 112:</td> <td colspan="2" class="diff-lineno">Linje 112:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>console=tty1 root=PARTUUID=8034ca10-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>console=tty1 root=PARTUUID=8034ca10-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;/pre&gt; [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. des. 2022 kl. 13:22 (CET)</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;/pre&gt; [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. des. 2022 kl. 13:22 (CET)</div></td></tr> <tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div> </div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">and /boot/config.txt - added the following lines to the '[all]' section:</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">&lt;pre&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">dtoverlay=pi3-miniuart-bt</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">force_turbo=1</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">over_voltage=8</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">&lt;/pre&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">the lines &lt;code&gt;start_x=1&lt;/code&gt; and &lt;code&gt;gpu_mem=128&lt;/code&gt; were already there. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. des. 2022 kl. 13:27 (CET)</ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2022-12-22 : OctoPrint - enabled the Backup plugin and did a backup. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 22. des. 2022 kl. 19:03 (CET)</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2022-12-22 : OctoPrint - enabled the Backup plugin and did a backup. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 22. des. 2022 kl. 19:03 (CET)</div></td></tr> </table>

Tingo https://wiki.bitraf.no/w/index.php?title=Bumblebee_3D_printer&diff=8942&oldid=prev 2022-12-27T12:22:31Z

<p>‎<span dir="auto"><span class="autocomment">Historikk: </span> OctoPi 0.18.0 installed</span></p> <table class="diff diff-contentalign-left" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="nb"> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Eldre revisjon</td> <td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revisjonen fra 27. des. 2022 kl. 12:22</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l107" >Linje 107:</td> <td colspan="2" class="diff-lineno">Linje 107:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Historikk ==</div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">; 2022-12-27 : OctoPrint - wrote OctoPi 0.18.0 to a new microSD card and installed in the printer. Configuration: &lt;code&gt;/boot/cmdline.txt&lt;/code&gt; - removed the serial console. Afterwards it looks like this:</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">&lt;pre&gt;</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">pi@bumblebee:~ $ more /boot/cmdline.txt</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">console=tty1 root=PARTUUID=8034ca10-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">&lt;/pre&gt; [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 27. des. 2022 kl. 13:22 (CET)</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2022-12-22 : OctoPrint - enabled the Backup plugin and did a backup. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 22. des. 2022 kl. 19:03 (CET)</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>; 2022-12-22 : OctoPrint - enabled the Backup plugin and did a backup. [[Bruker:Tingo|Tingo]] ([[Brukerdiskusjon:Tingo|diskusjon]]) 22. des. 2022 kl. 19:03 (CET)</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> </table>

Tingo